Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



The Lee-Tseung Lead Out Theory

Started by ltseung888, July 20, 2007, 02:43:44 AM

Previous topic - Next topic

0 Members and 59 Guests are viewing this topic.

Print
Go Down Pages 1 ... 64 65 66 67 68 ... 1075
User actions

ltseung888

#325
September 20, 2007, 09:35:09 PM
please see:

http://www.overunity.com/index.php/topic,3260.msg50656.html#msg50656

on the drawback of the existing Chas Campbell Flywheel device.

It looks like that the Lee-Tseung Lead Out theory can explain it and show how to improve it.

Lawrence Tseung
Pulse Rotation consideration Leads Out direction of improvement for the Chas Campbell Device.
Compressible Fluids are Mechanical Energy Carriers. Air is not a fuel but is an energy carrier. (See reply 1097)
Gravitational or Electron Motion Energy can be Lead Out via oscillation, vibration, rotation or flux change systems.  We need to apply pulse force (Lee-Tseung Pulls) at the right time. (See reply 1106 and 2621)
1150 describes the Flying Saucer.  This will provide incredible prosperity.  Beware of the potential destructive powers.

ltseung888

#326
September 21, 2007, 06:30:26 AM
Quote

Calculation based on Dr. Liang Xingren Car         

Mass in Kg      28   
Radius in Meters      0.4   
Rate of revolution in RPM      4500   

Effective rolling velocity in m/s of Cylinder v = 2*pi* r * RPM/60   
188.496         

Stored Energy of Cylinder = 1/2 * m * v * v in Newton-meter (joule)
497430.3882         

"Assume that such energy can be drained or supplied within x sec, power  in Newton-meter/second (watt)"         
165810.1294      if x =    3

Assume 745.7 watts = 1 horse power         
The Dr. Liang Car in Horse Power
222

I have done the spreadsheet to estimate the horse power of a Pulse Motor based on the known or estimated values of the Dr. Liang car.
The car claimed to have a HP of 188.

The spreadsheet gave a figure of 222.  This means that the Dr. Liang Car is within the rim of possiblilty.  The spreadsheet is attached.  You are welcome to play with it and use it for other pulse motors.
Compressible Fluids are Mechanical Energy Carriers. Air is not a fuel but is an energy carrier. (See reply 1097)
Gravitational or Electron Motion Energy can be Lead Out via oscillation, vibration, rotation or flux change systems.  We need to apply pulse force (Lee-Tseung Pulls) at the right time. (See reply 1106 and 2621)
1150 describes the Flying Saucer.  This will provide incredible prosperity.  Beware of the potential destructive powers.

ltseung888

#327
September 22, 2007, 07:34:10 PM
The preliminary Chas Campbell Flywheel Generator report.

Please see:
http://www.overunity.com/index.php/topic,3260.msg50900.html#msg50900

Reply to comments from Hans:
Quote
*** Note:  The Lead-Out is best at high rotational speed.  The Lead-Out energy at low speed is very low.  Thus in the Liang motor, a separate starting motor is used to get the Cylinder to the designed speed of 4500 rpm.  (Experiments showed that without the Starting Motor, the IC pulses just could not start the rotation!) 

The Equilibrium Rotational Rate can be maintained with just a small percentage of ICs taking part in the Pulse.  For example, there are 800 IC pairs.  The number of IC interactions required to maintain equilibrium rotational speed at no external load may be 50.  (Another way of maintaining the equilibrium rotational speed may be to have 100 ICs Pulsing at half the previous rate). When the external load increases, the program can pulse up to an additional 750 pairs to increase the Pulse Force.  That could keep the cylinder to rotate at approximately the same speed or even higher.   

The Energy drained or supplied at such high rotational rates is very different from what is experienced in daily life.

Regards,

Lawrence Tseung
Energy Lead Out at high Pulse or Rotational Rates is very different from what we experience in our daily lives.
Compressible Fluids are Mechanical Energy Carriers. Air is not a fuel but is an energy carrier. (See reply 1097)
Gravitational or Electron Motion Energy can be Lead Out via oscillation, vibration, rotation or flux change systems.  We need to apply pulse force (Lee-Tseung Pulls) at the right time. (See reply 1106 and 2621)
1150 describes the Flying Saucer.  This will provide incredible prosperity.  Beware of the potential destructive powers.

ltseung888

#328
September 23, 2007, 07:42:53 AM
Phone Conversation with Wang Shum Ho.

Quote
Tseung: "The Mid-Autumn festival is coming in a few days.  Are you having any special celebrations??

Wang: ?Thank you for calling.  I am in Beijing working hard with others to plan for the IPO next year.  There is so much to do.  What is the progress on your side??

Tseung: ?I am working with the overunity group on the evaluation of the inventions from Chas Campbell of Australia.  It looks like that he has a very early version of an Electricity Magnifier.  He has not written the program to vary Input Power with changes in External Load yet.?

Wang: ?I do not worry about him as a potential competitor.  The EBM and the Pulse Motor are well ahead of him.  Your disclosing the possibility of building the Flying Saucer with another ring around the Pulse Motor is very stimulating.  Good luck.?

It appears to me that Newman, Bedini, Searl etc. may not realize the importance of program control to match the Input to the External Load yet.

Lawrence Tseung
Magnet rotating around the Pulsing Coils Leads Out possibility of the Flying Saucer
Compressible Fluids are Mechanical Energy Carriers. Air is not a fuel but is an energy carrier. (See reply 1097)
Gravitational or Electron Motion Energy can be Lead Out via oscillation, vibration, rotation or flux change systems.  We need to apply pulse force (Lee-Tseung Pulls) at the right time. (See reply 1106 and 2621)
1150 describes the Flying Saucer.  This will provide incredible prosperity.  Beware of the potential destructive powers.

ltseung888

#329
September 23, 2007, 08:08:50 PM
I have now edited Campbell1-5A to include the comparison with the 225 HP Pulse Motor.  Edited to add comparison with Wang Generator.

It is attached here as Campbell1-5B.doc.  It should be obvious to the scientifically minded investors on what to invest.

Have fun.  Comments are welcome. Enjoy the Mid-Autumn Festival. Chew on the Moon Cakes while you think! ;)

Lawrence Tseung
Comparison between Pulse Motor and Chas Campbell Flywheel Leads Out clear choice for investors.
Compressible Fluids are Mechanical Energy Carriers. Air is not a fuel but is an energy carrier. (See reply 1097)
Gravitational or Electron Motion Energy can be Lead Out via oscillation, vibration, rotation or flux change systems.  We need to apply pulse force (Lee-Tseung Pulls) at the right time. (See reply 1106 and 2621)
1150 describes the Flying Saucer.  This will provide incredible prosperity.  Beware of the potential destructive powers.
Print
Go Up Pages 1 ... 64 65 66 67 68 ... 1075
User actions