Overunity.com Archives is Temporarily on Read Mode Only!


Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
You also can visit us or register at my main site at:
Overunity Machines Forum



Bob Boyce TPU thread

Started by hartiberlin, July 26, 2007, 12:03:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 42 43 44 45 46
User actions

Bob Boyce

#215
December 22, 2007, 07:03:52 PM
@all

I have been sidetracked trying to get some decent test equipment on my bench. As many know, I have had one heck of a time with getting JUNK delivered to me from those darned surplus equipment sellers on eBay. The suggestions of leaving bad feedback or researching sellers do not really help when it is usually not me doing the bidding or buying. Much of this stuff was being bought for me by a friend that has broadband. I do not stand much of a chance of winning bidding wars when I am on dialup. Bidding is intense because apparently, due to misleading descriptions, the other bidders do not know that they are bidding on potential JUNK. It is really frustrating trying to tell which seller is being truthful in their listings and email correspondence, and which is not. Out of 4 identical Wavetek 859 units, I had enough good parts to make 1 working unit! The main issue with these is corrosion. Corrosion on the chassis, mainboards, plug-in cards, and front panel boards. Dead or partially dead front panel keypads with hidden corrosion in areas not accessable for examination or repair due to the keypads being glued in, hence the corrosion is sandwiched between the front panel plastic and the kepad PCB. Almost every time, units bought that were honestly advertised as DOA for parts only, were actually in better condition than units from the surplus dealers that were advertised as "powers up, but untested". Yea right! The 115VAC powered fan comes on when power switch is turned on, but the electronics were trashed in almost every one of those.

Now for the good news ;-)

The HP 54110D scope arrived, and with the use of an attenuator out of a parts unit HP 54100A scope I bought pretty cheap, it is now working perfectly as far as I can tell. I even managed to get the parts scope working somewhat, so will keep for parts.

The Tektronix HFS 9003 Stimulus System seems to be working nicely, and the SMA to BNC adapters from Hong Kong finally showed up. It may take me a while to learn how to operate the beast though.

I managed to repair one of the HP 8116A 50 Mhz Pulse/Function Generator units with parts from the second supposedly working unit that arrived DOA.

I repaired the HP 8111A 20 Mhz Pulse/Function Generator, as advised in my last post, I listed it on eBay because I don't need it now.

And as I mentioned before, I managed to repair one of the Wavetek 859 50 Mhz Programmable Pulse Generator units. I have one more good chassis and board set, if I can locate another front panel with a good keypad. I may sell off the "boat anchor" junk units on eBay. The ones that were bought from the surplus dealers, if anyone is looking for parts units. I will certainly be honest about the condition if I do decide to list them.

As some of you may know, I have been drawn back into the hydroxy research, due to being nominated for a grant that is being managed by the New Energy Congress. I do not know yet if I was one of the winners, but last I had heard, I was in a tie for second or third place. I guess I will find out if I get a check in the mail ;-)

One of the NEC members bought me a Toyota Prius hybrid with no strings attached. I have been spending a lot of time getting familiar with the onboard systems in preperation for conversion. The current plan (pun intended) is to convert this to an electric vehicle, in order to get it legally retitled and registered as an EV. I need to do this so that this Prius becomes EPA exempt under the ZEV rules.

I intend to build a charging system that can keep the batteries charging for long duration driving. Initially, I will be setting up a hydroxy gas fueled genset, as that is a system that I have had very good success with. I do still intend on pursuing the pure energy type toroidal power system, but that is going to have to go on the back burner for now. I can't risk having direct electrical connection to the vehicular battery bank until I am sure that the complex onboard systems are safe from getting fried.

Bob

EMdevices

#216
May 21, 2008, 01:37:11 PM
Wow,  this is the first I hear of this Aureliano Horta guy and the self running motor.   How awesome.   It is definetely related to the Thrapp motor.  I got to duplicate this technology, seems like a focused effort since we see the diagram with the motor and generator connected to the same shaft,  and we see the control circuit functional block.  Now all we have to do is fill in the blanks.  It's like doing system engineering, here at work.  Topdown design approach.

EM

Bruce_TPU

#217
May 21, 2008, 09:35:08 PM
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

MarkSnoswell

#218
May 21, 2008, 10:28:13 PM
Quote from: EMdevices on May 21, 2008, 01:37:11 PM
Wow,  this is the first I hear of this Aureliano Horta guy and the self running motor.   How awesome.   It is definetely related to the Thrapp motor.  I got to duplicate this technology, seems like a focused effort since we see the diagram with the motor and generator connected to the same shaft,  and we see the control circuit functional block.  Now all we have to do is fill in the blanks.  It's like doing system engineering, here at work.  Topdown design approach.

EM

Aureliano's company is ET3 ... this is the Mexican group I have visited twice. The motor is very old - long since (20 years) left behind. All based on the same principals as TPU, Spherics, Energia
Dr Mark Snoswell.
President of the CGSociety www.cgsociety.org

hartiberlin

#219
May 22, 2008, 01:04:44 AM
Hi Mark,
Why didn?t they publish the motors
some more  ?
Where there still problems ?
Stefan Hartmann, Moderator of the overunity.com forum
Print
Go Up Pages 1 ... 42 43 44 45 46
User actions