Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Solid State Orbo System

Started by Groundloop, January 06, 2010, 12:21:24 PM

Previous topic - Next topic

0 Members and 15 Guests are viewing this topic.

Print
Go Down Pages 1 ... 94 95 96 97 98 ... 148
User actions

magneto_DC

#475
March 09, 2010, 08:27:59 AM
Another way:

We WANT B-flux NOT leaving core!
Is Episode 8 (simmulation) right way?
Is Episode 9 right way?
Are both?

When yes,...

....Where is E ~dA/d.... (x,y,z,t) biggest? In what direction?
How to grip it? How to do winding?


I dont have an idea, how curl-free A looks like, and how E made from dA/d... looks like.


So, I WANT close-loop B, I WANT curl-free A, I DONT want bemf anymore.  ;)

Regards
magneto_DC

synchro1

#476
March 09, 2010, 12:16:00 PM
Nicolay E. Zaev determined that ¨direct conversion of environmental heat to electric power is possible in the process of charge discharge¨. After the toroid cools from the demagnetization, it converts environmental heat to electricity. This is called Work, and is the opposite of entropy. The toroid converts heat from around itself to do the work of generating electricity. The amount of work is a function of the material alloy. Some alloys can do more work than others. Zaev has them classed according to their Lambda ratio, input to output. Nanoperm is at the top end of the scale. The toroids that are not cooling are not domain flipping and are not generating any power from conversion of room heat. Temperature loss is directly proportional to output!

Bruce_TPU

#477
March 09, 2010, 09:01:29 PM
Hi Gyula,

Okay, battery is recharged, and found out that I had also blown all of my 4 large LED's.

Replaced them with a different LED.

Any who, with no load, I ran the following test:

SSG3 Ohms reading: 
50.3 Ohms
No Load Voltage:
30.2 volts
50.4 resistor added in parallel
New ohms reading is 25.3 ohms for SSG3
No Load Voltage
1.8 volts

On a side note, I am lighting 4 led's in series, 25ma 3.6V (max) and also in series with them is one 28V 40ma bulb.  LED's fully lit, a glow on the bulb, and 15 volts on volt meter.

If you can recalculate for me, what size cap to add and I will get it ordered.  Thank you!

@ ALL
I did get a hold of the laser thermometer and it shows a definate drop in temperature... But only 3 degrees, when running.

I suspect (and cautioned) that the magnetic fields were effecting the electronic temp probe. 

But, I still wonder...LOL

Any who, parts are in from digikey and it's time to play!

Cheers,

Bruce
http://www.energyfreedomreport.com
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Bruce_TPU

#478
March 09, 2010, 11:11:35 PM
Evening ALL,

I ran two very intersting experiments this evening, using the exact circuit as posted by JLN Labs.  Strange results, at least to me, but you can decide and comment.  Tomorrow I will replace resistors with lesser values, and with lights after wards.

Self explanatory below.  Pay special attention to resistor values and output. 

Cheers,

Bruce
http://www.energyfreedomreport.com
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

exnihiloest

#479
March 10, 2010, 04:23:23 AM
Quote from: gravityblock on March 08, 2010, 05:26:48 AM
Why does this cooling effect bother you?
...

Your reply is the proof that you, not me, is bothered with cooling. You spoke the first, not me, about cooling in this thread.
For me there is no cooling so I'm not bothered!
If I detect one in the future, I will inform you.  ;)

Print
Go Up Pages 1 ... 94 95 96 97 98 ... 148
User actions