Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Thane Heins Perepiteia.

Started by RunningBare, February 04, 2008, 09:02:26 AM

Previous topic - Next topic

0 Members and 13 Guests are viewing this topic.

Print
Go Down Pages 1 ... 51 52 53 54 55 ... 959
User actions

Heinstein

#260
February 17, 2008, 08:06:03 PM
Dear All,

Don?t forget that this transformer IS INTENDED to be a high voltage low current unit.  P = V^2/R with low losses due to heat. So we will definitely try the higher frequency approach ? Luc?s said he?s buying the champagne if we succeed.

Thane

Bruce_TPU

#261
February 17, 2008, 08:53:00 PM
Hello all,

I have been following, silently watching.

Hmmm....Starting to sound like a Toroidal Power Unit.

@aether22
Brilliant analysis.  I believe this is also a part of the mystery that is Steven Mark, and his discovery.

@ Thane
Welcome to the Forum, and thank you for your commitment.

A quick question:
Have you ever attempted the same idea as your bi-transformer, but instead of two secondaries, having four?  One at each quadrant of the toroid?  What would the result of that be?

When you pulse your primary, according to aether22's suggestion, I would suggest an attempt at 35.705 Khz or 245 Khz.  A long story why...but please keep it in mind.  I would also suggest using extremely fast pulses.   Extremely fast.  ;)

Happy experimenting and I look forward to hopeful results.

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

gotoluc

#262
February 17, 2008, 08:56:33 PM
Quote from: Heinstein on February 17, 2008, 08:06:03 PM
Dear All,

Don?t forget that this transformer IS INTENDED to be a high voltage low current unit.  P = V^2/R with low losses due to heat. So we will definitely try the higher frequency approach ? Luc?s said he?s buying the champagne if we succeed.

Thane

Hi all,

first I would like to thank Thane for joining the forum. It's going to really help to speed things up ;)

I would like to ask all of you for your help with ideals and explanation to make a new Primary for testing Toroid 3 once again but this time with higher frequencies than 60Hz. I will be the one making a new one and need all your help and expertize.

As you have seen in the pictures, the primary that was quickly made for testing could possibly be improved. The core of the primary is  2 pcs. of 1/8" (3mm)  Thick x  4 1/4" (108mm) Length x 1" (25mm) Wide solid steel strips of angle steel you buy in a hadware store. The magnet wire looks to be 16 gauge.

Thane gave me some thin steel transformer laminations which I could cut and group together of core. What do you think?

How many turns of wire, how Thick a core and how Wide?  The Length has to stay as above to fit inside the Toroid.

Please you input a.s.a.p.

Thanks

Luc

Mr.Entropy

#263
February 17, 2008, 09:03:44 PM
Can someone (whoever has it) post the DC resistance and turn count of Thane's primary?

Thanks,

Mr. Entropy

hartiberlin

#264
February 17, 2008, 09:08:38 PM
Hi Luc,
try maybe also with a AM ferrite rod and
wind there maybe 2x100 windings on there both winding in paralel
( Bifilar) and use the Tesla style connection, so the flux in this primary
does not cancel out, but add, but has much more capacitance.
Also then try to use much higher frequencies like in the Khz range and
try pulse the primary coil with a MOSFET circuit.
OR you can try your other circuit,
http://www.overunity.com/index.php/topic,4124.0.html
where you had the sparks at the magnets
from this afternoon and do this pulsing with the primary and
then use both secondaries in parallel or series to feed the bridge
rectifier and charge cap.
Should also work quite well with these spark pulses..
Good luck !

Regards, Stefan.
Stefan Hartmann, Moderator of the overunity.com forum
Print
Go Up Pages 1 ... 51 52 53 54 55 ... 959
User actions