100% energy saver in the market

[hansvonlieven]

G'day Fritz,

The system was originally not really designed to cheat power companies of funds, though it did that. The primary purpose was to dodge power rationing and avoid stiff fines for overuse. Remember this stuff surfaced in 1945.

Hans von Lieven

[Pirate88179]

@ Hans:

Great historical info....thanks.

Bill

[pese]

Creativity,
Group,

I made some power measurements of things on around the house using my killawatt meter:
were supposed to be 120v @ 60hz

Blower on forced air, outside Wood burning stove/furnace.
123V, 2.35A, 153W, 290VA, 0.53PF
This Dual monitor computer, UPS, router, wireless radio and another computer CPU unit.
122.6V, 2.82A, 238W, 325VA, 0.69PF
Microwave Oven 1,1kw on hi cup of water inside.
119.8V, 11.77A, 1255W, 1400VA, 0.89PF
Christmas tree lights. incandescent lamps.
120V, 2.02A, 244W, 245VA, PF 1.0
Humidifier (portable)
122.4V, 0.16A, 11W, 19VA, 0.58PF
Large LCD TV, Satellite receiver dvr, DVD/VHS unit, alarm clock, Barn bug radio, all on UPS.
120.7, 2.17A, 243W, 263VA, 0.92PF
Phillips 13W CFL.
122.6V, 0.21A, 16W, 26VA, 0.62PF
CRT TV, volume set to max.
122.2V, 0.81A, 71W, 94VA, 0.73PF
Upright Freezer.
123.2V, 1.17A, 118W, 145VA, 0.81PF
Box window fan.
122.4V, 0.76A, 90W, 93VA, 0.95PF
All Tube oscilloscope.
122.2V, 2.62A, 300W, 320VA, 0.93PF

Most of the big things are wired in directly with no plug.
My wife wasn't doing laundry so i cant get data from those two machines.

DrSpark

That is exactly what i have written to you,
now , take fluorrescent tube lamp-  ) not electronic.
the old-one ,driven with an choke (copper at iron core).
possible the 230volt tubes (europe) make more
lesses than yours (US) on 120volts line.
BECAUSE the difference or the rearly working voltage
on an such lamp ist approx.  only 95 volt.
the rest to the line voltage make high differences to the counter.
!

See that rearly ohmic load have phase differences 1 = zero.
Such loads  connected over  the power saver, aswell loads
with different PV will only dampimg the power daver.
Each inductive load must be separatly connected to his
own (opimized) saver to become the optimum avaiable PV=1

Now see that that lamps make (if uncompensated -without cap-)
make you wonder

Pese

[sushimoto]

.... interesting side-effect of all of this FE-research.

Is it illegal to recycle?
how many of the PAYED electricity are you giving back to the grid FOR FREE?

the best ideas are flashing while i am in my bathroom. (because nobody disturbs me *gg*)
My water-bill is just about m3. so the pressure is free or already payed?
why not putting a tesla turbine or such into the water-system do drive a generator while any tap is used?

I know, my first post should look different,
but unfortunately reality is biting while researching on FE.

best,
sushimoto

[hartiberlin]

Boondee.net has a new resonance power supply:

http://www.boondeeworkshop.com/resonant.html


But to compensate all the power factors under 1
to 1 as some devices do is a very good thing also for the power
companies and should be done to save money for your electic bills !

I was shocked to hear that CFL bulbs only have a power factor
of less than 0.6 and thus don´t save money at all but just
waste lots of energy this way !

So it will be a very good way to sell power saving corrector boxes
that can be easily connected to your grid lines and will
save you real money.
As these boxes mostly contain just a few big caps
and some switching circuits, these should not be too expensive
and maybe we can develop something over here
in open source and make kits available.

I am planning to program into this domain an auction plugin or
shoping cart , so users can sell their hardware over here.

Regards, Stefan.