Overunity.com Archives is Temporarily on Read Mode Only!


Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
You also can visit us or register at my main site at:
Overunity Machines Forum



ENERGY AMPLIFICATION

Started by Tito L. Oracion, February 06, 2009, 01:45:08 AM

Previous topic - Next topic

0 Members and 14 Guests are viewing this topic.

Jeg

Quote from: bringdownthezog on December 08, 2018, 02:34:11 AM
Tito and Leonelogb. Are you using high side switching ?

For sure a high side switch will fit better to your needs on this subject, but again it depends on what you are trying to accomblish.

My personal opinion on Tom Bearden.
His transforrmer as a stand alone unit, will never give something more than a simple conventional transformer. As F6FLT said it needs energy to do parametric changes and this is really NOT "free" to do it. I am not saying that Bearden is a fraud. He just protects his work as any logical researcher who gave his arm and leg to discover something of a value. Don't seek his secret on his drawings or else you are doomed to repeat again and again the same and wrong approach to the subject. The same applies to all of the researchers the last 100 years who applied a patent for a "free" energy device. Their secret is never showed on papers or else everyone now would have a maschine of this kind. Experimenting with your own ideas and gaining personal experience is the only way out..

Regards

F6FLT

Quote from: ayeaye on December 07, 2018, 09:24:42 PM
F6FLT saying that he built something, usually means that he tried to simulate something...
Please stop your defaming lies.
We are here to discuss about technology, not about people.
« The elite minds discuss ideas, average minds discuss events, the mediocre minds discuss people. »
Jules Romains

F6FLT

Quote from: bringdownthezog on December 07, 2018, 09:15:12 AM
You tell us why its not working. We might as well enjoy your imaginary experiments. And where did you source this core? Did you buy it from a store?
I said it hundred of times. You can't modulate a flux. A flux should be understood as looped field lines and the "modulation", when you increase/decrease the source field, as an increase/decrease of the number of field lines.
A field from a "switching" coil simply add to the field supposed to be switched, they don't multiply. This is always true, you just have to take into account the instantaneous values of the fields but also of the permeability if it's not constant. It means that the field of the switching coil and the output coil is common, so the coils act on one each other as in any transformer (but here with a low coefficient of mutual induction) and that the change of permeability needs energy. A parametric change consumes energy when it allows for extra-energy in the system, the additional energy being that one that we put for the parametric change (same effect when we try to change a capacity storing a charge, to increase its energy according to W=1/2 * Q²/C).

My experiments are not imaginary, see the photo of a part of my modest laboratory today, yes it is a mess, I don't have time to clean up.  ;D
An experiment is done to test an idea, and the results of the experiment must help to clarify the idea, or to validate it, or to reject it. If you have no idea, or if you don't have the competence to understand both the physics underlying your idea and the results of your observations, you're not doing experiments but anything to please yourself, it's just looking at pretty slopes on an oscilloscope while jumping like a young goatee and screaming, I'll have it, I have it, I got it, the free energy is there!!!  ::)


partzman

Quote from: F6FLT on December 08, 2018, 06:04:03 AM

A parametric change consumes energy when it allows for extra-energy in the system, the additional energy being that one that we put for the parametric change (same effect when we try to change a capacity storing a charge, to increase its energy according to W=1/2 * Q²/C).


I will agree here as all my tests of circuits using parametric inductance and capacitance have been conservative up to this point in time.  However, Gorchilin claims gains are possible with parametric inductance using partial cycles.  See-

http://gorchilin.com/articles/energy/RLC_5?lang=en

Unfortunately my calculus skills are lacking so I'm unable to determine if his theory is correct and I haven't attempted any type of build.

I'm curious to know if you have ever considered the TPU by Steven Marks?

Pm

bringdownthezog

Quote from: F6FLT on December 08, 2018, 06:04:03 AM
I said it hundred of times. You can't modulate a flux. A flux should be understood as looped field lines and the "modulation", when you increase/decrease the source field, as an increase/decrease of the number of field lines.
A field from a "switching" coil simply add to the field supposed to be switched, they don't multiply. This is always true, you just have to take into account the instantaneous values of the fields but also of the permeability if it's not constant. It means that the field of the switching coil and the output coil is common, so the coils act on one each other as in any transformer (but here with a low coefficient of mutual induction) and that the change of permeability needs energy. A parametric change consumes energy when it allows for extra-energy in the system, the additional energy being that one that we put for the parametric change (same effect when we try to change a capacity storing a charge, to increase its energy according to W=1/2 * Q²/C).

My experiments are not imaginary, see the photo of a part of my modest laboratory today, yes it is a mess, I don't have time to clean up.  ;D
An experiment is done to test an idea, and the results of the experiment must help to clarify the idea, or to validate it, or to reject it. If you have no idea, or if you don't have the competence to understand both the physics underlying your idea and the results of your observations, you're not doing experiments but anything to please yourself, it's just looking at pretty slopes on an oscilloscope while jumping like a young goatee and screaming, I'll have it, I have it, I got it, the free energy is there!!!  ::)


Not MEG. This is just piss pond.  ;D