I see an economic diasater coming...

[lancaIV]

Is the work world mental and social ready for the next Kontradjef-wave evolution step ?
                                       One industrial sector example:                           

                          Source: www.wiwo.de   -online 14.11.2013

                            and google automatic translator used:

Electric and hybrid cars are indeed a clean, but rarely a cheap affair.  In this country there is , for example, the BMW i3 from around 35,000 euros.  Who wants it more luxurious, has for the Model S from Tesla shell out more than 70,000 euros.  Reason for the high prices are mainly the expensive components such as the batteries, but also the complicated assembly of the companion.

For as long as cars drive concepts beyond the traditional internal combustion engine are still no proper mass products, the production can be difficult to automate.  While there is the Toyota Prius, which has now sold hundreds of thousands of times, but this also fails with at least 26,000 euros.

That hybrid companion and electricity in the future could be significantly cheaper, the Canadian designer Jim Kor wants to prove.  Namely hybrid cars directly from the 3D printer.

What at first sounds like a joke or a vision of the distant future, Cor tested for quite some time.  Now he stands before the final test: to print to a truly world-friendly car and drive with him through the country.

The first version of his Urbee mentioned vehicle combination presented Cor 2008.  It had only a few parts directly from the 3D printer.  Now Cor Urbee presented second  The car will be built almost entirely of printed parts and soon complete his first hardness test: a trip between New York and San Francisco and back. Twice across the United States so.

Thus Cor wants to show how resilient and environmentally friendly is his Urbee second  In the nearly 4700 kilometers of travel, the hybrid vehicle will only need about 38 liters of fuel - that is 0.8 liters per 100 kilometers.
Consumption of the printed mileage: 0.8 liters per 100 kilometers

The low fuel consumption thanks to the Urbee 2 of the construction and the drive concept.  Thus, the vehicle should be extremely easy for a next seven horsepower engine coupled to an electric motor.  The combination of the two drive systems ensures the low consumption, the developer says

Two years have Kor and his team took the time to plan the trip and make the Urbee 2 fit.  Kors and his two sons want to drive the car between the U.S. coasts back and forth.

As in 1903, the car enthusiast Horatio Jackson accomplished the first coast-to-coast ride, he needed it more than 3000 liters of fuel and more than two months. Now the team wants the same power with 40 liters of petrol in less than a to accomplish week.

To search Kor and his team are still supporters. Their Kickstarter campaign they want to solicit 30 000 U.S. dollars (about 22 400 euro) in capital.
www.epo.org to C.A.D. to C:N.C controled 3D printing machine= C.I.M.-industry,home-based

                       "FORMAT"-ION  like "house" printing:
                              http://www.contourcrafting.org/
                                 ( or Dante Bini tecnics )

Sincerely
              OCL

[lancaIV]

The 3D printing examples before for the good and now for the eventual bad :
www.n-tv.de from 09.11.2013 google translated

"Works beautifully"
U.S. firm presents Colt with 3-D printer ago

It is the first gun made of metal, which was almost entirely made from a 3-D printer. According to the company, the gun works fine. But actually it is the company is not about the gun.

The U.S. company Solid Concepts has made a tradition of the brand Colt M1911 pistol in a 3-D process. According to the company, it is the first gun made of metal that - was completely produced with a 3-D printer - with the exception of the springs. The gun "works beautifully," the company said in a press release. You've already gone through several passages with more than 600 successful shots, says the company blog.


There were no visible signs of wear. A movie company shows how the gun is fired by means of a first cord. An employee of the company then shoots himself with hits from the 45's and about 25 meters from the mark.

Solid Concepts point was not about finding a cheaper, easier or better way to make a weapon engineer Philip Conner said in the video. The company the aim was to refute the conventional assumption that DMLS parts are not strong enough or detail for practical applications. DMLS is a method developed in Germany in the 3-D printing, which stands for Direct Metal Laser-Sintering.
"This is not about the gun"

The California-based company specializes in custom 3-D printers. Until now, the gun is not for sale, Solid Concepts, however, is considering going into production. The price of the 1911 would be in the five figure range, the company said.
More about
04:11:13 prosthesis for less than seven euros
12-year-old lives with artificial hand out of the 3D printer
28/08/13 NASA tests engine part
3D nozzle is stable enough for use in space
20:06:13 merger in the future industry
3D Printer manufacturers are aimed at private buyers
29/05/13 BKA warns of weapons from the printer
3D printing has dangerous possibilities

The company emphasizes that such a gun can not be made with a commercially available 3-D printer. "A printed gun metal requires equipment that costs 400000-1000000 dollars," says the company blog. Again, it is emphasized that the production of weapons was not in focus. "The story that we want to communicate, it is not about the gun." In fact, it is a question which shows the gun with regard to technology and the possible complications.

The production of arms with 3-D printer is considered to be quite a security risk. In the UK the end of October, a deduction  and a magazine had been found, which apparently came from a 3-D printer. Back in the spring, a blueprint for a gun from the 3-D printer showed up in the net. These weapons, however, are not made of metal but of plastic - which makes them even more dangerous from the perspective of the police. "Because they are plastic, they are weapons of detectors difficult to discover," said a British police inspector in Manchester.
Series of images
Just once printed
Sculptures, as small as a grain of sand


and
3d machine printing of micro/medio/macro " overcontinental cruise missiles",neurological software equiped,flying above and under the radar sphere but possibly detected by killer-satellites !
Some years before I reed in an australian/ozeanian web-page about 50.000 AUS/NZL/US ?
DIY-cruise missile production : now the cost will goes down !
http://www.interestingprojects.com/cruisemissile/

With all my praegard
                                 OCL
  p.s.: beginning with private/govermental moon rockets:

       Who owns the earth moon ?
       Our solar system planets  ?
       Who will own it ?

  "not here,not yet !" Durban conference U.N. secretary (K)ofi Annan (ghanan tribe  Chief-son)
These questions and answers are immanent: X-prize and 500days-Mars-test(e) in Russia
related
                                      U.N. theme conference ?
                               

[the_big_m_in_ok]

lancaIV the world is running out of cheap fossil fuels.By 2050 those changes may have occurred.The world will be adapting to the new reality.It could be that by that time the USA will have taken over the Saudi oil fields by force.My book that I have already mentioned has given me their glimpse into the future.triffid

@IancaIV
triffid may have a point.   Free energy has to come.
I myself have an idea of combining Don Smith's multiple coupled tower induction entrained power coils with a long, highly positioned antenna, connected to a central coil that multiplies what comes down to the central coil and increases the power available by any amount, depending on the number of coils surrounding the central coil.   Power is taken each surrounding coil off by a step-down coil and then rectified to a battery or a bank of batteries.


Simple system, really.


--Lee

[lancaIV]

Hello Lee,
if I go actually to the garden I could use a trap to catch butterflies,different species.But I do not think that you want to use your antenna-trap for kind of this catching but for this:

                    from the actuall    www.keelynetcom  -page
http://cognizantnationhq.weebly.com/uploads/1/0/8/0/10802824/freeenergyrevised.pdf

and here an old publication about "static atmospheric energy conversion" referring also Tesla:
http://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=4&ND=3&adjacent=true&locale=en_EP&FT=D&date=19220710&CC=GB&NR=157263A&KC=A


How works an (room) air ionizer ? Counter conversion ?Simple sytem, the radiation receiving-amplifying-tuning-equalyzing :
like a dolby (mare) sound surround converter         ( kaori-caracol sound : rauschen)

Sincerely
               OCL
p.s.: other Otto Traun Research Lab developed  solutions :
http://worldwide.espacenet.com/searchResults?DB=EPODOC&PA=otto+traun&ST=advanced&bcId=1&compact=false&locale=en_EP&page=0&return=true

[lancaIV]

                                        HERMANN SCHROEDEL VERLAG KG
                                                        Edition 1974
                                                         Dorn-Bader                 
                                                   
                                                             Physik
                                                          Mittelstufe
                                                translated by google
                                                      page 419-420
                                                         ATOMPHYSIK

2.The natural radiation exposure , radiation protection

Experiment 11 : We are a bare wire clamp over night 1-5 m length about 0.4 mm diameter insulated and connect it to the negative pole of a high voltage rectifier 3000 V to 6000 V.Den positive pole grounded wir.Am next day we take the wire off again , and we strive to him as little as possible to beruehren.Einen Loesch small strips of paper Briefmarkengroesse once we fold and pull the wire through so that its entire surface on.The wiped wiper marks on the paper are clearly visible. We load the paper , folded as it is, under a counter tube (not professional technician caution window! ) And measure every 15 minutes, the count rates 1 Minute.Die measurement gives a graph as Abb.420.1 . In the air there are positive ions of radioactive substances deposited on the wire haben.Es is getting the nuclei great speed primarily to the decay products of radon and of an isotope Thoron.Durch the Rueckstoss the alpha- decay have so that their Elektronenhuelle is partially stripped , so they are initially positively ionized and are attracted to the negative wire.
After Abb.420.1 a half-life of 33 minutes seems to be , but in reality the process is very complicated : the derivatives decompose and form again
disintegrating derivatives .

Only many more detailed studies can schaffen.One thing we see from the experiment with security:Our environment contains radioactive Stoffe.Dies always has been the case for millions of years, long before the atomic bomb tests and the construction of nuclear power plants.Also are also in our body, especially the bones, radioactive nuclear species eingebaut.Dies causes a total natural radiation Bela Sunt, we can not escape.However, we can keep the additional Strahlenbelasung small......
More question about the "free sub-elementary electro-magnetic energy source" ?


Sincerely
              OCL