Thane Heins Perepiteia.

[i_ron]

I WOULD SUGGEST THAT YOU FOCUS MORE SO ON THE INDUCTANCE OF THE COILS RATHER THAN THE POWER RATING (SEE BELOW)... YOU ARE LOOKING TO CREATE A SELF RESONANCE EFFECT IN THE HIGH VOLTAGE COIL. 

CHEERS
Thane

Fascinating, direct question... were you tuning the HV coil with a capacitor at any time?

How broad is the tuning window?  Is that why you recommended the rotor with many magnets?

Does the HV coil in resonance then re radiate a flux field that the HC coil sees?

I realize you under non disclose so a highly fictitious answer will be taken as confirmation...

Take Care,

Ron, (in the rain) still, its better than snow, lol

[CRANKYpants]

quote]Fascinating, direct question... were you tuning the HV coil with a capacitor at any time?[/quote]

NO THE HV COIL HAS ITS OWN SELF CAPACITANCE AND WHEN THE ROTOR SPEED REACHES THE RIGHT SPOT - YOU GET RESONANCE AND ACCELERATION UNTIL THE SYSTEM ACCELERATES OUT OF THE RESONANCE REGION.

How broad is the tuning window?  Is that why you recommended the rotor with many magnets?

THE WINDOW IS A FACTOR OF THE COILS INCUCTANCE AND SELF CAPACITANCE. MORE MAGNETS SIMPLY GET YOU UP TO THE RESONANT FREQUENCY (CRITICAL SPEED THRESHOLD) FASTER.

Does the HV coil in resonance then re radiate a flux field that the HC coil sees?

WE NOW HAVE TWO COILS - THE PARALLEL BI-COIL (LUC'S MICROWAVE TRANSFORMERS)
AND THE CONCENTRIC BI-COIL (MY DESIGN)... TO ANSWER YOUR QUESTION THE HC COIL IN THE PARALLEL BI-COIL "SEES" A SLIGHT MOMENTARY DECREASE IN FLUX DUE TO THE HV COIL'S FLUX AND THE CONCENTRIC BI-COIL "SEES" A SLIGH INCREASE SO YES - THE HV COIL DOES RE-RADIATE A FLUX FIELD THAT THE HC COIL CAN USE.

I realize you under non disclose so a highly fictitious answer will be taken as confirmation...

NO NON-DICLOSURE HERE - AND THANKS TO QUEEN'S UNIVERSITY Ph.D. STUDENT STEVE WHITE (DERRICKA'S INTRODUCTION WHO CAME FOR A DEMO ON SATURDAY) WHO HELPED PUT THE FINAL THEORY PUZZLE PIECES IN PLACE.

Take Care,
Ron, (in the rain) still, its better than snow, lol

TAKING CARE...
T

P.S. I'LL TAKE SNOW!!! http://www.youtube.com/watch?v=66CldXqESLA

[i_ron]

quote]Fascinating, direct question... were you tuning the HV coil with a capacitor at any time?

snip

WE NOW HAVE TWO COILS - THE PARALLEL BI-COIL (LUC'S MICROWAVE TRANSFORMERS)
AND THE CONCENTRIC BI-COIL (MY DESIGN)... TO ANSWER YOUR QUESTION THE HC COIL IN THE PARALLEL BI-COIL "SEES" A SLIGHT MOMENTARY DECREASE IN FLUX DUE TO THE HV COIL'S FLUX AND THE CONCENTRIC BI-COIL "SEES" A SLIGH INCREASE SO YES - THE HV COIL DOES RE-RADIATE A FLUX FIELD THAT THE HC COIL CAN USE.

snip

NO NON-DICLOSURE HERE - AND THANKS TO QUEEN'S UNIVERSITY Ph.D. STUDENT STEVE WHITE (DERRICKA'S INTRODUCTION WHO CAME FOR A DEMO ON SATURDAY) WHO HELPED PUT THE FINAL THEORY PUZZLE PIECES IN PLACE.


TAKING CARE...
T

That is great news son, I am proud of you!

So I would root for the concentric bi coil, this would seem to have the most potential (no pun)

Ron

[i_ron]

I ordered four from Ebay since I do not have time to drive around town checking out Microwaves on the curb. The local Goodwill store does not accept Microwaves anymore.. At least from Ebay you get a picture of what you are getting. I ordered ones that looked like the ones i_iron was showing without having a clue about the power ratings. Once I get them and grind off the weld what is the next step ?
Thanks for the pictures i_iron. Keep them coming. I am more of a picture guy. I also like Thanes beer fridge picture.

The microwave transformer is more for the historical continuity aspect, to show what has gone before.
It is merely one way to demonstrate the "Thane Theory" For the way forward I would go back and look
for the Bi coil that T showed us. I looked for it but my attention span got used up,lol

But as you can see in the following photo, it is best to carefully remove the coils as then one may
put them back on in the reverse configuration with the secondary in front and/or different config's.

The secondary, as I mentioned, is the hard one to get off without damage. Why I suggest its
removal is because one can use the wire to wind BI coil, understood? it is the right gauge and
resistance for the HV coil in whatever configuration that you wish to pursue.

Thanks for the appreciation of the pics, small potatoes to what T has posted... nevertheless....

Ron

PS: shown on a dreaded piece of aluminum, T would use some great ugly chunk of i_ron, note also
the coil on the left has a wooden wedge to lock it in place.

Note also the CANADIAN signature Robertson head screw holding the two cores together.. without
this I doubt that it would work....LOL

[Kator01]

Hello CRANKYpants,

I understand from your video-presentations that the HV-Coil is shorted for the accellerating effect. How can it be that a shorted coil has selfresonance-behaviour ?

Kator