"Self Running 900 Watt Fuelless Electrical Generator" Is this new?

[b0rg13]

@ Eniac5state,dont you have any thing better to do ?, back in the thread you gave a very strong impression you know how this machine works and left it at that, how about share your greatness with the rest of us and show us your plans etc ?, or do you really not know but just like to say so ?.

[hartiberlin]

I did only get one email from them so far
and they did not further communicate with me.

Hmm, is anybody else with them in contact and has received
more informations so far ?

Also they did not post any other videos yet as was promised..

I would advise to wait and don?t do any donations until they
come forward with more infos.

Many thanks.

Regards, Stefan.

[nightlife]

b0rg13, we were discussing this topic on another thread and you brought something to my attention that I was unaware of and that was the utilization of the meter probes as a way to connect and disconnect a power source.

This how ever does not have much bearing on the device we were talking about as does the sphere it's self as well as it's source of power.

The sphere it's self will bounce vibrations around and it will create a compression of those vibrations creating a heat and the longer they are compressed, the hotter it will get to the point where the vibrations can not get any more vibrant. That would be were the temperature would top off. The you have to add the efficiency of the power source and you end up with a very efficient device that becomes close to 100% efficient. This means it will last for a long time but not forever. If it was 100% efficient, it would run for ever and if the battery would have been disconnected, you would have found the device to cool down and not continue to produce heat.

As for the pulse motor design, I know for a fact that he could not have produced a over unity motor because the power source is not even being utilized properly. He is doing nothing more the Bedini has done with his motors. Again, he has proven a very efficient device but that?s all it is.

One thing we have to remember is that energy is never lost and it only diminishes as it spreads out. These devices as well as others like them are only preserving more of the energy then actually diminishes. They are keeping the energy in a loop with very little escaping making them very efficient.

I talked of how over unity could be produced by modifying these designs but honestly, over unity is impossible to achieve because of power sources being involved. Magnets hold a power source that we have not been able to properly utilize and I think I have figured out why. I have studied every pulse motor I could find and I have yet to see one of them utilize what I hope mine to be able to. If it works, it would look as if it is a over unity motor but in actuality, it wouldn't be because the magnets are a power source like battery's are.

Just as if we were to collect energy from thin air. We could not think of it as a way to produce over unity because of the energy that the air holds. The air would be like a battery just as earth battery's. We can extract energy from the earth but it can not be considered over unity because the earths energy it holds like a battery.

Big money has taken advantage of us by not backing more efficient motors that would cost very little to operate. All electrical motors could be utilized better then they are and made to be close to 100% efficient if they all utilized back Elf?s. They say that DC currents are not pulsed but they have to be and we just must not have the technology to detect the pulses they have. AC is a pulsed DC which we can detect as well as we could utilize the back ELF from the pulses. We are wasting energy with the way we use electricity as well as faucal fuels. Even faucal fuels could be utilized much better then they are and to think we have wasted all that we have just makes me sick and makes me believe that those who sell it, should be imprisoned and or at least not to be allowed to have any part in selling natural resources. I am sure they all know what they are doing as well as they don?t want us to know why they do things the way they do. They are greedy and they want to rule the world and we will all see soon enough how their tactics have been being played out since the days of Hitler.
They already know everything but they will not share it with us because they feel superior and to good to have to be put down to the average level.

I want nothing more then to make things fair and equal for all and that is why I am here. I don't want to debunk anyone?s devices but at the same time, I don?t want people wasting their time on frauds and deceptions that others try and post.

We must stay focused on efficiency more so then over unity because over unity is impossible to achieve.

[EMdevices]

Please do not send any money to these folks, not because the technology does not work, just out of principle.

When you send a DONATION, you can't sue them if what they have is revealed to be fake.  They did not sell you anything, you just donated to a cause.  It's an ingenious way to bring about free energy devices, but it requires a trust that needs to be earned first.   

The videos do not earn enough trust to send money, in my opinion.  That is because they can easily be faked.  A live demonstration perhaps can earn more trust, but then again everybody has their own levels of trust.  Besides, when you donate to a ministry you want to hear progress reports how the money are spend, or perhaps be a board member and participate in the discussions.  Just sending money encourages laziness and fraud.

Update:

I've been away for a few days and I'm still working on the motor.  I still believe 

EM

[esaruoho]

heh, seems like i caught john online, as have traded a few emails with him now.. kinda.
anyway, i mailed him asking to purchase dvds, they said they dont sell dvds anymore, they post them online - and hinted they would post more if someone donated. well, i sent something since i happened to have it, out of my own judgement (and money). they, after a while, received it (i sent in EUR). they replied with "Hello Esa, We have 3 videos posted now, on utube. You are welcome to download them if you know how. Please make a donation, and we will post more. God bless you for your help!". i immediately replied with "i already have seen them and downloaded them. i was hoping the donation i already sent would mean you would post more." they replied with "OK, Yes Thank u! Yes! We will post more. But please be patient it took 4 years to get the volunteers to put up these 3. We can not push volunteers."  to which i immediately replied "i volunteer. i have all the required tools to takea  DVD-R and produce a digital video file of it. i can chop a DVD to any number of slices, and youtube can handle less than 10minute slices so i know how to create those slices out of provided material. please let me help you.".
i reckon that was the right response, i am, after all, a volunteer and would be quite happy to assist them in digitizing their material. in theory, this should result in "yes we will send you a dvd and please let us know when it has been digitized". i hope so. the other avenue is to actually get in touch with james a. robey, and ask if i could purchase the witts DVD from him directly, or a copy of, in order to see if there is more to it than the less than 1 0minute youtube videos - i have a feeling none of the videos are longer than 11 minutes long, on that DVD, very doubtful, like.
and so it continues. 31st of march comes closer, sterling d. allan i suppose is getting ready to interviewing them, and so forth.

ok, i see james a.robey is looking for donations to waterfuelmuseum - i mailed him just now to ask him if he would accept a 50/50  donation/thrapp dvd-loan.
lets see what can happen.