Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Solid State Orbo System

Started by Groundloop, January 06, 2010, 12:21:24 PM

Previous topic - Next topic

0 Members and 12 Guests are viewing this topic.

Print
Go Down Pages 1 ... 50 51 52 53 54 ... 148
User actions

Bruce_TPU

#255
February 14, 2010, 11:57:15 PM
Hello ALL,

I received in yesterday, my magnets for this build!

Two (2) 1/2" x 2" N42 Magnets and Two (2) 1/2" x 1".

I was too sick today from either stomach virus or food poisoning to do any work on this.  Wasted the whole day in bed.  I hope tomorrow to start working on my flux forms.

I still need a toroid that will saturate.  Regardless of what anyone says, the Magamp is not it for me at this time.

I ordered all the way from AUS the same one as used by Ossie and Jimboot that was successful.  With the exact same wire as they used.  When it arrives, I will be ready to roll.

Cheers,

Bruce
http://energyfreedomreport.com
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

synchro1

#256
February 15, 2010, 01:48:19 PM
@Bruce-TPU:  Sorry to hear about your flu like symptoms. My first thought is that they may have been caused through contact with the highly toxic materials you're working with. You may have inhaled particulate matter or resin fumes or absorbed them through your eyes or skin pores. My advice to you is to purchase a box of disposable latex gloves, a painters mask with filter and eye goggles. Avoid any and all exposure to those chemicals. You can find all this safety equipment at your local hardware store for little cost.

Bruce_TPU

#257
February 15, 2010, 02:57:57 PM
Quote from: synchro1 on February 15, 2010, 01:48:19 PM
@Bruce-TPU:  Sorry to hear about your flu like symptoms. My first thought is that they may have been caused through contact with the highly toxic materials you're working with. You may have inhaled particulate matter or resin fumes or absorbed them through your eyes or skin pores. My advice to you is to purchase a box of disposable latex gloves, a painters mask with filter and eye goggles. Avoid any and all exposure to those chemicals. You can find all this safety equipment at your local hardware store for little cost.



LOL, I don't think so.  Activated charcoal is perfectly safe, and I have not yet unwrapped the iron oxide.  Just a stomach virus, but feeling a bit better today.

@ ALL

This is exactly what we are working to do, from JLN labs.  The differance is he is fully saturating his toroid.  I know that is an issue.  Also, think three dimensionally.  a magnet on both sides and two more pick up coils.  Pick up coils everywhere... LOL

http://www.youtube.com/watch?v=SjDbIrKIVXs

This is the EXACT premise... only a certain amount of power is used to switch the toroid.  So, we switch the toroid and oscillate the flux.  Back to what we are trying to build. 

I have ordered a different toroid.  Tonight I glue (special movable type of glue) and tape up my forms. 

Cheers,

Bruce
http://energyfreedomreport.com
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

synchro1

#258
February 15, 2010, 03:51:26 PM
@Bruce, Glad you're feeling better. Thanks for the new JLN video link. Awesome, fascinating new definitive proof of concept video from JLN. He's pulsing at 200 Hz, oscillating frequency of magnetism estimated to be 159 Hz. Has anyone checked out the "EMF Safety Superstore" Goggle pulls up the link. Finemet and Metglass fabrics and sheet metal rolls. I found the ideal Mu-Metal wire I've been searching for. High nickel content.They maintain it can be twisted, braided, shaped into toroids and of course spirals. Two different thicknesses. A fine flux blocker core, with good attraction, high permeability and ductability for fashioning custom shaped easily wound cores. They won't ship abroad, so it's out of reach for me right now down here in Panama, but it's well worth having a look at this site.

Bruce_TPU

#259
February 15, 2010, 08:59:51 PM
Evening ALL,

Forms are now glued, taped and measured.  Ready for the mixture.  You gotta love popsicle sticks and small scrapers for they are next to be used.

It looks ugly, but there is a purpose to my madness...Blue tape is "painter's tape" and very easy to peel up.  Glue stick is "restickable".  The forms have to be able to be removed when my nanoparticle flux bars dry!   ;)

Cheers,

Bruce
http://energyfreedomreport.com
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 50 51 52 53 54 ... 148
User actions