Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Magnet Orientation ? - Bedini 10-Coil

Started by CompuTutor, January 07, 2010, 10:54:57 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

CompuTutor

I seem to having trouble finding a real picture
that shows the shape and placement of magnets
in the 10-Coil original Ubber-Bedini, or the newer kit.

I know they are north-to-north,
but I cannot find a pic anywhere.

There are indications of the spacing
and total magnet count in the videos.

But what shape are they ???

Are regular cube magnets ground
to match the radius curve as example ?

I read every topic heading,
and searched for a while.

But I cannot find a definitive answer.

The kit is $4000, but no exploded view.

If a pic has been posted,
I cannot find it, sorry.

CompuTutor

I'd just edit the above post to add these pics,
but this is the last remaining forum that doesn't allow edits.....

How do people correct their mistakes?
(After less than 24 hours of future to reflect?)

I hope this clarifies my question.

Has anyone here bought one of these?

Sader was having to edit my post to add the second pic too.


Schpankme

QuoteThe kit is $4000

This made me laugh so hard, I nearly pissed-myself!

Schpankme

Stand back everyone, I will now charge the battery

CompuTutor

Think that is funny? (Me too...)

This is my opinion on this,
and I feel I have this right.

I feel that having to purchase
the whole ten coils set complete
is a big mistake on their part.

Assuming you look at the video
I linked to below and see both
the coils and the boards in it.

The 4K is not such a  gouge at all.

Just machining costs and wire poundage considered,
then there is the silicon farm of power parts...

But it should be offered as a starter kit.

Everything mechanical only,
and the sense & lightshow section,
and with ONLY ONE COIL + BOARD.

Then a separate kit with one coil
and the parts to populate the board.

You could buy the prime mover complete,
and finish it in nine additional steps.

That would have been far more approachable
by people in these trying financial times we live in.

I have called and written Rick and John about this,
and even posted at the Yahoo group about this
(the posts were deleted...).

Amazingly juvenile activity if you ask me...

Seems they think it is a secret of some kind or something. LOL  ::)



Well the "Official" infomercial shows Rick's kit at the end:

http://www.youtube.com/watch?v=nA2KtZ45nXA

You can save an MP4 of it for stills and rewinds here:

http://www.savevid.com/video/official-bedini-10-coil-kit-infomercial.html

You can look over their kits here:

http://rpmgt.org/order.html



Anyway, it is NOT a copy of John's unit at all.
Not even close at all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

In fact, a person that has received (Some of) that kit
has responded to my email request for additional info.

It has (Single) Neo's about 1" long and 3/8"x3/8".

Not even close to what John used in his.

There are NOT pairs of magnets
pressed north-to-north in this kit !

Here are a few snaps of the infomercial's vid.

I included the aluminum wheel too,
this kit powers some lights for show.

I suspect these are for that,
and possibly the timing coil too.

UPDATE:
I have just received confirmation email pics
than confirm a (Single) NEO plastic magnet holder.
NO SHARP NORTH.



Schpankme

"You will be able to run the machine not only at 12V and 24V inputs, but over 100V. The larger the battery bank used the more you will get out" http://potentialtec.com/#10Pole

Here's what I noticed from the BEDINI INFOMERCIAL:

1.) Not built like the 10-coil alluded to in the VIDEO - Energy From The Vacuum ][
      (Bedini says; "this is The EXACT COPY of what i built of what i showed In Energy From The Vacuum ][")
2.) The unit shown was poorly constructed
3.) Shown to be Built of cheep materials, easily breakable
4.) The fit and finish (quality) was totally lacking for the $4K KIT price tag.
5.) No cable routes, no dust covers, no end caps (Wires hanging every where)
6.) John Bedini would not let Rick get a word in edge-wise; Why was Rick in the video?
7.) Where are the performance numbers, what will it charge?
8.) Rick UNPLUGGED his electric car from the WALL-OUTLET in the SHOP (priceless)

- Schpankme
I took the little blue pill and got 4-hours of OverUnity (COP 5);
that left me with 3-hours and 58-minutes of staring at it!