I just received these Youtube links:
OVERUNITY TRANSFORMER - Technologies-Infinity
To:overunitydotcom
youtube.com/user/AlexanderKugushov
Super econom transformer, consumes 0.00 Watt (short)
http://www.youtube.com/watch?v=B1PaDvSNLd8
http://www.youtube.com/watch?v=OuqpQi8GlMk
http://www.youtube.com/watch?v=IG2BHX3o11Q
http://www.youtube.com/watch?v=NH_0faLK1Hc
http://www.youtube.com/watch?v=tknBz_zhN5c
http://www.youtube.com/watch?v=JsxjJa9KRIM
All power station can work from feedback electric.
POWER-INFINITY
Objective: Preservation of the phase shift in the primary winding through a phase shift in the
secondary winding.
Basis: The phase shift is formed where the positive charges are handled by the current magnetic
field south pole TP and vice versa, the negative charges - the north pole.
Solution: The secondary winding is made of two identical coils connected in series (the output
from the output), sm.shemy Fig.1-2.
Result: Since the electric fields obm.5 obm.4 isolates of the magnetic field TP, EDS in obm.4
does not arise, but at the expense of similar poles of MBP. 3-4, directed towards each other, the
magnetic response is absent, the phase shift, as in the MBP. 3-4, and in the entire chain is
present. TR runs at idle under load 100 ... 200%.
The cost of kilowatt / hour = $ 00 + free $ from the purchase of gas, oil, nuclear fuel.
====================================
If anybody could find a website, where he explains it,
please post the address.
I have found his Facebook pages, where he has published the principles:
Have a look at the attached pictures.
Here are his infos:
http://www.facebook.com/kugushov?sk=photos
Seems to be pretty easy to build such an overunity transformer.
Just a transformer with some additional coils , a multivibrator ( ECV or CV in his diagrams)
and a fullwavebridge rectifier for feedback.
If he uses the 50 Hz grid power, you probably only need the right coils with
the right phase relationship.
He seems to be able to extract power from reactive current which does not
register with the active current.
Regards, Stefan.
hartiberlin
THANKS.....
http://freeenergylt.narod2.ru/alexander_kugushov/
He also has pictures of his Russian patents online here:
http://www.facebook.com/media/set/?set=a.134315406657420.36115.100002368843815&type=3
Maybe someone who speaks Russian language can try to find them
online and see, if there is an English version too ?
Maybe also someone can post an English language summary of the
commentary what he talked about in his videos ?
Many thanks.
Regards, Stefan.
He posted here:
http://www.facebook.com/note.php?note_id=113696515385976
Secret of infinity:
1. The Current moves on feedback quicker, than on coil of TR so at the input appears earlier, than on output.
2. TR does not consume the current, so the current this is electronic wind of the molecules of the load, but wind can not have high density.
All much simply: TR = 10...30 A/mm*, Load = 2 A/mm*.
Quote from: hartiberlin on November 13, 2011, 03:10:43 PM
....
Seems to be pretty easy to build such an overunity transformer.
Just a transformer with some additional coils , a multivibrator ( ECV or CV in his diagrams) and a fullwavebridge rectifier for feedback.
.....
Hi Stefan,
He refers to a special wire he calles it super conductor SC, see his Fig. 5 and the text to the right hand side of his Fig.5 at the bottom in the big size picture transformer_principle_02_Alexander_Kugushov.jpg you uploaded above.
Probably this way he insures the very low copper loss, together with the fridge cooling (Fig. 4).
So it does not seem to be easy to replicate at home...
Gyula
Quote from: gyulasun on November 13, 2011, 04:47:58 PM
Hi Stefan,
He refers to a special wire he calles it super conductor SC, see his Fig. 5 and the text to the right hand side of his Fig.5 at the bottom in the big size picture transformer_principle_02_Alexander_Kugushov.jpg you uploaded above.
Probably this way he insures the very low copper loss, together with the fridge cooling (Fig. 4).
So it does not seem to be easy to replicate at home...
Gyula
Did you watch the youtube videos ?
There he is using just a normal transformer in some experiments just with a few extra coils...
Seems to be standard coils...
I guess the big graphic is from an advanced principal with superconducting wire
which seems not to be needed.
Just watch all 6 Youtube videos and you will see,
that he just uses 1 to 3 transformers in his simple setup.
Regards, Stefan.
Look's very good ;D
I wish he'd made a video showing assembly and sizes, maybe we will we get one in the future.
He gave part instructions on how to make Superconductor wire
You can already buy Superconductor wire online
http://www.oxford-instruments.com/products/superconducting-wires/Pages/superconducting-wires.aspx
I started a thread on the material a while ago
http://www.overunity.com/index.php?topic=8976.msg235124#msg235124
Hi,
Here are some patents for this device:
- Patents (http://www.mediafire.com/?5po50ka8lz0io9b)
Hope to be useful.
Quote from: hartiberlin on November 13, 2011, 05:02:10 PM
Did you watch the youtube videos ?
There he is using just a normal transformer in some experiments just with a few extra coils...
Seems to be standard coils...
I guess the big graphic is from an advanced principal with superconducting wire
which seems not to be needed.
Just watch all 6 Youtube videos and you will see,
that he just uses 1 to 3 transformers in his simple setup.
Regards, Stefan.
Well, ok I have watched the videos now and probably the principle may work without special wire.
In this video http://www.youtube.com/watch?v=NH_0faLK1Hc he uses a digital ammeter for the input current and when the transformer is unloaded this current goes up to idle current of 0.8-0.9 Amper and this current reduces to zero or near zero when he switches the lamp load on (and output voltage changes from 37-38V unloaded value to 22V loaded value).
This may show the load causes a phase shift in the primary current to make it close to 90° wrt primary voltage. I wonder how much the phase shift depends on the load.
Gyula
Quote from: gyulasun on November 13, 2011, 04:47:58 PM
Hi Stefan,
He refers to a special wire he calles it super conductor SC, see his Fig. 5 and the text to the right hand side of his Fig.5 at the bottom in the big size picture transformer_principle_02_Alexander_Kugushov.jpg you uploaded above.
Probably this way he insures the very low copper loss, together with the fridge cooling (Fig. 4).
So it does not seem to be easy to replicate at home...
Gyula
special SC wire - strange composition of the magnetic effect ?
1 wire
2 nickel
3 transformer
Hi guys! can someone translate to english this video http://www.youtube.com/watch?v=NH_0faLK1Hc
...so we can understand the guy...
...and maybe also this two
http://www.youtube.com/watch?v=tknBz_zhN5c
http://www.youtube.com/watch?v=JsxjJa9KRIM
Dann
Quote from: hartiberlin on November 13, 2011, 03:10:43 PM
Here are his infos:
http://www.facebook.com/kugushov?sk=photos
SEEMS to be pretty easy to build such an overunity transformer.
JUST a transformer with some additional coils , a multivibrator ( ECV or CV in his diagrams)
and a fullwavebridge rectifier for feedback.
If he uses the 50 Hz grid power, you probably only need the right coils with
the right phase relationship.
He SEEMS to be able to extract power from reactive current which does not
register with the active current.
Regards, Stefan.
Gylasun is right harti and you are waaaaaaaaaaaaay off!
I find it mind blowingly amazing that here is yet another example of where GOOD information has been placed on the internet (what you all pray for)....hell you even have explanations AND schematics and what happens?? READ your own comments above!
You obviously have not even read the material properly and herein lies the reason why 95% of replications fail...PEOPLE SIMPLY MAKE ASSUMPTIONS AND DONT FOLLOW INSTRUCTIONS.
Look at your comments..."SEEMS easy...JUST a transformer...He SEEMS to be able to extract power..."
Assumption after assumption when he has stated very clearly where the power is coming from and HOW you need to accomplish this.
1) These are NOT standard transformers (not all of them...some have to be wound with the nickel copper Super conductive cold rolled wire)
2) What you have obviously missed because you do not know the principle of free energy (and cant READ) is that this device is plagued with HEAT (the same problem as Kapanadze and Steven mark). Have a look at the schematic again and READ IT this time. You will see he has a COOLING element right at the 'friction' point. This is something Steven Mark never did.
3) THEREFORE this CANNOT be EASILY replicated at home. It suffers from what all TRUE OU devices suffer from...HEAT death.
In the youtube videos he hasnt got a cooling element. This is OK for short 20 - 30 minute runs just like the TPU but after that the coils are buggered. So without serious cooling, this is just a novelty.
At least in these 6 Youtube videos it seems pretty easy to run it at
home with no cooling.
I guess this cooling thing is for more powerful devices that use the principle
as selfrunners.
In the youtube videos he is only showing it being still powered by the grid
but with no or very minimal input current.
Also the transformers do not look very complex.
Regards, Stefan.
I got some explanation by Youtube user:
Adrenalinkz
He wrote to me:
I can help you and all the other by some informations which
Alexander gave to his videos but i haven't his plans and schematic.
If i succeed to understand how it work and replicate i will present all of that knowledge to all of people which want to make it.
According to Alexander the goal is to preserve phase shift in a primary winding by creating additional phase shift in a secondary winding. But how to solve this ??
Alexander basic thought is: Phase shift was formed in his transformer when positrons of vortex or fuko currents are processed by South Pole of transformer magnetic field and on the contrary, electrons of vortex - northern pole.of transformer. So for everu closed path we have bi-current fluctations in respect to poles of transformer.
Alexander have said that the Secondary winding is made from two identical windings connected successively (the output of first winding to output of second).Тransformer works in an idle mode under loading 100... 200 %. How we do to achive this mode.
There are 5 windings in the whole transformer.
The electric field (static field??) of winding 5 isolate windind 4 from magnetic field of transformer and back EM pulse wasn't created because there exist two similarly poles (equivalent poles) but not the [same poles] in winding 3 and 4. which have directed towards each other and magnetic reaction of transformer in both windings is absent because the phase shift in windings 3 and 4 and all other windings is present.
PS. this is all what i can tell you for now. The additional experiments maybe will give me some new ideas how this work.
If you can please start a new thread on you OU forum. I want to listen a new suggestions and ideas. You can contact our forum
http://realstrannik.ru/forum/index.html
PS1. this is very misery explanation so i apologize. The lack of informations !!
Quote from: hartiberlin on November 13, 2011, 07:17:00 PM
At least in these 6 Youtube videos it seems pretty easy to run it at
home with no cooling.
I guess this cooling thing is for more powerful devices that use the principle
as selfrunners.
In the youtube videos he is only showing it being still powered by the grid
but with no or very minimal input current.
Also the transformers do not look very complex.
Regards, Stefan.
Why do you allow your eyes to 'tell' you what the evidence is when there is so much more to the picture?? You are still making assumptions!
Just because he has it running at home on his bench for a few minutes barely lighting a 120 watt globe does not mean there is not a heat problem!
I told you...these devices on this principle CAN BE RUN FOR SHORT PERIODS just like the steven mark device without cooling. The more load you place on it the quicker the heat will escalate and there is nothing you can do about that...IT IS SIMPLE PHYSICS!
You see this occur with standard generators and it happens with a FE generator too! Whether you like it or not there is a 'friction ' point in the circuit of a OU device that IS SUBJECT TO LENZS LAW and therefore even though you are not breaking the dipole you are loading the friction point which causes heat death.
I have always stated this....one day the sad irony is that you guys might actually get your shit together and replicate but only then will you realize that it is useless because of the heat issue.
Unless you intend lighting 1 watt globes with each device and keeping the heat down, you dont have to go "commercial" with this for the heat to be a problem. A hair dryer uses 1KW...(or more) and a vacuum cleaner...these will all melt a steven mark/ kapanadze device in 3 minutes flat.
Good luck
Goose, are you saying its OU but useless due to too much heat produced?
You act like this is a problem that cannot be dealt with.
Oh, and it produces abundant amounts of heat, more energy to use.
Go away Goose. Your words are useless.
Mags
I dont see heat death as a problem.
If I could make a free energy generator and it was overheating I'd drop it in an oil bath or distilled water and if needed circulate though a heat exchanger.
After all rossi has heat as an output. If that is the major problem with this then I think we're away laughin. ;D
gsm
hi everyone good day :)
i just want to strenghten an info that heat comes only when there is an OVER LOAD ok!
that means wrong design !
when goose is over cook then expect some coal goose :D lol
Quote from: Magluvin on November 13, 2011, 08:41:36 PM
Goose, are you saying its OU but useless due to too much heat produced?
You act like this is a problem that cannot be dealt with.
Oh, and it produces abundant amounts of heat, more energy to use.
Go away Goose. Your words are useless.
Mags
You seem frustrated and angry Mags. Dont be...calm down.
I only stated the facts after incorrect wild assumptions were made. If you take offense at those facts then that is just foolishness on your part...nothing to do with me.
OBVIOUSLY the heat can be dealt with (duh!)...its all in kugushovs blueprint (which I pointed out!)...a refridgerator at -55C).....hence I laff at the notion of an oil bath.
IF instead of taking offense at the truth which obviously shreds your little hopes and dreams of holding a OU device that is so small it can fit up your ass AND power your house....you were to simply listen to what I said which was "its not a SIMPLE construction that doesnt require cooling" then you would see that nothing is to be lost here.
Read the blueprint...learn from it and improve it.
I can't speak for the rest of you, but I could really use heat to an advantage in this climate! This heat will circulate the refrigerant without a problem. I like the heat exchanger idea also. EG (read this if you want my opinion only) why be so crude? Who is attacking you? We all want the same thing here. If you must be abrasive then log out and introspect until you can find a way to be decent to others. Loving kindness is the true path not destructive cohersion. Harti won't allow destructive crude people to remain and cause intentional mental pain to others. I would tell you to go find a dog to kick, but you just might do that. You display so much uncontrolled anger I question your mental stability. Find someone you trust and figure out why. Good Luck
And to the rest of you Amen on this great news. It is to new for me to determine if it is valid as of now, but it has my attention!
The information provided is only useful to someone with good skills in electronics and construction,
lots of filling in the blanks is required. (Those following Kapanadze thread will understand this)
For the rest of us with basic skills we we can only hope that some one will be successful with a replication so that we can follow in their footsteps.
It seems strange that he wants to show a working device to the world but he doesn't give full details,
despite having plenty of media available to him........Time will tell.
Quote http://www.economist.com/node/691254
Superconductivityâ€"the ability of a material to conduct electricity without losses due to resistanceâ€"has been known about for 90 years. For the first 75 years, though, its applications were restricted by the fact that it seemed possible only within 23 degrees of absolute zero (23K). In 1986, however, a ceramic material that superconducted at 36K was discovered. That led to a rush to find similar materials that would superconduct at even higher temperatures. Now, several are known that do so above 77K, the boiling-point of nitrogen. That means they can be cooled with liquid nitrogenâ€"and liquid nitrogen is cheap.
Even so, the longed-for boom in applications did not happen. Because high-temperature superconductors, as these materials are known, are ceramics, they are brittle and difficult to draw into wires. That has limited their use. But American Superconductor, a firm based in Westborough, Massachusetts, has persevered. By grinding the material up, packing it into silver tubes, rolling the tubes into tapes, heating the tapes up, and then rolling and heating again and again, its engineers have produced wires long enough to be useful as superconducting cables.
http://www.economist.com/node/691254
Superconducting Wire is more available now than ever, difficulty in finding prices as most manufacturers want you to contact them first to discuss your requirements.
here's a Google search link
http://www.google.co.uk/#sclient=psy-ab&hl=en&source=hp&q=superconducting+wire+for+sale&pbx=1&oq=superconducting+wire+&aq=3&aqi=g4&aql=&gs_sm=c&gs_upl=0l0l1l696l0l0l0l0l0l0l0l0ll0l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=a9c2f2b04d44c7c3&biw=1280&bih=656
I think this company is good for small quantities
http://www.superpower-inc.com/content/technology
How do we know that this device draws less power than it outputs?
Where does the inventor measure the in/out power ? I cannot see it in any of the videos.
Whoa, good job, but like so many FE idea before: lack of infos for replication and need some special Super Conductor wire... nor easy for isolated replicator in his home...
Without the exact detailled plan, this device will turn out like SM's TPU: urban legend which nobody can replicate and made hundreds of page of speculation around it... Sad...
If the inventor go greedy: then lack of infos -> dead locked patent and condition -> suppression then another FE device lost...
@Stephan: I love your new forum design !!!
Just an idea that spark in my mind now: (Yeah it's speculation but worth to share...)
1) Imagine a trafo like the toroidal in the pictures page 1 of this topic...
2) Imagine that the blue thing is Superconductor...
3) Imagine the black thing is normal conductor... (Copper for example)
4) Do you know Meissner effect in SC and perfect diamagnetism ?
5) Do you know that diamagnetism is the ability to repel any field from the material itself !?
6) SC primary induce EMF in normal secondary (cut the windings of secondary) OK !!!
7) On load secondary induce BEMF against SC primary, but no chance Mister Lenz can't cut the SC wire of primary (perfect diamagnetism keep the gate !!!) and build around...
8 ) Is the SC and perfect diamagnetism (Meissner effect) is key to have a LENZLESS trafo !?
9) The SC primary act as a shield against the BEMF (look like Tesla patent 433702 Gabriel device) with it's shield effect...
SRM.
Guys, come on... When in the past heat was an issue for almost any electronic device???? Instead of listening to this, try to focus on one thing: We have a new device here, which needs to be replicated. So, grab that bloody oscilloscope and start measuring! :) THIS is the way to treat new inventions, not come up with some "impossible" situations. So, make, measure, share and I will do the same of course...This is my advice in order for us to have one day a device which is simple, works and anybody will be able to replicate in the end!
When I read the info on his website about the special wire, the description seems to speak of a new type of
wire that is not totally a superconductor, but has some resistance. 0.0012mkOhm*m at 100 Tesla.
It also seems to mention that the combination of copper coated with nickel produces a cooling effect with current flow.
This is similar to those semi conductor coolers.
So the wire cools itself to very low temperatures while current is flowing through it.
So it super cools itself.
I may be reading things wrong: http://freeenergylt.narod2.ru/alexander_kugushov/
But I would sure like to know were he got that wire from, sounds awesome for many things.
Copper with 1 micron nickel SUPER CONUCTOR WIRE up to 100° ... 1000°
on the other side copper-nickel alloy is a PERFECT RESISTANCE WIRE -I.E. COSTANTAN
http://www.nickel-alloys.net/copper_nickel_alloys.html
@Abba The refrigerant is the cooling agent causing the cooling not the SC wire. It is his solution to heat build up. It is not a show stopper, just a bit of information and his solution. Is this the same format as the UK OverUnity group Stefan? Looks familiar anyways. I like it too. Thank you
@Hope
I'm trying to understand what he means by this statement:
Result: The temperature 0...-55*C is formed inside the wire, not outside, that is cooled by the current itself, not the conductor current.
I do see dia. 4 on the cooling system.
@ AbbaRue: So it's a negative resistance ? when current flow into it, the wire coil itself (draw energy from ambient ?) winding the primary of a trafo will tun it into negative resistor ? so he can extract power without reflecting to the source ?
I believe it is a translation error or I am not correct. But if it cools itself then why the need for the cooling circuit. AND I agree that his statement reads the way you described it.
This statement on negative current is relevant to a discussion at least. To me it involves why we can't measure nor even sense it. My feeling (and I have NO WAY of proving it) is that it the other half of the cycle of current travels in a negative time line than what we do. In this way a complete balance is achieved. Also we must take into account particles of atoms reactant but not seen. They must be allowed to balance totally in that they move in a TOTALLY negative manner which also mean they create this cold current. While expansive currents byproduct is heat, contractible current we will sense are causing cooling. We can get this effect by making one conductor within another that are of different resistive natures. This causes a lag of one current type over another, be it the negative or positive current. It isn't really holes being filled it is repulsion/attraction as we can see in magnets.
Richard
Hey guys, what about contacting the inventor and ask him some questions? ...like... what materials did he use in his youtube videos and maybe how would one go about replicating that?
...and of course invite the inventor in this thread (if he speaks english)...
Is there someone willing to do that (that speaks russian)?
Dann
Hi all,
On first page of this topic I posted patents of devices invented by Alexander Kugushov. There is someone who can translate in english these patents?
Thanks,
SaDAng
Quote from: sadang on November 16, 2011, 03:26:26 PM
Hi all,
On first page of this topic I posted patents of devices invented by Alexander Kugushov. There is someone who can translate in english these patents?
Thanks,
SaDAng
To exactly translate a complicated text like in those patents, you need a native ukrainian speaker.
It's too different from russian. So hopefully there is ukrainian comrade here, who can help.
He seems to work with freezing agents if i got that part right.
Good enough translation?
here is the rest of them
maybe this is related, i don't know
it says semiconductors give of electrons then take of electrons at certain magnetic frequency.
the electrons start to rotate in magnetic field
http://www.youtube.com/watch?v=Cdr89n_nf9Y&feature=channel_video_title (http://www.youtube.com/watch?v=Cdr89n_nf9Y&feature=channel_video_title)
i guess maybe the copper nickel wound wire is a large semiconductor, and it has resonance in magnetic field, at certain frequency.
Here:
http://realstrannik.ru/forum/19-svobodnaya-energiya/30903-proshhaj-gorelektroset.html?limit=18&start=36 (http://realstrannik.ru/forum/19-svobodnaya-energiya/30903-proshhaj-gorelektroset.html?limit=18&start=36)
one russian men say ÐЕ Ð"ЕЙСТÐ'УЕТ /not working/. He make test and say that.
Quote from: hacko on November 20, 2011, 03:38:39 PM
Here:
http://realstrannik.ru/forum/19-svobodnaya-energiya/30903-proshhaj-gorelektroset.html?limit=18&start=36 (http://realstrannik.ru/forum/19-svobodnaya-energiya/30903-proshhaj-gorelektroset.html?limit=18&start=36)
one russian men say ÐЕ Ð"ЕЙСТÐ'УЕТ /not working/. He make test and say that.
That's not I read there. I believe what was being discussed was the legal validity and current status of the patents.
New video:
40%-50% economy
http://www.youtube.com/watch?v=fQK_FRTqmHc (http://www.youtube.com/watch?v=fQK_FRTqmHc)
Quote from: hacko on November 21, 2011, 11:07:11 AM
New video:
40%-50% economy
http://www.youtube.com/watch?v=fQK_FRTqmHc (http://www.youtube.com/watch?v=fQK_FRTqmHc)
At the output with 1 lamp:
12.5 Volts x 1.68 amps= 21 Watts
and at the input:
220 Volts x 0.05 amps= 11 Watts,
so COP=1.9 so big overunity !
;)
Great ! Well done !
Best regards, Stefan.
Quote from: hartiberlin on November 21, 2011, 07:21:44 PM
At the output with 1 lamp:
12.5 Volts x 1.68 amps= 21 Watts
and at the input:
220 Volts x 0.05 amps= 11 Watts,
so COP=1.9 so big overunity !
;)
Great ! Well done !
Best regards, Stefan.
Stefan, if you recall on the previous vid when he disconnects the load on the secondary's, the primary current rises. Yes?. Well, in this vid,
somtehing is different.
@3:08 he moves the camera and zooms in. You can no longer see the bulb or reflected light from it.
@3:19 you hear "click" and the current climbs to .11A. You assume the bulb has been switched off. Yes?
@3:44 he zooms out. The current is still .11A. But guess what... The bulb is still lit.
'Something is rotten in the state of Denmark', William Shakespeare
or in Ukraine in this case.
By the way with the forum upgrade, I cant get spell check to self correct and right click paste wont work either. have to ctrl. v
Quote from: hartiberlin on November 21, 2011, 07:21:44 PM
At the output with 1 lamp:
12.5 Volts x 1.68 amps= 21 Watts
and at the input:
220 Volts x 0.05 amps= 11 Watts,
so COP=1.9 so big overunity !
;)
Great ! Well done !
Best regards, Stefan.
Stefan, if you recall on the previous vid when he disconnects the load on the secondary's, the primary current rises. Yes?. Well, in this vid,
something is different.
@3:08 he moves the camera and zooms in. You can no longer see the bulb or reflected light from it.
@3:19 you hear "click" and the current climbs to .11A. You assume the bulb has been switched off. Yes?
@3:44 he zooms out. The current is still .11A. But guess what... The bulb is still lit.
'Something is rotten in the state of Denmark', William Shakespeare
or in Ukraine in this case.
By the way with the forum upgrade, I cant get spell check to self correct and right click paste wont work either. have to ctrl. v
Sorry for the double post the reply page crashed and I thought it didn't post
Hi,
There is two bulbs connected to the transformer. The first light bulb has no on/off switch.
The second light bulb has a on/off switch. The last video frame shows the unit with
the second bulb switched on. Thus, the input current has gone up to 0,11 Amp.
GL.
Quote from: Groundloop on November 22, 2011, 12:01:54 AM
Hi,
There is two bulbs connected to the transformer. The first light bulb has no on/off switch.
The second light bulb has a on/off switch. The last video frame shows the unit with
the second bulb switched on. Thus, the input current has gone up to 0,11 Amp.
GL.
MY BAD, SO SORRY. :'( :'( :'( He should have left the camera alone. I thought was the same setup as last vid. Or did I see that one wrong as well?
A replication attempt from User cikljamas (http://www.energeticforum.com/members/cikljamas.html) at energetic forum
From here
http://www.energeticforum.com/renewable-energy/9781-tigers-device-0-150-1kwt-replicant-7.html#post168268 (http://www.energeticforum.com/renewable-energy/9781-tigers-device-0-150-1kwt-replicant-7.html#post168268)
Quote:
Let me amuse you with my new video (http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be) inspired with Alexandar Kugushov video and also with one Duncans earlier in this thread linked video...
Maybe there would be some good and educational comments on this video, especially in a sense of already put question in my earlier post: how to wound transformer to achieve Alexanders result?
Or which combination of (in stores available) transformers we could use to get closer to Alexanders result?
My video is just demonstration of working principle, i am not claiming no claims, and there is no reason for that also, but there is hope to make much, much better results...
And bonus manifestation of this vid are blue rays, notice that when i disconnect third of four cfl bulbs (i disconnect them one by one), manifestation of blue rays phenomena stops, and when i again became to connect cfl bulbs which i disconnected in my previous steps, blue rays start to be noticeable again...
Enjoy...
P.S. As in most of my vids in this vid too there is at least one funny moment when at the end of the vid i failed to connect last (forth) bulb and then i expeled one famous croatian curse (**** hitler), that is why this video i was called by that name
at energetic
http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be (http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be)
-------------------------------------
Chet
Quote from: ramset on November 22, 2011, 06:08:07 PM
A replication attempt from User cikljamas (http://www.energeticforum.com/members/cikljamas.html) at energetic forum
From here
http://www.energeticforum.com/renewable-energy/9781-tigers-device-0-150-1kwt-replicant-7.html#post168268 (http://www.energeticforum.com/renewable-energy/9781-tigers-device-0-150-1kwt-replicant-7.html#post168268)
Quote:
Let me amuse you with my new video (http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be) inspired with Alexandar Kugushov video and also with one Duncans earlier in this thread linked video...
Maybe there would be some good and educational comments on this video, especially in a sense of already put question in my earlier post: how to wound transformer to achieve Alexanders result?
Or which combination of (in stores available) transformers we could use to get closer to Alexanders result?
My video is just demonstration of working principle, i am not claiming no claims, and there is no reason for that also, but there is hope to make much, much better results...
And bonus manifestation of this vid are blue rays, notice that when i disconnect third of four cfl bulbs (i disconnect them one by one), manifestation of blue rays phenomena stops, and when i again became to connect cfl bulbs which i disconnected in my previous steps, blue rays start to be noticeable again...
Enjoy...
P.S. As in most of my vids in this vid too there is at least one funny moment when at the end of the vid i failed to connect last (forth) bulb and then i expeled one famous croatian curse (**** hitler), that is why this video i was called by that name
at energetic
http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be (http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be)
-------------------------------------
Chet
Thanks Chet,LMAO (**** hitler)
Quote from: ramset on November 22, 2011, 06:08:07 PM
http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be (http://www.youtube.com/watch?v=ursbfVWj_C0&feature=youtu.be)
-------------------------------------
Chet
Hmm ??
Please post a circuit diagram. It is very confusing what you are doing there,
Many thanks in advance.
Regards, Stefan.
From here
http://www.energeticforum.com/renewable-energy/9781-tigers-device-0-150-1kwt-replicant-8.html#post168442 (http://www.energeticforum.com/renewable-energy/9781-tigers-device-0-150-1kwt-replicant-8.html#post168442)
cikljam (http://www.energeticforum.com/members/cikljamas.html)as
Quote:
circuit + bonus circuit
Hi guys!
I was busy today, so i couldn't see until now your requests for my schematic, and i have worked today on one another super schematic and now i can share with you both schematics :
First one (http://imageshack.us/photo/my-images/16/fantasticledtorchcircui.jpg/) (you can use it if you want fantastic brightness out from led torch for the minimum current cost 120-220 mAmps...)
Second one (http://imageshack.us/photo/my-images/5/cikljamaperimentcirc.jpg/) (schematic that you asked me for)
Cheers!
second pic is down so could someone repost?
Quote from: prato_braun on November 24, 2011, 05:17:38 PM
second pic is down so could someone repost?
Is this it? "****hitler"
Does anyone know more about these Superconductor cables? I see that the key in his TR is the Superconductor wire. Without this wire is ordinary TR. I think this SC will be very expensive and dificult to find in the shops.
After looking at the videos and transformer design, the examples shown are not the 'preferred embodiment' shown in the patents - they just demonstrate the effect.
The larger transformer, that according to the translation was made by one of Alexander's students, appears to consist of 8 C cores (ferrite?) with the windings on a long bobbin (2 x C Cores on either side) and the other C cores in the middle, with an air gap in between as a consequence of a wide enough bobbin.
The flat magnetic/diamagnetic plate shown in the diagram is probably not used on the basis he demonstrates a sample plate by inserting it in between the cores - if it already had one presumably their would not be a gap to place another.
The windings traverse between the left and right C core pairs with the remaining C cores in the middle (i.e a single long bobbin is used). The secondary winding (~12VAC output) is either wound as the inner layer (yellow color in diagram) or as the outer layer (brown/orange color in diagram). The primary winding (~224VAC (Russian mains)) would obviously have more windings. The windings are opposed based on the translation given.
I don't see any rectification components in the video and the DM is set to AC when measuring the output voltage.
I am thinking of attempting to replicate this device using the Met-glass amorphous C cores and the simple LaserSaber Joule Thief circuit (i.e 12VDC input, 2N3055 transistor, CFL bulb on output). I would swap the primary with the secondary for higher voltage on the output.
Quote from: hacko on December 10, 2011, 12:32:36 PM
Does anyone know more about these Superconductor cables? I see that the key in his TR is the Superconductor wire. Without this wire is ordinary TR. I think this SC will be very expensive and dificult to find in the shops.
http://www.youtube.com/watch?v=jxDVbj_IfpU (http://www.youtube.com/watch?v=jxDVbj_IfpU)
http://www.youtube.com/watch?v=GHBe9EG1xBA (http://www.youtube.com/watch?v=GHBe9EG1xBA)
Here is explanation on most of your questions
Wesley
what is happening in these transformer setups is resonance
Wiz
I do trust all of the ideas you’ve introduced on your post. They’re very convincing and can certainly work. Nonetheless, the posts are too brief for starters. May just you please lengthen them a little from subsequent time? Thank you for the post.
wedding dresses (http://www.vicyc.com/wedding-dresses-c-19.html)|bridesmaid dresses (http://www.vicyc.com/bridesmaid-dresses-c-59.html)
Quote from: NTesla on June 02, 2012, 07:32:35 PM
After looking at the videos and transformer design, the examples shown are not the 'preferred embodiment' shown in the patents - they just demonstrate the effect.
The larger transformer, that according to the translation was made by one of Alexander's students, appears to consist of 8 C cores (ferrite?) with the windings on a long bobbin (2 x C Cores on either side) and the other C cores in the middle, with an air gap in between as a consequence of a wide enough bobbin.
The flat magnetic/diamagnetic plate shown in the diagram is probably not used on the basis he demonstrates a sample plate by inserting it in between the cores - if it already had one presumably their would not be a gap to place another.
The windings traverse between the left and right C core pairs with the remaining C cores in the middle (i.e a single long bobbin is used). The secondary winding (~12VAC output) is either wound as the inner layer (yellow color in diagram) or as the outer layer (brown/orange color in diagram). The primary winding (~224VAC (Russian mains)) would obviously have more windings. The windings are opposed based on the translation given.
I don't see any rectification components in the video and the DM is set to AC when measuring the output voltage.
I am thinking of attempting to replicate this device using the Met-glass amorphous C cores and the simple LaserSaber Joule Thief circuit (i.e 12VDC input, 2N3055 transistor, CFL bulb on output). I would swap the primary with the secondary for higher voltage on the output.
Does your oscillator produce sine wave ? If so, then maybe you could try this much simpler setup:
http://www.overunity.com/12487/simple-to-build-isolation-transformer-that-consumes-less-power-than-it-gives-out (http://www.overunity.com/12487/simple-to-build-isolation-transformer-that-consumes-less-power-than-it-gives-out)
It is high impedance resonant trafo where output does not affect input. So far I have tested it successfully with 50 Hz sine signal and I am stuck to that frequency. Would like to see how it would work at high frequency. In my head output power should increase with frequency while input power remains as is.
The fact you may be able to create an equalibrium of voltage leaving the secondary+ set of windings, the current is dramatically reduced by both the "step Up" process and the natural resistance from the length and guage of the windings, the amount of current produced by the secondary+ windings is not enough to create a transformer that can produce a true "0 OHMs" transformer, nor "0 Watts" as you put it, even an isolation type transformer and not even a step type.
J.
Question, Based on a coment of yours "All power station can work from feedback electric." my work objective was always 'To have each house, RV, car whatever to produce it's own energy' why would you want to create a means of reducing the big company's "cost of production" by 90%+" do you honestly think they would lower the charges on the consumer ???
J.
Did anyone look at this movie: https://www.youtube.com/watch?v=AwvmkOKE0xE ? (15:32 minutes and onward)
Of course, again the language barrier is there.
How ever, he is telling us about a test he was going to perform. If the supercaps would have been there.
He draws a schematic, like 4 times a capacitor with a zener diode on it. He says that suppose the discharge takes 1 second and charging takes 3 seconds, then with 4 diodes? I think he is going to say overunity. he also explains about a transistor switching the supercaps on and off.
If you would put a (high) voltage on the anode of the zener diode, the zener would take out a specific voltage, and let the rest of the voltage (current) go to the supercap. And the other way around, to tap energy from the supercap is easy, since the zenerdiode will act as a normal diode in forward usage.
Did anyone think about what he was going to say? He drew a transformer in the schematic as well (with two more diodes). Perhaps he wants to discharge a capacitor (in 1 second) by pulsing it to the transfomer, and .. .. uhm. What next? The transformer could output power back to charge the other 3 supercaps. He does say the word phase as he draws a piece of the transformer. he also shows a small graph with output voltages. I am not sure if it is a voltage in the transformer or from one of the capacitors. The graph does end with an arrow pointing to the 2.2 (discharge) seconds (which he later on changes to 3 seconds).
Any how, I have no idea, but that is what a forum is for. If everyone does some suggestions we might figure it out. And if there are no special devices or wires needed, we can easily replicate the idea.