Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Joule Thief

Started by Pirate88179, November 20, 2008, 03:07:58 AM

Previous topic - Next topic

0 Members and 90 Guests are viewing this topic.

Print
Go Down Pages 1 ... 782 783 784 785 786 ... 3388
User actions

Pirate88179

#3915
March 16, 2009, 12:23:58 AM
@ MK1 and Wilby:

Thanks guys for your comments on my SG.  Everyone here has helped me in one way or another on this, and many other experiments I have done.  I really appreciate the sharing of knowledge we seem to have here on this topic.

I am going to take Al's advice and get 2 small lead acid batteries and hook them up.  Once I get the feel for this cool device, I will begin playing with modifications that will hopefully improve it.  If not, I have about 50 3055 transistors so I can try different things without much worry.

The screw mechanism seems to be a bit overkill but I have seen an improvement in output by "fine tuning" it.  The range is a bit more broad than I first thought but, there is a range of distance that helps.  My guess without measuring is that it is about .100".  I can tune much closer than that but I did not know this at the time I built it.  I just wanted all of the adjustments I could have in case I didn't wind the coil correctly or made some other error in construction.

Once again, thank you to all of you for helping me on this project, as well as all of the others I have been attempting.  you are a great group of fellows. (and Gal.)

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen

WilbyInebriated

#3916
March 16, 2009, 12:35:20 AM
bill, i saw you ask about neos in your youtube sg comments. try it out, stick another set of neos on top of the ones you have. i wouldn't glue or epoxy them just yet, a wrap of electrical tape around the circumference and their own magnetism should be fine for some quick tests. i got much better output by adding some neos and opening the gap a bit more vrs one set of neos and a much smaller gap. it should accelerate to top rpm faster with more neos also. glad you got it built!!
There is no news. There's the truth of the signal. What I see. And, there's the puppet theater...
the Parliament jesters foist on the somnambulant public.  - Mr. Universe

innovation_station

#3917
March 16, 2009, 12:40:41 AM
@mk1

i have something commeing in the mail for you soon  8)

my previous investor has contacted me agin an OLD INVESTOR whom i have knowen a few years now....  ;)

12 cores are being purchised and 6 are going to me and 6 to you mk1

from us they will sent out to be confirmed and idependently tested

to work with in the fcc guide lines ...

so where does this go ....   

ill tell ya

OUR COLLECTOR RINGS ARE  ALREADY BEING SOLD IN LARGE AMOUNTS ......     AND THEY AINT BUYING THEM FROM US ......  HA!!!!

I DO LOVE CHANGE ....    ;D

TIME FOR A BETTER ONE     EH!?!?!?!?!?!?!                                                       LOL!!!


!ST!











To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

THE !STORE IS UP AND RUNNING ...  WE ARE TAKEING ORDERS ..  NOW ..   ISTEAM.CA   AND WE CAN AND WILL BUILD CUSTOM COILS ...  OF   LARGER  OUTPUT ...

CAN YOU SAY GOOD BYE TO YESTERDAY?!?!?!?!

Pirate88179

#3918
March 16, 2009, 12:48:18 AM
Quote from: WilbyInebriated on March 16, 2009, 12:35:20 AM
bill, i saw you ask about neos in your youtube sg comments. try it out, stick another set of neos on top of the ones you have. i wouldn't glue or epoxy them just yet, a wrap of electrical tape around the circumference and their own magnetism should be fine for some quick tests. i got much better output by adding some neos and opening the gap a bit more vrs one set of neos and a much smaller gap. it should accelerate to top rpm faster with more neos also. glad you got it built!!

@ Wilby:

Thanks!  What I was wondering about was adding 4 more neos along the diameter of the rotor.  In other words, I have seen these motors built with 2 magnets.  They did not seem to turn very fast.  I have used 4 and it turns well.  If I used 8 equally spaced along the circumference, would this increase the rpm?  Or, better yet, would this increase the output in any way?  Or, should I stack the neos as you have suggested?  So many questions about my new device here.  I am really having fun with this thing.  Thanks for your input, I really appreciate it.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen
Print
Go Up Pages 1 ... 782 783 784 785 786 ... 3388
User actions