Stanley Meyer Explained

[h20power]

Well folks I'm still at it bringing dreams to reality. Here are the drawings along with the finished product, minus the wires & resin, for my latest transformer design. The technology is far more costly than I anticipated and as such I don't think anyone will be following my lead as things are simply too costly. As such I more than likely will be the only one moving forwards with this technology and it is my hope that people move to help with the cost of this technology so that it can see the light of day. I think I spent over $5k in this final push to get this technology up and running again.


Much work remains but I can honestly say I can see the light at the end of the tunnel now. I have done what I can to allow folks to understand this technology but the tech is complicated so there is only so far I can go in trying to help others understand how this technology actually works as one seems to need to have followed in my footsteps in life to be able to perceive this technology with the proper understanding of the sciences involved.


I am moving forwards at my own pace which is basically saying I am moving at a pace I can afford, lol. With a little luck and a lot of support hopefully this technology will finally make it into our world.


Peace and shalom everyone,
Edward Mitchell
CEO and Owner
True Green Solutions
https://gofund.me/87a49b22

[h20power]

Hello Everyone,


This transformer will be the largest VIC transformer I have ever made and moved forwards with to actually put wire in it. Right now I have to print out another bobbin holder for the CNC coil winding machine as the one I'm using now has a wobble that is unacceptable as I fear it will break the wire while winding the transformer. That print is going to take over 10 hours but it's being built my me at a cost I can afford and not some pricy machinist. This transformer represents years of work and study on this technology and will be a culmination of all I have learned about this technology.
Now since it is still a prototype it may or may not work but I am fairly sure that it will do something to get this technology moving in the right direction. One thing is for sure is this transformer took a lot of effort to build as I had to purchase a whole lot of new stuff just to be able to make it on my own. Like I said in the above post you are looking at around $5,000.00 USD effort to bring this transformer into our world. I got some help with the cost which I am truly grateful for as without help I more than likely wouldn't have been able to build this transformer until late next year some time or even the year after that. So to those that willing chose to help aid my efforts with this technology a big heartfelt thanks goes out to you all🥰[/font][/size][size=78%] . [/size]


If it works we will finally have an answer to just how efficient this technology is as I plan on demonstrating this even though I kinda already know it isn't a linear process as the electrolysis method is. Sorry to everyone for breaking the first WFC I got up and running correctly before I could take any measurements on efficiency of it. But I really got excited as the cell was operating producing gases and it wasn't getting hot. Some of you may remember this video of the little 3 resonant cavity up and running correctly: [size=78%]https://www.youtube.com/watch?v=hW78gKn1ZZ0[/size] But if not there it is again.


The reasons why it took me so long to get back on track is I got fed a lot of bogus information that I had to experiment my way out of from a lot of people we all trusted like Don Gabel and a few others. But the beauty of using the scientific method is in the end anything that doesn't work will be routed out through trial and error testing. The problem is the scientific method takes time and a lot of monies spent sometimes to get at the truth. But one thing everyone should know about me by now is I am persistent in my aims to get this technology into our world.


Please keep in mind that I do need help funding this technology as if this works it's only the beginning of the long road towards phasing out the use of fossil fuels.


Shalom Everyone,
Edward Mitchell
CEO and Owner
True Green Solutions
https://gofund.me/87a49b22

[h20power]

Hello Everyone,


Just so we are all on the same page concerning this technology. In this video I show for the very first time ever, and since, true high voltage being applied to the water fuel cell: [size=78%]https://www.youtube.com/watch?v=dQ6G4yIyLdY[/size]


How I talk about this technology is very different than how Meyer talked about this technology and the reason for that is I went after the science behind this technology. Most people don't know this but when Meyer passed away he was working on the injectors as they didn't work in the car and he was trying to figure out why it wasn't working. By follow the science the way I did I understand why the injectors didn't work for him.


In my showing of the science behind this technology you all have been shown that this technology is mimicking the earth's global electric circuit. You have been given a new theory that one day will be in the books of science that explains this technology in scientific terms. And I even went one further in comparing this technology to how plants break the bonds of the water molecules for the method of breaking the bonds of the water molecules is the same in that all that's being done is to take away the electrons from the atoms that make up the water molecules.


Right now I am busy working hard to actually bring this technology out but my funds are limited so I run around asking for support from those this technology will benefit when it does come out as it will be the general public that reaps the benefits of this technology thus they are the ones that should be supporting this technology if it is change they wish to see in their lifetime in the phasing out of the use of fossil fuels. I fully understand that if the general public gets behind this technology then they will have it if anything to say about it I have. I also understand that without support this technology is going to have a rough time making out to those that need tech like this the most.


With a little luck and a whole lot of work behind the scenes I am hoping this technology actually has a chance to make it into our world this time around. As shown in the photos I have what it takes now to move forwards with this technology. I feel the time is right for this technology to come out now as it does have some competition now that a company named, "Hysata" has come out with an electrolyzer with an efficiency of 98%. I am fairly sure this technology can beat those numbers but none have been able to show real numbers on this technology as it's not the easiest of technologies to get up and running properly and I hope to be able to change that soon.


Remember to support the cause,
Edward Mitchell
CEO and Owner
True Green Solutions
https://gofund.me/87a49b22

[alan]

Efficiency of 98% is nothing, Meyer's method has infinite efficiency.

[h20power]

Efficiency of 98% is nothing, Meyer's method has infinite efficiency.

Hi Alan,


For right now, no one knows the efficiency of this technology as all that have managed to do this never let out any true numbers on the efficiency of just what it was they were doing. Meyer never allowed anyone to put anything to his voltage intensifier circuit so no verification of the process was ever done.


If I am able to get the technology up and running I'll more than likely be the first one to ever put out efficiency numbers on this technology just as I was the first to show true high voltage being applied to the water fuel cell in a provable manor back in 2013 at the Global Breakthrough Energy conference held in Boulder, Colorado. As of right now it appears I am the only one that is close to getting this technology up and running correctly as it's complicated and expensive to make in low volumes. Due to all the false information put out about this technology I doubt anyone besides me right now can weed through that false information right now and get this technology working correctly. Trust me I have been constantly looking around to see just what others are doing and for the most part each and everyone of them are making the same mistakes that will prevent this technology from working for them. As of right now there hasn't been a single person, that I know of, to show true high voltage being applied to the water fuel cell like I did at the conference and if you are counting that was over 9 years ago.


This technology is far from simple and like I said very costly to make in small numbers. Add that to it being very complicated and a lot of false information going around that will lead people away from how this technology actually works and it's easy to see why no one has demonstrated high voltage being applied to the water fuel cell as I have done. My making use of the scientific method truly sets me apart from everyone else that is working on this technology. It's sad but I have seen a few people stumble on how this technology actually works to only leave the room in search for a another solution as they had no idea that they solved it.


I just uploaded a new video on YouTube to get things started as I attempt to bring this technology out through True Green Solutions: [size=78%]https://www.youtube.com/watch?v=JsQloRRwlC0[/size]


Shalom,
Edward Mitchell
CEO and Owner
True Green Solutions
https://gofund.me/87a49b22