Tesla is the father of the TPU

[bajac]

My first post failed. I am new to this website and I need to learn how to use it. I was trying to post the following:

I just sent the email below and attached PDF file (sketches) to several free energy nonprofit organizations. I would like to add that all free energy devices based on the application of high voltage DC pulses to a coil are based on Tesla discovery. It includes the devices form Steven Marks, Edwin Gray, etc.

My email reads:

Because of my workload, I will not be able to build a prototype for the next couple years. The purpose of this letter is to publish it (TPU theory of operation). Once in the public domain, I expect many people could build the TPU, test it, and create a mathematical model that can be used for design purpose.

It is also my hope, a) to stop what I call the “Spanish Inquisition” of the 21st century, in which many people dedicated to science are still being killed and threatened, and b) to awake the scientific community from colleges and universities. These educational entities should be ashamed for marginalizing the man who has made the greatest contribution to human society. Can you imagine our present world deprived from (Tesla) poly-phase electrical system? Or, can you imagine our future world furnished with Tesla free energy technology? Tesla was very right when he stated that our future belongs to him (isn’t it?)

(FROM LETTER)
Less than a year ago, I watched a video of Steven Mark’s Toroidal Power Unit (TPU) and I was shocked to see a free energy device with such a high energy density. These videos can be found at:

1.   http://www.youtube.com/watch?v=0aDViLnziT8
2.   http://www.youtube.com/watch?v=XQXXodFVUCA
3.   http://www.youtube.com/watch?v=Hq1lhuBFmDI

I immediately suspected that this apparatus was using a technology that is not taught at any place or college. I was intrigue and I started an internet search for more information about the TPU. After few months, I was not able to find any relevant information, just a bunch of published lab experiments claiming to be closed to having a working prototype. The approach for most of these experiments is to have three coils spaced at 120º in a circular core and each being fed with a square waveform 120º out of phase. The more I studied them, the more I got frustrated. I felt even worse when I learned that Mr. Marks has been hiding for more then 10 years. It all looked like this wonderful technology reached a dead end.
However, I was not ready to give up. I needed to change strategy, I realized that I was not going to find any do-it yourself manual or schematic. Then, it was when I decided to look for information on any physical experiment that will allow me to make the connection and figure out the operation of the TPU. I have known for some time that Tesla did some experiments with high frequency and high voltage coils, and that he was also awarded many patents related to these experiments. I started on using new keywords for my search, “Tesla”, “free energy”, and “high frequency coils”. After a few days of searching, I hit the jackpot. I came across with a PDF book “The Free Energy Secrets of Cold Electricity” by Peter A. Lindemann, D. Sc. Mr. lindemann had already taken on the task of connecting a free energy device from Edwin Gray with the work done by Nicolas Tesla. This book was really my Rosetta Stone! I will keep the following explanation simple, but it should be sufficient to understand the basic operation of the TPU.

1)   What I learned about Tesla experiments

Figure 1 (attached) is a sketch illustrating the physical phenomenon discovered by Tesla around the year 1890. Figure 1 shows a square wave DC voltage source being applied to a solid copper wire. Based on hundreds of experiments, Tesla found that if a high voltage DC pulse is applied to a solid copper wire, a harmless energy will radiate perpendicular to the wire if the DC voltage pulse is tuned within certain parameters. The parameters are related to the DC pulse voltage, frequency, and duty cycle. Tesla defined this radiating energy as being of different type and of different behavior than the known electromagnetic waves. That is, the radiant energy cannot be defined or predicted by using Maxwell equations.
Tesla had to device a new method of analysis for his unknown “radiant phenomenon”. Tesla noticed that this radiant energy can travel faster than a conventional electric current based on charge particle because it seems to have no mass. Tesla observed that this radiant energy can penetrate almost any material and will produce electrostatic effects when striking metals such as inducing voltages. This type of energy is also known as “radiant electricity”.
Figure 2 (attached) represents the basic of the Tesla “Electrical Transformer” as described in his U.S. patent # 598,138, awarded in November 2, 1897. The construction of this transformer consists of an air core, a 2-turn primary coil, and a multiple turn secondary with a coned shape. If a DC pulse voltage is applied to the 2-turn primary coil and tuned to meet the Tesla conditions, a) a radiant energy will be emitted out perpendicular to the solid wire of the primary coil, and b) a voltage will be induced when the radiating energy reaches the secondary coil. Tesla found that extremely high voltages can be induced, which otherwise would not be possible to obtain by using standard electrical transformers based on magnetic couplings. Furthermore, Tesla also discovered that high power gains (in the thousands order of magnitude) can be achieved with this electrical transformer.

2)   The TPU embodiment

Figure 3 (attached) is my proposed embodiment of a TPU based on Tesla teachings on radiant electricity. It consists of an air core transformer with a toroidal shape. The primary is constructed with a 1 or 2-turn solid copper wire. The primary coil is placed in the center of the air core. The secondary consists of a thinner solid copper wire wrapped around the air core. If the applied DC pulse is tuned to meet the Tesla conditions, 1) a harmless radiant energy will be emitted from the primary coil, 3) a voltage is induced when the radiant energy reaches the secondary coil, and 4) from Tesla experiments we also expect to have power amplification.

3)   My observations

It is clear from the text that the tuning or matching of the DC voltage source parameters is critical. The voltage level, the frequency, and the duty cycle (pulse width) must be just right. Tesla stated that the pulse width should be less than 0.1 micro-second. It seems that the goal is to apply a high voltage DC pulse with a corresponding pulse width sized to minimize the flow of conventional currents (electrons, ions, etc). Recall that an electrical current has an associated magnetic field. We are not interested in generating magnetic fields, but radiant energy.
I am not convinced that the Ether theory can explain the power amplification effect. I think the power gain is due to the fact that there is no interaction between the radiant energy originating from the primary coil and the magnetic field generated by a conventional electrical current circulating in the secondary coil in response to a connected load. In other words, Lenz’s law does not apply to this device because the coupling between the primary and secondary coils is not magnetic but radiant. An increase of load current in the secondary will not force an increase of primary current as it is the case for standard transformers with magnetic coupling.
The radiant energy cannot be generated if a sinusoidal voltage is applied. If we are looking for radiant electricity we must excite the primary coil with a sudden change of high Vdc pulse.
Finally, I do not recommend using too many turns for the primary coil; otherwise, the self-inductance may affect the shape of the applied DC pulse.

PS:
Please, make this site more user friendly. I do not know what "Options" means and there is no help for more information or calrification.

[innovation_station]

there is more to it and YES YOU need to make a magnetic feild ..  and if you make 1 like you have showen in your dwg ...

you are makeing a magnetic feild from your primary 1 or 2 or 3 turn coil ..  and colapseing it ..  this is where your radient spark comes from .. you can use high voltage or low voltage high amprage ..  or add NEO ZAP .. : )

so ..   the magnetic feild there are 4 in actualaty...  from 2 coils all 1 wire ...  you have  your primary of low self inductance wich produces a HUGE SPARK.. and you have a coil wraped around that coil .. like otto's test .. 

so now you have a coil of higher self inductance .. you BORROW THE CURRENT  from the source .. to create the large magnetic feild ..  from the primary .. could BE A PANCAKE... now it comes out of the primary to the secondary / choke /pump / etc....  this works its way back to your supply ..  and you can put 2 make and breakes in the loop .. should you choose to do so ... 

your load goes on the  primary ..  when you cut you pulse or break the connection in the loop via any means .. your feilds colpase produceing a high voltage spike and a high current spike .. 

and now depending on windeing dirrection .. your coil can fight or work togather ...   if it works togather this is the result ... 

it kicks its self ...  lol  this means  engery flows in your primary ..   round and round .. goes out and squeezes the primary magnetic feild induceing it  useing the magnetic feild your secondary coil produced ..  witch in the JT this in effect is your resistor .. or delay line .. or whatever ..  so you feed back the used engery via magnetic squeez ..  and your secondary is a choke so it lowers the actual power consumed by the device .. but you still USED ALL THE CURRENT TO MAKE THE FEILD IN THE PRIMARY ..  altho the 2 kicks combined and the engery BORROWED is sent out to do do USEFULL WORK ..

regards!

W

[Rosphere]

...
Figure 2 (attached) represents the basic of the Tesla “Electrical Transformer” as described in his U.S. patent # 598,138, awarded in November 2, 1897.
...

Do you mean 593,138?

[giantkiller]

Oddly enough, 598138 could wind coils.

Do you mean 593,138?

[Rosphere]

Oddly enough, 598138 could wind coils.

I noticed that as well.  LOL!