Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Nathan Stubblefield Earth battery/Self Generating Induction Coil Replications

Started by Localjoe, October 19, 2007, 02:42:39 PM

Previous topic - Next topic

0 Members and 12 Guests are viewing this topic.

Print
Go Down Pages 1 ... 289 290 291 292 293 ... 809
User actions

Bruce_TPU

#1450
February 17, 2008, 06:42:09 PM
Evening all,

I have every thing tested and prepped for tomorrows evening experiment.  I will be using a 6.3 volt 150 ma bulb, incandescent, in a mini holder.  For the picture below I am using a regular 9 volt battery.  Tomorrow's experiment will use a rechargeable 9 volt that is even now, being recharged.

I have spaced my electrodes apart by 20 feet.  My Carbon rod is to the North, and galvanized spike is to the South.  A nice 1.23 volt reading between the two, at .12 ma's.  I have 8 awg wire going 19 feet from the positive back towards the spike. 

The bulb will be placed in the jar, as seen.  The battery placed in a second jar, to protect them from the elements.  The jar will be slightly lifted up to allow air flow and cooling.

We will see how long it will burn...  ;)

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Pirate88179

#1451
February 17, 2008, 07:06:39 PM
@ Bruce:

My experiment today did not work out.  But, I think I know why.  First, I am sure now that I need to use a rechargeable bat. and will obtain one as soon as I am able to do so.  But, and think about this, I believe we are going to need a diode in the circuit.  My old electrodes were putting out:

1.7 vdc
6mA

The 9 volt is old and was showing 8.2 vdc.  I think what happened was the 8.2 volts lit up the bulb (12 vdc taillight bulb) for a while but why wouldn't the electrons from the 8.2 volts flow into the 1.7 volt earth battery?  I think they would, and did.  What I am saying is that we need a one-way valve (diode) in the circuit so this can't happen.  It seems to make sense to me that the 8.2 volts is going to flow to the 1.7 volt electrodes and not the other way around.  Does this make sense electronically?  I feel like the higher volts/current will flow toward the lesser volt/current.

I will repeat the experiment with a rechargeable bat. in the future but we need a diode, maybe not in the form of an led, but something to stop the flow in the "wrong" direction.

The tail light bulb was illuminated for about ten minutes.  9 volt bat. is "dead" now.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen

Bruce_TPU

#1452
February 17, 2008, 07:19:08 PM
Quote from: Pirate88179 on February 17, 2008, 07:06:39 PM
@ Bruce:

My experiment today did not work out.  But, I think I know why.  First, I am sure now that I need to use a rechargeable bat. and will obtain one as soon as I am able to do so.  But, and think about this, I believe we are going to need a diode in the circuit.  My old electrodes were putting out:

1.7 vdc
6mA

The 9 volt is old and was showing 8.2 vdc.  I think what happened was the 8.2 volts lit up the bulb (12 vdc taillight bulb) for a while but why wouldn't the electrons from the 8.2 volts flow into the 1.7 volt earth battery?  I think they would, and did.  What I am saying is that we need a one-way valve (diode) in the circuit so this can't happen.  It seems to make sense to me that the 8.2 volts is going to flow to the 1.7 volt electrodes and not the other way around.  Does this make sense electronically?  I feel like the higher volts/current will flow toward the lesser volt/current.

I will repeat the experiment with a rechargeable bat. in the future but we need a diode, maybe not in the form of an led, but something to stop the flow in the "wrong" direction.

The tail light bulb was illuminated for about ten minutes.  9 volt bat. is "dead" now.

Bill

@ Bill
That is a great first experiment.  I will first try mine without a diode and can add one on the next go around.  I have a theory, but it is useless to say, I will know tomorrow.

At your youtube video, click the poster's name, who posted that awesome reply.  Then hit message.  It will send him a PM to his youtube account.   ;D  We need more info! 

Good job!

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

crash_uni8

#1453
February 17, 2008, 07:44:59 PM
well i have 5 "cells" in series and am getting 4 volts...but their isn't enough amps still... :-\

if i put the cells in parallel would i get more amps?

Pirate88179

#1454
February 17, 2008, 10:28:55 PM
@ Bruce:

Thanks for the youtube messaging info.  I copied and pasted your list of questions to "Uncleshorty" and hope to get a reply.  I again invited him to join us here.  I checked out some of his saved videos and he appears to have many of the same ones I do.  I think he would like it here.  I will let you know if/when I get a reply.


@crash_uni8:

Yes, I believe that if you wire them in parallel you will increase the mA. (milliamps)  4 volts is a good number for your series arrangement.  If you search back to about the first 5 pages of this topic, you will see where I posted a table on the galvanic materials and their numbers.  Carbon/graphite and magnesium are about the farthest apart on that table so you will get the most volts/mA.  You will also be able to see some other more easily obtained materials and figure out which are best for you to use.  If you can't find it, let me know and I will search for it and post again.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen
Print
Go Up Pages 1 ... 289 290 291 292 293 ... 809
User actions