Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Bruce's Discovery, Tesla's Missing Link for his Unipolar Generator!

Started by Bruce_TPU, March 21, 2010, 07:22:45 PM

Previous topic - Next topic

0 Members and 12 Guests are viewing this topic.

Print
Go Down Pages 1 ... 22 23 24 25 26 ... 36
User actions

innovation_station

#115
May 04, 2010, 07:35:12 PM
Quote from: Bruce_TPU on May 04, 2010, 07:52:46 AM
Hey guys,

I appreciate the concern, but it is "just" money.  Worst case, and I end up selling a bunch of magnets on ebay.  I have spent so much money on OU research that has not worked, but I know this will produce power.  Will it be OU?  There is no way of knowing until I try. 

Electromagnets require electricity.  Not the route to OU in my humble opinion for this build.  These magnets are powerful with seventy five pounds of holding force, each.  I have no intention of allowing them to come together.  But, if they do, I will have purchased a magnet seperator, from K & J Magnetics.

So, onward we go!  When I think of Marco, Giantkiller and Ironhead, who have spent considerable fortunes building, not to mention Moby, it is a drop in the bucket.

Cheers,

Bruce
bruce im glad you have persued your own path .. this is infact what it is all about .. its a big sand box ..

you have named many  people i enjoy reading there work .. from time to time ! and to each much respect is sent !

: )

i have been able to get large neos .. for 10 bucks each .. 200 lb pull  1"x 2"  i have 10 .. for a high torque pulse motor i ever get that one done ....  lol

i cant be sure where they came from any more .. some where in the US

ist
To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

THE !STORE IS UP AND RUNNING ...  WE ARE TAKEING ORDERS ..  NOW ..   ISTEAM.CA   AND WE CAN AND WILL BUILD CUSTOM COILS ...  OF   LARGER  OUTPUT ...

CAN YOU SAY GOOD BYE TO YESTERDAY?!?!?!?!

broli

#116
May 05, 2010, 07:20:49 PM
Have been out of the loop in the homopolar area but what you are doing is excellent work. I have never investigated pancake coils too deeply in HPG's but with my gained knowledge they COULD produce a higher voltage than a plane disc. I put that in capitals because it's a very important assumption, because if the voltage is higher you can instantly build a zero back torque generator.

I just quickly went over this thread but I can't say I fully understand the setup.

Bruce_TPU

#117
May 05, 2010, 07:50:21 PM
Quote from: broli on May 05, 2010, 07:20:49 PM
Have been out of the loop in the homopolar area but what you are doing is excellent work. I have never investigated pancake coils too deeply in HPG's but with my gained knowledge they COULD produce a higher voltage than a plane disc. I put that in capitals because it's a very important assumption, because if the voltage is higher you can instantly build a zero back torque generator.

I just quickly went over this thread but I can't say I fully understand the setup.

Hi broli,

The set up is simple and straightforward.  Instead of using 10" single magnets at the cost of thousands, I am building a "virtual" 10" magnet, by using many 1"x1" axial N52 magnets.  All poles will be facing in the same direction, and magnets held by very THIN steel.  This will again be duplicated for the second 10" "virtual" magnet.

Next, I will have five pancake coils, each made of 40 feet of 12 awg stranded (42 strands) wire.  Each pancake coil is the Tesla bifilar coil.  Between each set of coils is a thin Iron oxide coating, to amplify the field lines.  It is very uniqe and my own ideas and creation, if I say so... lol

The power will be taken off with brushes.

My bearings will be magnetic and as close to friction free as possible. 

What to drive it with, that is still a question.  Perhaps a very small hobby motor and pulley transmission.  Something very low power.  So, that is the set up!

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

broli

#118
May 05, 2010, 08:23:46 PM
Quote from: Bruce_TPU on May 05, 2010, 07:50:21 PM
Hi broli,

The set up is simple and straightforward.  Instead of using 10" single magnets at the cost of thousands, I am building a "virtual" 10" magnet, by using many 1"x1" axial N52 magnets.  All poles will be facing in the same direction, and magnets held by very THIN steel.  This will again be duplicated for the second 10" "virtual" magnet.

Next, I will have five pancake coils, each made of 40 feet of 12 awg stranded (42 strands) wire.  Each pancake coil is the Tesla bifilar coil.  Between each set of coils is a thin Iron oxide coating, to amplify the field lines.  It is very uniqe and my own ideas and creation, if I say so... lol

The power will be taken off with brushes.

My bearings will be magnetic and as close to friction free as possible. 

What to drive it with, that is still a question.  Perhaps a very small hobby motor and pulley transmission.  Something very low power.  So, that is the set up!

Cheers,

Bruce

Ok then I had something else in mind. I made a drawing of what I thought you were doing. No need for brushes, of course that's a dangerous slope. Basically if current flows you win, if it doesn't you lose  ;) .

Bruce_TPU

#119
May 06, 2010, 08:09:57 AM
Hi Broli,

Your picture is close!  take away the disc all together, disconnect any electrical connection to the magnets (for now!) and sandwich 5 of the bifilar tesla pancakes together, with a thin coating of black iron oxide (non conductive) between them, and you will have my initial set up, exactly! 

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.
Print
Go Up Pages 1 ... 22 23 24 25 26 ... 36
User actions