Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze

[a.king21]

Hello elementSix,

Many many thanks for the insight and the link. As you ,I hope, have come to realise I am more of a doer than a thinker. I have more coils on the kitchen table than you can shake a stick at!!

I always thought the spark gap was a safety valve. Am I right? Are you working at 50 hz resonance? A week or so ago I was working with a patent that Zeitmaschine had posted, many hours wasted but some interesting things learned. Ferrite inductors produce much purer resonant decay than Iron cores. But try as I might I could not acheive the ascending bounce that I have just seen on the link you posted. Any way I am rambling on now, once again thanks.

Cheers Grum.

TK has two patents. One uses the spark gap as a safety feature, the other uses the spark gap as a mhz Tesla oscillator. The important thing is to switch the circuit on and off in a sharp as possible spike. The spike cemf is COP 12 . Bedini uses a bridge to harvest the energy. The cap should be as low as possible. In the Wardencliffe transmitter the cap was only .4 mfd.
Read up on 19th century exciters, and tremblers.
You can build a Tesla switch which is a mechanical on off device which operates at the speed of the motor.

[Zeitmaschine]

Very interesting sketch. This is the so called "Capacitive Inductor" I'm sure I have seen this before on one of the Russian forums. Could anyone translate what is written it may be of great help.

I had suggested this on page 964.

At least I think so ...

[Farmhand]

TK has two patents. One uses the spark gap as a safety feature, the other uses the spark gap as a mhz Tesla oscillator. The important thing is to switch the circuit on and off in a sharp as possible spike. The spike cemf is COP 12 . Bedini uses a bridge to harvest the energy. The cap should be as low as possible. In the Wardencliffe transmitter the cap was only .4 mfd.
Read up on 19th century exciters, and tremblers.
You can build a Tesla switch which is a mechanical on off device which operates at the speed of the motor.

I quoted your entire post but I'm only interested in the sentence in bold. You're kidding surely !

Care to demonstrate that C.O.P. 12 ?

Cheers

[elementSix]

Another part of getting a working setup is to slowly raise the voltage.  Don't start out with a high input, you have to slowly raise the voltage.  A delay. 
Could someone please Read this patent from Tesla.  I don't know if it pertains to this subject or not.  I think there are parts of it missing.  It is his patent on an Inductive device or Electrical Transformer.  He uses iron wire and/or thin iron plates to shield the secondary from the magnetic flux.  Can someone explain this device.  It is a very short read for a Tesla patent.  Which is why I think it has been altered.  He talks about having low current in the primary, So as to not affect the performance of the secondary's current output.  He talks about a time lag between the currents that arrive on the secondary coil and the purpose of the shield and its function of keeping magnetic saturation off of the secondary coil.  If someone could put in their two cents on the main function of this Induction device and if its anything other than a clever form of transformer..  Much appreciated.  EL6

[jbignes5]

Let me put it this way jbignes5, until you can show us that you can walk the walk, your theory on Kapanadze modus-operandi is no more valid than any other. As to whether I can put a model together without instructions, depends on how the model is presented. I look forward to seeing your working model. Until then, please do not write as if the rest of us are stupid!

In Thea first place my post was not addressed to you. Was it?


As for seeing the working model I encourage you to get off your butt and put it together yourself. Do the research and learn how to do it.. Oh that's right you are not here for that... Are you? I am doing the work as fast as my disability will allow. In fact most of my day is spent in pain. The few hours that I have without pain is because I lay my butt down and do no thing but research to get my mind off the pain. I refuse to take narcotics to manage my pain for very personal reasons.


So instead of sitting here demanding others do the work for you, your time might be better teaching yourself about this system and how it works. I am getting vastly tired of this, very quickly. You sit here doing nothing but criticizing anyone who tries to explain the process, including TK himself. He told you where he got the information. Now I suggest you go out and read and learn. But that's below you isn't it? In the first place even if I did show you my plans and the methods behind it you and others will simply dismiss it as a fake won't you. Just like you and others have done to TK. Even when he tells you where he got the information you sit here demanding others to show you it works. Why not prove it to yourself instead. That way there is no chance of faking at all. like I said all the information is in the links I provided and if you read the links you will find out that the magnetic quenched spark gap is absolutely required for proper impulse circuits. It is the explosive nature of that kind of impulse that generates huge movements of current in other matter, especially a copper plate when compared to ground through a capacitor.


It's all there for you to do. I am doing it slowly, now lets see you do something other then demand the answers.


I won't be posting here again for a while and I bet nothing will be done and a million other non related schematics will be posted. Prove me wrong.