Selfrunning 3 KWatts ERR unit powering 3 x 800 Watt lamps

[jeanna]

more info:
http://www.freewebs.com/narfschwartz/

Dan

Dan,
Your opening page is beautifully written.
EDIT: not the same Dan. See below for correction...
The way he re-told the hundredth monkey story is excellent.


I will post the last 2 paragraphs here for the sake of a lot of hope in our future!

====

"The Hundredth Monkey Phenomenon shows that when enough people are aware of something, the rest of us will also become aware as well. This simple concept that has restored my appreciation and love we have for ourselves and others can create an expanding energy field and a growing power in the world. This radical new support is what I needed to give me hope to offset the doomsday stories of world pollution.

   

There’s no need to feel helpless when we have the power to make changes by joining together and raising our voices in unison. There is more power in numbers than we ever hoped for. I call on everyone doing energy research to not only join together, but to work together and spread these messages to the world. We can be the bearers of a new vision to save the earth. We can dispel the old destructive myths and replace them with the truth that new kinds of energy are here now and are essential to continued life on our planet." quote from http://www.freewebs.com/narfschwartz/

thank you,

jeanna

[Dansway]

Dan,
Your opening page is beautifully written.
The way you re-told the hundredth monkey story is excellent.
Thank you.
I will post the last 2 paragraphs here for the sake of a lot of hope in our future!

Jeanna, I only posted the website after I did a search for the Dr.'s name.  It's not my website.

~Dan

[infringer]

Should be fairly easy to test one would think.

Some aluminum foil and some bismuith along with some fine copper coils ...

If it works it should generate something no matter what even the smallest amount of votlage..

Build an oscillator circuit to run at an an adjustable rate from say 700 - 1100mhz

I've seen crazy stuff tested here before this may work who knows...

Maybe not though too who knows I know there is a lot of big claims around that have yet to show solid proof it may be another one or it may be just what we need.

[hartiberlin]

Here is an interview with James Ben Schwartz with Bill Alek:

http://www.achieveradio.com/archplayer.php?showname=The%20%20Progressive%20Technology%20Hour%20with%20William%20Alek&ShowURL=http://audio.achieveradio.com/vortex-net-tech/Dec-13-2008-at-11-00AM---Vortex-Net-Technology.mp3


Here is Mr. Schwartz´s yahoogroup:

http://tech.groups.yahoo.com/group/noahsarkenergyresearch

Regards, Stefan.

[hartiberlin]

Posted with Permission from Dr. Schwartz:

Information Sheet about ERR

For many years I have been experimenting with new materials that support electromagnetic wave propagation in ways that are not observed in nature. Other research teams around the world are doing similar experiments that also backup this theory. I have been able to create materials that support this type of effect for light and other electromagnetic waves. Even some physicists are starting to challenge what was thought to be the basic laws of nature. Many of the hard-nosed skeptics are finding it increasingly more difficult to disprove the left-hand rule.

In nature, all materials seem to obey the right-hand rule. The fingers of the right hand represent the waves of the electric field, and when you curl the fingers around to the base of the hand, this represents the magnetic field; the outstretched thumb indicates the direction of the flow of power

Back in 1968 a Russian theorist; V.G. Veselago had predicted that new materials could be engineered to interact with our environment, which is just the opposite of how natural materials react. In 2000, researchers at the University of California-San Diego (UCSD) confirmed this, creating what's known as the first "left-handed" material. A special team at UCSD created material that caused fields to move to the left even though the electromagnetic energy moved to the right. The light waves produced in this material also produced an inverted Doppler effect. Researchers at MIT and the University of Delaware, is also exploring left-handed media.

We are now discovering that the things we held to be inviolable can in fact, be violated under certain conditions. Many research teams are already able to build structures that support this theory.

Much of my research over the past 17 years has proved that these new kinds of materials can cause different affects when it comes to magnetic fields. I’m already using left-handed material in my ERR (Electromagnetic Radiation Receiver) experiments. I’ve proven this theory with my ERR prototype. Lawrence Rayburn a researcher of electromagnetic fields has also proved this theory with his left-hand wound coils. Even though some of us have proven the left-hand theory, no one seems to want to admit that we have disproved one of the sacred laws of nature. 

You’ll find the drawing of my special experimental Flux Power Station in the Noah’s Ark Research Foundation folder in photos.. A special frequency generator is used to induce a series of alternating frequencies to create a flow of electrons when activating the magnetic flux field. This theory is still in the experimental stages so I still have a lot of research and testing for safety and other factors. 

The secret is in the material used, the size of the wire and the number of turns plus the frequency and how you alternate that frequency. There are many combinations that will allow you to get small amounts of electrons to flow.




I finished a simple set of drawings for my first 160,000 watt power station. I don’t want to release my blueprints because it might fall into the wrong hands. These simple drawings and information is not enough for other research organizations to copy our technology.

We still need to build the first prototype and test it over a period of time to make sure it’s safe and to fix any bugs that we might find. The smaller model worked very well but we don’t know how the bigger one will work until it’s built and tested.
 
This ERR Flux Power Station is designed to run a large house or you can add more Flux Power Vaults which is 10,000 watts or more each if you need more power. It can even be built big enough for a factory or a whole community of houses.

I’ve already started building the first prototype in the basement of our house in the Philippines. My crew has already poured the cement for the chambers. The copper and fiberglass tracks with all the electrical contacts where the Flux Plates slide into place are being built in our machine shop. After the chambers are finished and the cement is cured the tracks will be bolted into place. The cement work will take about two weeks to finish the 16 chambers. By then the first 10 tracks will be ready to install. Each Flux Power Plate as it’s finished will be slid into place and tested to make sure it’s making proper contact. After all 10 Flux Power Plates have been slid into place and tested we can bolt the airtight chamber vault door into place. Then we will be ready to test the o-rings with a vacuum pump. After the chamber has passed the vacuum test we can pressure-rise the chamber to 1.5 psi with a special gas. Then the first chamber will be ready to go on line producing 10 to 18,000 Watts DC power. The reason we’re not sure of the exact output is because we are developing new left-handed materials that could possible increase the output by as much as eight times. As each new chamber comes on line I can disassemble my older smaller ERR units. My older ERR units have become more bothersome and costly to maintain over the years.

The new Flux Power Plates should be maintenance free for many years (I hope). As we develop newer and better Power Plates the older Plates can be easily replaced by shutting down one chamber at a time.

After the frequency generator is shut down going to that chamber then the cover can be removed exposing the plates. If the new Flux Power Plates are the same thickness then the old plates are simply slid out and the new plates slid into place. If the new plates are thicker or thinner then the tracks will need to be replaced. After replacing the plates the o-rings on the vault door is replaced and the cover is bolted back on. The chamber will be vacuum tested and if no leaks are found then the chamber can be pressure-rised to 1.5 psi with a special gas and the frequency generator can be turned on. After output is tested the chamber is ready to be added to the power station.       
 
Drawing # 1 shows the chambers without the airtight covers. The chamber holds ten Flux Power Plates that are 48” X 48” X 4” which can produce 1,000 to as high 8,000 watts each depending on the Plates. As we design newer left-handed materials that support electromagnetic wave propagation we will be able to increase the power output. Each chamber is designed with special slots and electrical connectors to connect to the Flux Power Plates when they are slid into position in the chamber. The reason for individual chambers is so that the whole system need not be shut down in case of a Flux Plate burn out. One chamber can be shut down to replace one or more burnt Plates without shutting down the whole Power Station. It also shows the frequency and power lines. The lines coming from the frequency generator going into the chamber and the heavy DC output lines use the same sealed system.

Drawing #2 is basically the same as #1except it shows the gas lines going to each chamber and it has the covers bolted into place. Each vault has an airtight cement cover to seal the chamber so that we can extract all the air and fill the chamber with a special gas at a pressure of 1.5 psi. These covers with their o-ring seals are very important so that no air can leak into the chamber. Any oxygen in the chamber can cause flash burns between the plates. It also shows the electrical lines going from each vault to the main power box.

Drawing #3 shows a front and side view of the Flux Power Plates.   

Drawing #4 shows one of the inner aluminium plates which is different from the two outer solid aluminum plates. Each of these inner plates has 144 slots that are cut to 10 ½ X 2 ½ cm where 144 special coils are inserted. 
 
DRAWING #5 is a close up of the ten Flux Power Plates and the tracks.

James