My Current Build

[BAHammer]

Alexioco

I agree with you on this, it is a waste of time. But I can also see that this BAHammer also once known as P-Motion obviously is causing problems for AB Hammer. I looked up this #30 post on G-Force. http://www.overunity.com/index.php?topic=6431.30 It belongs to AB Hammer and nothing said by this BAHammer is what he says. I also see him constantly accusing AB Hammer of lying and stealing. There is no evidence of that either. I can see this BAHammer/P-Motion say AB said this or AB said that and is constantly asking AB about stuff as well. Then I see AB answering the question or disputing what BAHammer /P-Motion said, and the back and for begins again, and AB has little choice but to accept BAHammer's/P-Motion's lies or fight him.

I was following this because it was almost like a soap opera, and sometimes funny. But I can see now that for some sick reason BAHammer/P-Motion has it in for AB Hammer, and will never let him rest. No wonder BAHammer/P-Motion was banned from other forums.

  What do you call this ? And check the date on it. Tell me, what did I do wrong ? Wished to discuss something ?
It's dated May 2008. Tell me what I did. I mean, besides trying to discuss an idea.
I think it is in poor taste to say that for some sick reason I have it in for alan.
In the G-Force thread, if you read it, he was saying Ralph has it all over me and he is called Copernicus in Mississippi for his math. If so, why doesn't he discuss math ?
He did say his Keel Effect proves a lever can not work on a wheel. Am I required to suport his ideas when they run counter to what I believe ? And what does Ralph have to do with a  discussion about inertia ? That is what the thread was about.
>>    
Re: Perpetual Rolling Wheel ?
« Reply #3 on: May 11, 2008, 10:32:42 PM »
   Reply with quoteQuote
P-Motion

I work with my hands. I test with my hands. I observe the test and make notes. I design wheels and build them, and if they don't work I find out why, and take more notes. I don't spend my time with only math equations, for they will not tell any one if a wheel will work or not, they only help with the balances and imbalances.

This is how I work, hands on. Not arguing equations on the forums, the whys and why nots. I go out and build and find out.

You could use some good hands on practice and start seeing for yourself. Instead of trying to talk others into building what you come up with. I have never found anything that you have shown creditable for you are lacking the hands on experience, and it shows.
   Report to moderator   Logged
With out a dream, there can be no vision.

Alan

[BAHammer]

I just presented some evidence with the rehashing of Da Vinci's wheel; not even giving a dead man credit.




Bessler007
Cmdr, MIB

Let's see, the evidence is in Alexioco's private forum. And at anytime, Alexioco can delete the thread since he is host and moderator.
Alex does know Alan posted a thread on a self rolling wheel. And it is after I posted a thread detailing a self rolling wheel that Alan decided to harass me every timer I post about something. Check when I was doing an actual build. He said to, yet still harassed me. Why ?
I had said nothing about him at that time.

[Alexioco]

Let's see, the evidence is in Alexioco's private forum. And at anytime, Alexioco can delete the thread since he is host and moderator.
Alex does know Alan posted a thread on a self rolling wheel. And it is after I posted a thread detailing a self rolling wheel that Alan decided to harass me every timer I post about something. Check when I was doing an actual build. He said to, yet still harassed me. Why ?
I had said nothing about him at that time.

I remember a post on my forum (which i dont have now) that Ab Hammer (Alan) wrote about a rolling wheel, but
it was not the one you keep on about, it was an idea of his own...

So whats so important about this, has it got you a working wheel yet? I want a straight Yes or No answer please

[erickdt]

P-Motion, Jim, BA Hammer, Whatever the f*ck you're calling yourself these days,

You totally have a sick obsession with Alan. I'd be willing to bet that 75% of your posts since adopting the name "BA Hammer" have had in some way to do with Alan. Didn't your parents ever tell you that the best thing to do when you feel someone is "harassing" you is to ignore them? Apparently this idea is lost on you. Instead you go on and on ad naseum about "Alan this, that and the other thing... Whaaa!" I suspect this is because it's easier to criticize him than to confront the fact that you have had exactly zero success (probably from lack of trying anything in reality) in your quest to create a gravity powered wheel.

Now I have no position as to whether or not Alan is truly harassing you or not. I don't care, neither does anyone else. What I do know is Alan has a large body of work that is very impressive where as you have nothing more than a series of poorly drawn MS Paint drawings that rely entirely on fuzzy math and your own deranged concept of physics. I'm sure you'll reply to this post belly-aching about how everyone's ganging up on you but you need to recognize that you've brought this on yourself by constantly complaining about how Alan's "harassing you".

This is not a forum for schoolyard bickering it's a forum for discussing possible ideas for a self sustaining, gravity powered wheel. Grow up already.

[grayone]

  What do you call this ? And check the date on it. Tell me, what did I do wrong ? Wished to discuss something ?
It's dated May 2008. Tell me what I did. I mean, besides trying to discuss an idea.
I think it is in poor taste to say that for some sick reason I have it in for alan.
In the G-Force thread, if you read it, he was saying Ralph has it all over me and he is called Copernicus in Mississippi for his math. If so, why doesn't he discuss math ?
He did say his Keel Effect proves a lever can not work on a wheel. Am I required to suport his ideas when they run counter to what I believe ? And what does Ralph have to do with a  discussion about inertia ? That is what the thread was about.
>>    
Re: Perpetual Rolling Wheel ?
« Reply #3 on: May 11, 2008, 10:32:42 PM »
   Reply with quoteQuote
P-Motion

I work with my hands. I test with my hands. I observe the test and make notes. I design wheels and build them, and if they don't work I find out why, and take more notes. I don't spend my time with only math equations, for they will not tell any one if a wheel will work or not, they only help with the balances and imbalances.

This is how I work, hands on. Not arguing equations on the forums, the whys and why nots. I go out and build and find out.

You could use some good hands on practice and start seeing for yourself. Instead of trying to talk others into building what you come up with. I have never found anything that you have shown creditable for you are lacking the hands on experience, and it shows.
   Report to moderator   Logged
With out a dream, there can be no vision.

Alan

BAHammer; You call this harassment? HAH!! It looks like he is trying to get you to build something. My mother would of said something like.
Quit using you head as a hat rack, and get out and do some work.

I also notice on that string of yours. Perpetual Rolling Wheel ?
http://www.overunity.com/index.php?topic=4671.0
On post #8 a quote from you from the Bessler Quest forum. If this is so? It shows you as that cable guy, Jim Carry played. But for real to AB Hammer

Quote
But Alan, if it is my design, it will be known.
Of course, I can always modify the post if I want. And I'm sure that if someone successfully built a model based on my research and I kept quiet, they would too.
This would be because I can edit my posts. And I could change the design I posted.
It's up to you and if your design is different than what I posted. If people think it is the same and you say it is different, you will lose.
Think about it and let me know.

Bessler007; I found your web page. You have it in for allot of people working on wheels. Your words no longer have any credibility.