Muller Dynamo

[lanenal]

@nul-points
I don't want to hear from anyone, steorn or others like them.This info is for all people and free too.
I have no intentions to be asociated with people who are just trying to rip us off.
All I want now is someone to replicate it to take this presure from me.I have more to show but at this moment this is HOT.
Running without the converter almost killed this generator melting the coils.... Must have something to keep the output stable.

Folks, I read this post again and think it is kind of important. Can we conclude that Romero has already announced publicly that whatever information released here belongs to the public domain?

THE WORLD WON'T BE THE SAME AGAIN!

Hooray Romero, you are the man!

lanenal

[abdlquadri]

Folks, I read this post again and think it is kind of important. Can we conclude that Romero has already announced publicly that whatever information released here belongs to the public domain?

THE WORLD WON'T BE THE SAME AGAIN!

Hooray Romero, you are the man!

lanenal

Pls the co-ordinator of this project should put a Linux-style license on this project(GPL I think version 2). In brief; no one can patent it; any modifications must be published; you can charge for it. The Law only recognizes license not statements.

[powercat]

WOW

Energy stored in a capacitor converted to light and motion! Amazing!! 

You forgot to mention,  energy being generated back into the capacitor 

[nul-points]

[...]
I think this [DadHav's video]  particulary is important to see by most of the guys here
[...]
the motor is eating up 0.00001 Volts [...] per second from 2 volts. that means this device might run for 2 days aprox just on the CAP
[...]
in case you do manage to make a replication of RomeroUK device, do put a lightbulb or something that you know it should deplete the CAP in a measurable amount of time

@Charlie_V : nice analysis
[...]
When coil 1 is generating power, coil 2 is supposed to draw power from coil 1, so there should be no power in the wires at all, but he limited the back EMF so coil 1 is not feeding coil 2.
[...]

Tudi

a couple of  points for you to consider:

1) in his 'device self-running' video, Romero demonstrated the device powering an additional load - and also responding with a speed drop and then increase when he changed the drive level to the motor using the DC converter to around 4V and then back to 12V

towards the end of the video, Romero powers down the device by disconnecting the circuit at the o/p from the FWBRs

there is an immediate change of pitch as the rotor begins its run down

the rotor takes approximately 100s to run down
(video ends, a few seconds probably, before absolute stop)

what's the significance of where Romero disconnects the circuit?

this:  the 47000uF and DC converter are still connected to the motor drive whilst the rotor is running down - and yet they're not capable of extending the rotor run down any longer than 100 seconds


2) when running with 12V i/p the motor was measured to consume 12 Watts and generated 15V to the buffer capacitor

it needs 12W continuously, every second, every minute, every hour, etc just to keep running and generating that 15V into the buffer cap

at 15V the 47000uF buffer cap stores 5.3 Watt-seconds - ie. the TOTAL ENERGY in the cap is less than enough to maintain the motor at the same drive for 0.5 second

if the motor self-runs at 12V i/p in the video for let's say at least 10 mins - that would require at least 12 * 10 * 60 = 7200 Watt-seconds

at the start of those 10 minutes (600s), when Romero disconnects the battery, there is only 5.3 Watt-seconds in the cap

but we've already seen in point (1) that with only 5.3 Watt-seconds in the cap the rotor runs downs and stops in 1min 40sec (100s)

where did the other 7194.7 Watt-seconds come from to keep it running for another 9 minutes and 59.5 seconds?

so whilst it may or may not be interesting to watch a video where a motor could run for two days on a cap, what "particularly is important", for "most of the guys here", is to look carefully at the actual available evidence for this device and draw what conclusions we can from that


in your reply to Charlie_V you refer to coils 1 & 2

please clarify the coils in your reference -
  ie. are coils 1 & 2 the two halves of a coil pair at one stator location?  OR/

      are coils 1 & 2 the full pairs at stator positions 1 & 2?


i'd like to understand what you're saying about:
  "coil 2 is supposed to draw power from coil 1, so there should be no power in the wires at all, but he limited the back EMF so coil 1 is not feeding coil 2."


thanks
np


http://docsfreelunch.blogspot.com

[lanenal]

Don't worry I am not running away.I don't care if i am on different sites or if I am not. I prefer not to be.This is not my invention, I have only replicated the work from this great man, Bill Muller.
This is smal comparing with many other discoveries that are already available but sometimes even small is good enough to keep us going.
Now I am waiting other people to replicate then I will be more happy. I have a friend here on this forum that I talked with in private sometimes and this friend already thinks that yesterday video is a fake.I am waiting to see what is going to say today.
I might need to hang the generator with a piece of wire and have it running suspended...
People replicating this should double all my details, bigger coils, magnets and most important a heavy rotor with even number of magnets on it and uneven number of coils.
Make sure that spacing betwen the coils or betwen the magnets on the rotor is equally spaced.
The distance betwen the coils and the rotor  must be adjusted depending on the magnets used, core... Too close is not neccesary good.

Read this again (emphasis mine), folks!

This is not my invention, I have only replicated the work from this great man, Bill Muller.

What a humble spirit! What a noble man!

lanenal