Stubblefield coils (bifilar) and speculations

[1tesla01]

40 ft diameter x3.14 =125.6 x 42 turns=...5275.2...... feet now do the wave length equasion.Regards Andy

[1tesla01]

Who was it talked about stacking pancake bifilars?? I think that is a great idea!!Andy  ;Dmaking pancakes with strawberrys

[resonanceman]

I have taken  a few readings  with my 2 small  pancake  coils.

WIth   with the first small   pancake  coil I made  on top of my last  pancake  coil  I get.
reading  between  5 & 6 on  the older ( and lower power  ) coil

Parallel    1.890  mA        .420 mV  DC

Series    1.420 mA       .270  mV DC

Just  sitting on top  of the other  coil .........unconnected

.440  mA     .470 mV   


All these readings  were taken  after sitting a few minutes 



All  the  readings I  have checked with the  stronger  coil on top  come up  slightly lower \
Flipping the  new coil to match the  wind direction  of the other coil   comes up  slightly lower too . 


gary

The  first reading   of the  starting surge  when connecting  in  parallel  is  2.6 mA 

[resonanceman]

wow, gary, that is a lot of resistance. and it still gives that much volts n amps? coils are strange things.

Jeanna

That  resistance  is not  for the windings  themselves ........that is between the windings


my other  coils  all show  "over limit "   for  resistance 


gary

[mthompson]

Tesla Coil Construction:
Tesla gave explicit instructions on how to construct a simple Tesla Coil system, which were published in the Electrical Engineer Vol. xxvi Nov. 17, 1898  No. 550, titled 'High Frequency Oscillators for Electro-Therapeutic and other Purposes'. This is available for free on-line at the Twenty First Century Books' site (http://www.tfcbooks.com/mainpage/site_map.htm).

Willy's Antenna Charger:
No need to use the Wayback site, as this page is still available directly from angelfire.com at:
http://www.angelfire.com/ak5/energy21/capacitorcharger.htm
This paper is not the property of angelfire.com, and is posted all over the internet. It is not clear if anyone knows or is in touch with the purported author: CU 73 AE4YW Mitch. It is a very interesting paper and seems to be one of the original internet postings regarding antenna based atmospheric static electricity charging systems.

Overunity forums' affiliate site, Pure Energy Systems (PES Network, Inc.), has a couple open source projects regarding this type of system at: http://peswiki.com/index.php/OS:Radiant_Energy_Antenna_System

There doesn't seem to be any verifiable experiments that have reported any significant results; however, all projects and diagrams, including John Bedini's, seem to contain obvious flaws.

Tesla's Radiant Energy Device:
One thing to note about this is his emphasis on using plates with as large a surface area as practical. Another is that this system is not the same as Willy's. While Tesla used, I believe, the figure of a gain of 50 volts per foot of elevation, there seems to be a practical minimum height differential, below which no significant voltage is manifest.

Resonance:
There is a very interesting site regarding earth and planetary resonance at: http://home.gwi.net/~erichard/
Make sure to read the FASTER THAN A SPEEDING LIGHT page: http://home.gwi.net/~erichard/fastlit.htm

Squire Tree Antenna Patent:
Perhaps you are already familiar with this as Gen. Squire and NS collaborated together; while this patent wasn't directly concerned with developing a type of power source, it is related and provides some novel insight into the subject of earth/atmospheric electrical energy.
www.rexresearch.com/squier/squier.htm