Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Solid State Orbo System

Started by Groundloop, January 06, 2010, 12:21:24 PM

Previous topic - Next topic

0 Members and 7 Guests are viewing this topic.

Print
Go Down Pages 1 ... 49 50 51 52 53 ... 148
User actions

rave154

#250
February 10, 2010, 12:46:45 PM
Thanks mag, that helps put it all into perspestive some.

Magluvin

#251
February 10, 2010, 06:29:59 PM
While I was working, I had some thoughts. I have a few more computer cords around to get a couple more beads from. I dont want to take the first 2 working ones apart to keep as a reference.
What I was thinking is, these 2 cannot be the best there can be, not off the whim. So Im going to combine what I know about these 2 and try some different configs with the windings and compare. I dont have anything down to a science so try and test is the best I can do till I have some variations to go by. 2 is not enough. But going with what works for now is the best bet.
If I have 4 different ones, I should be able to get a handle on which direction to go from there to get closer to what is better.

Mags

Magluvin

#252
February 10, 2010, 08:44:34 PM
Some more thoughts.

In the beginning, when I had seen the flux gate Bruce had posted with the toroid on the left and the pickup on the right with a gap, I thought, wow, what a great idea. But now i have to question.
The amount of energy it takes to get the toroid to saturate, is it equal to or more than the energy produced by gating the flux of a mag?

The only way to find out is to use a magnet that, while conducting flux through the toroid, is able to saturate the toroid core also. If it is any weaker, we are failing to reach full potential. If it is stronger, will the flux from the magnet overcome the toroids field we are trying to saturate the core with?

My Orbon is just a simple idea to try and produce the generating effect of flux switching. Nothing calculated, just try to fit what I got and see what haps.

Can it be that the end result can only ever be under 100% efficiency, like many other devices?

All in all, Im happy that the idea of it works at all. And I cannot discount it yet from the little that I have done.

A circuit that I messed with last week, a switching ps type, pulsing a Big coil and the bemf is captured off the coil, I had made a vid of the output burning a light bulb. Vid below, and please read the info there on my errors. The errors were why I had not posted it, but now I am and will do a new vid here soon with corrections and findings
I am going to revisit, as Bruce would say, this setup. I see some interesting things here that I need to find out what was going on with the in and out connecting. But in the setup, when I put the 5ohm res on the output, it was very close to the total watts of what the 5v 1a ps could put out. Under 100% but pretty close.  But I need to find out why only 30v without the in/out connection and 60v with.

http://www.youtube.com/watch?v=B5uJL--N_qo

Mags

Bruce_TPU

#253
February 10, 2010, 09:43:31 PM
Hello ALL,

I have spent the evening working on my forms for my homemade nanoparticle iron oxide flux multiplier beams... LOL  (See pictures below)  I am not going to mold them up until Saturday when I have some real time.  I am going to video the process as well.

The virus is off of my computer after much work, but it damaged some of my registry I think.

@ Mags

I wound my coil with the taps, but it needs far more winds to be added.  I have a pulser being made that I will be using to experiment with our SS orbo and also with the orboton.

I did fool with it a bit, using my rotor and relay as switch.  The magnets sure hummed a pretty note, but it needs more winds and a real pulser. 

Lastly I would caution you and others experimenting with this, to only use an analog meter for measuring voltage, or scope.  Digital multimeters are pretty much useless for this type of research. 

Cheers,

Bruce
http://energyfreedomreport.com
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Magluvin

#254
February 11, 2010, 03:31:05 AM
http://www.youtube.com/watch?v=uHhZihBbmFs

ok figured it out.  Tricky tricky.  =]

Mags
Print
Go Up Pages 1 ... 49 50 51 52 53 ... 148
User actions