URGENT! WATER AS FUEL DISCOVERY FOR EVERYONE TO SHARE

[Dread]

Scratch the info request. Going to copy X-box's design (for a change )

Hey X-box, it looks like 3 layers (13, 1st layer, 12, 2nd layer, 13, 3rd layer) on your secondary, right?
What did you use as the core? looks like PVC. 

D

[xbox hacker]

Scratch the info request. Going to copy X-box's design (for a change )

Hey X-box, it looks like 3 layers (13, 1st layer, 12, 2nd layer, 13, 3rd layer) on your secondary, right?
What did you use as the core? looks like PVC. 

D

The coil i use is from a arcade monitor....its for the Horizontal width adjustment. The plastic thing is threaded in the center and the ferrite is threaded too, that how you adjust it....by moving it up and down. My rod is 1" long by about 3/8" diameter. Their is only a primary and a secondary. In the image the secondary is on the bottom and the primary is wound over the secondary. The secondary is about 28-30 turns and the primary is about 12 turns...i say about because i have made MANY coils and they all worked just fine....not one number of turns was better then another. I have never gone over 30 on the secondary....lol

You can goto radioshack and buy a ferrite rod inductor, take off the windings that are on it, and you have a core to start with! The secondary needs to be coated wire.....NOT magnet wire. I bought some 1000V wire on ebay and i have not gotten around to testing it....but i hope to soon! The primary can be magnet wire. The best wire i have found to use...that was FREE....is the windings form a microwave transformer. Most of my coils were made of it.

The capacitor is the most important part!! I bought some 6kV 500pF caps on ebay, and they seem to work well.

Here is how to start:
-Connect your HV/primary side to the coil.
-Connect a spark plug to the secondary side of the coil...one leg goes to the body of the plug and the other leg goes to the top of the plug... DO NOT WORRY ABOUT DC VOLTAGE FOR NOW. We just want to see if we can get a spark on the secondary plug!!!! If you get a good spark...with no missing, then move on to adding the DC to the secondary.

REMEMBER...

[gotoluc]

Scratch the info request. Going to copy X-box's design (for a change )

Hey X-box, it looks like 3 layers (13, 1st layer, 12, 2nd layer, 13, 3rd layer) on your secondary, right?
What did you use as the core? looks like PVC. 

D

The coil i use is from a arcade monitor....its for the Horizontal width adjustment. The plastic thing is threaded in the center and the ferrite is threaded too, that how you adjust it....by moving it up and down. My rod is 1" long by about 3/8" diameter. Their is only a primary and a secondary. In the image the secondary is on the bottom and the primary is wound over the secondary. The secondary is about 28-30 turns and the primary is about 12 turns...i say about because i have made MANY coils and they all worked just fine....not one number of turns was better then another. I have never gone over 30 on the secondary....lol

You can goto radioshack and buy a ferrite rod inductor, take off the windings that are on it, and you have a core to start with! The secondary needs to be coated wire.....NOT magnet wire. I bought some 1000V wire on ebay and i have not gotten around to testing it....but i hope to soon! The primary can be magnet wire. The best wire i have found to use...that was FREE....is the windings form a microwave transformer. Most of my coils were made of it.

The capacitor is the most important part!! I bought some 6kV 500pF caps on ebay, and they seem to work well.

Here is how to start:
-Connect your HV/primary side to the coil.
-Connect a spark plug to the secondary side of the coil...one leg goes to the body of the plug and the other leg goes to the top of the plug... DO NOT WORRY ABOUT DC VOLTAGE FOR NOW. We just want to see if we can get a spark on the secondary plug!!!! If you get a good spark...with no missing, then move on to adding the DC to the secondary.

Hi Dread and xbox hacker,

please don't get me wrong guys but I think these questions and information should be kept in the same topic (were capacitor70 has posted his circuit) in order not to confuse those who are working on the circuit of this topic. Also, if these questions were in the topic that the information is in, it would help those who want to replicate capacitor70's circuit if they could read them there.

What do you think of this idea? can we agree to do this if more questions or information are needed?

Hey xbox hacker, you haven't answered my question above watsup man!
Added: I think I see now what I missed, at the end capacitor70 said (no limit less power )

Thanks

Luc

[xbox hacker]

What do you think of this idea? can we agree to do this if more questions or information are needed?
Great Idea!!


Hey xbox hacker, you haven't answered my question above Roll Eyes watsup man!
I am sorry....i did not see that one.... 
Soooo many forums...so little time....

He is working on a "Tesla Switch" like thing that will have the power to power the DC needed for the plasma spark.

No limitless power, yet 

[Groundloop]

Group,

There was a current flowing through the high side of the ignition coil from the low voltage driver circuit through the diode chain.
(In my CDI circuits posted earlier in this thread.)

This current leakage was not wanted so I have designed a new circuit proposal that have no leakage at all.
The new circuit uses high voltage high current diodes to insulate the ignition coil high voltage.

I hope you will find this circuit useful.

Groundloop.