MetaQEG- An invitation to TheoriaApophasis to a cooperative build.
I have an idea based upon Tom Beardens overunity circuit with my additional gravity concepts added to his circuit, using 40 years of research notes and information gleaned from 39,500+ books of every subject and discipline. My input may give you information you may have never heard of even with your experience using measuring equipment. I am fluent and cognizant in all of physics and metaphysics.
The MetaQEG deliberately bypasses all (e) electric, (m) magnetic and backEMF problems using the counterwound coils and accesses the third force, gravity, which is not in the 3rd dimension.
Im giving you, TheoriaApophasis, permission to work with this MetaQEG PDF (pages 1-3) and build a circuit according to its design and with my additional, ongoing input, all documented here on this thread for all to see, so we have a record.
I cannot build seeing I have no measuring equipment nor a home that allows such projects. You will be building it with my permission and I will be the holder of the copyright of the written posts and pdf material. We will share equally, any prize monies from OverUnity.com resulting from your successful building of the MetaQEG and it will give you a chance to claim the MetaQEG does not work, if you fail to build three working models, two of which shall be delivered to J. Naudin for testing according to OverUnity.com policy and protocol.
The two coils are caduceus coils and you will have no major problem in construction of them, on 2 rings of 8 inch diameter styrofoam, 1 1/2 inch thick. You can get about 4 turns on this core on one go around, keeping all dual windings at 90 degree crossings. Use as much wire windings as you wish to.
Remember, to criticize, before through research, is the height of stupidity.
You should click on the link below to send TheoriaApophasis a personal message so you can be sure that he receives your invitation:
http://overunity.com/pm/theoriaapophasis.102135/sa/send/
This should be a hoot :D
Quote from: tinman on April 08, 2016, 12:28:32 PM
This should be a hoot :D
I have listed a few meanings, wich one is the one used 'down under' so to speak ?
1 A low, wavering musical sound which is the typical call of many kinds of owl.
Example sentences Synonyms
2 A.raucous sound made by a horn, siren, or steam whistle.
Example sentences Synonyms
3 A shout expressing scorn or disapproval: there were hoots of derision
More example sentences Synonyms
4 A short outburst of laughter: the audience broke into hoots of laughter
regards AG
Quote from: AlienGrey on April 08, 2016, 05:16:18 PM
I have listed a few meanings, wich one is the one used 'down under' so to speak ?
1 A low, wavering musical sound which is the typical call of many kinds of owl.
Example sentences Synonyms
2 A.raucous sound made by a horn, siren, or steam whistle.
Example sentences Synonyms
3 A shout expressing scorn or disapproval: there were hoots of derision
More example sentences Synonyms
4 A short outburst of laughter: the audience broke into hoots of laughter
regards AG
5- Hootananny- A fun party with lots of drinking involved. My vote is for number 5. We have a lot of those here in Kentucky. Hoot is short for hootananny.
Bill
Quote from: Pirate88179 on April 08, 2016, 06:19:04 PM
5- Hootananny- A fun party with lots of drinking involved. My vote is for number 5. We have a lot of those here in Kentucky. Hoot is short for hootananny.
Bill
Well, Bill, I like your definition and have been known to participate in such social activities.
However, as a past or present inhabitant of Alabama, Tennessee, Florida, Mississippi, and, Louisiana, I have never resided in Kentucky. I have never, as I ponder the matter now, ever actually been in the state. But they tell me it is very nice there.
Not being a great admirer of formalities, I have developed my own personal definition of "hoot" based on my own personal life experiences among the people who have have been my neighbors and acquaintances and such like. It means to me an unexpected event that gives me a sense of humour, a feeling of happiness, that a kind of oppressive situation has been reversed and so the previous victim has surprisingly become the victor and is now in a comfortable condition.
And it can mean to me that someone has set out to be a predator and has been surprised to find that the tables have turned and the wannabe predator has become the stalked prey.
In this particular situation, I find it to be a hoot because TA has claimed to be comfortable financially without needing a relatively small increase in pay as the half of the prize would be. So I see the inventor as presenting a bait that the would be prey won't even sniff at.
But, it is obvious that TA has a prodigious amount of creative mind, and, free will, and so I am not presumptuous as to whether TA will see value in either accepting or rejecting the offer.
CANGAS 229
Quote from: Meta on April 08, 2016, 08:19:55 AM
MetaQEG- An invitation to TheoriaApophasis to a cooperative build.
I have an idea based upon Tom Beardens overunity circuit with my additional gravity concepts added to his circuit, using 40 years of research notes and information gleaned from 39,500+ books of every subject and discipline. My input may give you information you may have never heard of even with your experience using measuring equipment. I am fluent and cognizant in all of physics and metaphysics.
The MetaQEG deliberately bypasses all (e) electric, (m) magnetic and backEMF problems using the counterwound coils and accesses the third force, gravity, which is not in the 3rd dimension.
Im giving you, TheoriaApophasis, permission to work with this MetaQEG PDF (pages 1-3) and build a circuit according to its design and with my additional, ongoing input, all documented here on this thread for all to see, so we have a record.
I cannot build seeing I have no measuring equipment nor a home that allows such projects. You will be building it with my permission and I will be the holder of the copyright of the written posts and pdf material. We will share equally, any prize monies from OverUnity.com resulting from your successful building of the MetaQEG and it will give you a chance to claim the MetaQEG does not work, if you fail to build three working models, two of which shall be delivered to J. Naudin for testing according to OverUnity.com policy and protocol.
The two coils are caduceus coils and you will have no major problem in construction of them, on 2 rings of 8 inch diameter styrofoam, 1 1/2 inch thick. You can get about 4 turns on this core on one go around, keeping all dual windings at 90 degree crossings. Use as much wire windings as you wish to.
Remember, to criticize, before thorough research, is the height of stupidity.
He invented a chair so, this is probably just what he will work on next.
Bill
"Remember, to criticize, before thorough research, is the height of stupidity." It actually isn't the height of stupidity; that honour belongs to doing the exact same thing over and over again, while expecting different results.
Quote from: memoryman on April 10, 2016, 07:35:52 PM
"Remember, to criticize, before thorough research, is the height of stupidity." It actually isn't the height of stupidity; that honour belongs to doing the exact same thing over and over again, while expecting different results.
You know what really pains me? Watching you buffoons tweak your one sided circuits over and over again, never learning but expecting some different result, other than failure.
That coming from someone who does not build himself is both sad and funny.
Quote from: memoryman on April 11, 2016, 11:07:04 AM
That coming from someone who does not build himself is both sad and funny.
Consider the waste of time and resources you've accumulated over the years, trying the same dam thing over and over compared to my thinking it through and then putting it on paper, knowing it will work. I wonder why your company hired you.
My company hired me because I own it.
You, in all likelyhood, thought through an impossibility, which you refuse to demonstrate. Every person who fails has great reasons for their failures and it's never them.
META , you need to change .
can you see how you act and react to people ? you corner your self and abuse complete strangers even if they havent done anything to you
39,500 books equates to nothing if over 40 years you havent applied your self , most people only need a few books and they hit the ground running
be Practical or be dead , thats the final act , no one gets out alive !
contact Tom Bearden directly and see if he has anytime for you
http://cheniere.org/sales/buy-starwarsnow.htm
all the best
Quote from: memoryman on April 11, 2016, 02:17:58 PM
My company hired me because I own it.
You, in all likelyhood, thought through an impossibility, which you refuse to demonstrate. Every person who fails has great reasons for their failures and it's never them.
A self employed, self made failure.
Im very impressed.
I shall listen carefully to your every word, and avoid repeating it.
Quote from: Meta on April 13, 2016, 01:41:04 PM
A self employed, self made failure.
Im very impressed.
I shall listen carefully to your every word, and avoid repeating it.
You know...if you keep making postings like this, it will not endear you to your fellow man.
Bill
Bill, all Meta has is nasty comments. There is no merit in anything else he has posted. I just let it slide.
I started a thread about people like Meta. It is called "How to deal with people that add nothing to the forum". I don't know how to post a link to it into this thread. I tried copying the link but that didn't seem to work. Maybe someone else can do that. But the gist of the thread is it is best just to ignore them and maybe they will go away. If you don't even waste time looking at their posts they will realize they have no audience.
Just a suggestion.
Carroll
Hey predators,
Fresh meat to tear into. Heres that buffoon you know and love to rip apart, Jamie Robitaille and his latest buffoonery on the QEG, according to you. Please give us your latest corrections of all his mathematics, proceedures and theories, sometimes even before he invents them, seeing you are so good at doing that before you even try it yourself, which amazes me, no end.
QEG Tuning Procedure Increase the Power!
https://www.youtube.com/watch?v=zq_i0mk0pRk (https://www.youtube.com/watch?v=zq_i0mk0pRk)
And to the little politically correct, third worlder who is harassing me on my own thread....why dont you get your ass off my thread if you dont like the way I deal with you buffoons? Hum?
Quote from: Pirate88179 on April 13, 2016, 02:31:00 PM
You know...if you keep making postings like this, it will not endear you to your fellow man.
Bill
You started the personal attacks, assholes, instead of doing what you're told. I have no problems wiping the forum up, using your face.
Quote from: Meta on April 13, 2016, 04:23:29 PM
You started the personal attacks, assholes, instead of doing what you're told. I have no problems wiping the forum up, using your face.
Lucky for you that you are over there, and not over here as someone like you hasn't the balls to say that to someone's face in person...everyone here knows that. It has been proven and is now a scientific fact.
Do you like getting banned from forums? Is this like a hobby for you?
Bill
PS I have attacked no one but, I am willing to learn.
Learn this,
Jamie is now dealing with a bi-toroidal transformer he added to the QEG, to convert VARS using the bi-toroid transformer. Bi means 2,
Do you remember me telling you "it takes two baby".
Jamie is now measuring RF in his QEG with a RF meter and is capturing RF, radio frequency on his...RADIO...radiant energy of Tesla and Morin, as I told you.....
Jamie is also using music and harmonics, which I also told you was necessary.
But you didnt listen.
Is there a piano tuner among you?
Jamie is also using a frequency generator to input a low frequency to get a high frequency...Did you not pay attention to Gerrard Morin when he said, "you must have some input, before you get an output".....did you listen?
Dont ever accuse me of giving you nothing, harrassser.
Did you just imagine I was talkin shit when I told you these things?
It was your ears that did not hear, not my instructions, that was the problem.
Are you talking about Gerard the Moron? Or Jamie, who doesn't know Vars from his arse?
If you think that either has a clue about electricity, then you better see a good psychiatrist.
memoryman,
Open the video
QEG Tuning Procedure Increase the Power!
https://www.youtube.com/watch?v=zq_i0mk0pRk (https://www.youtube.com/watch?v=zq_i0mk0pRk)
and please give us your critique of what Jamie is doing wrong, big mouth. He just tuned his machine, introduced a third harmonic and boosted the voltage.
We're waitinggg.
I noticed that he has NOT demonstrated OU, in spite of claiming 2 years ago that they had. I charge US$100/hr plus expenses for my services. Are you willing to pay that?
Quote from: Meta on April 14, 2016, 01:24:35 AM
memoryman,
Open the video
QEG Tuning Procedure Increase the Power!
https://www.youtube.com/watch?v=zq_i0mk0pRk (https://www.youtube.com/watch?v=zq_i0mk0pRk)
and please give us your critique of what Jamie is doing wrong, big mouth. He just tuned his machine, introduced a third harmonic and boosted the voltage.
We're waitinggg.
Ummm...voltage is NOT power. Both you and Jamie need to take a remedial electronics course.
Bill
Quote from: Pirate88179 on April 14, 2016, 10:45:54 AM
Ummm...voltage is NOT power. Both you and Jamie need to take a remedial electronics course.
Bill
I never said voltage is not power.....I said....Jamie boosted the voltage. You put imaginary words in my mouth....you may be delusional.
Bill, "Both you and Jamie need to take a remedial electronics course." What makes you think that either EVER took an basic course in electricity?
Quote from: Meta on April 14, 2016, 11:58:16 AM
I never said voltage is not power.....I said....Jamie boosted the voltage. You put imaginary words in my mouth....you may be delusional.
You clearly posted a link claiming that Jamie boosted the power and then you said that he shows how to boost the voltage. I even quoted you saying this...yet, now you claim you did not say this? Is someone else typing your responses here or something? Has your account been hacked and others are making postings for you? You should probably report this then.
Bill
Quote from: memoryman on April 14, 2016, 12:03:29 PM
Bill, "Both you and Jamie need to take a remedial electronics course." What makes you think that either EVER took an basic course in electricity?
What makes you think that they have to take a basic course in lies. Government subsudized schools and classes have the worst reputation for excising Maxwells 240 quaternions to 4, used daily in electrodynamics, done by Heaviside, some say and other say by Lorentz....who knows...the point is all you've learned in a modern basic course in electricity is bullshit...that leads to failure, which you buffons seem to be good at. We know better than to subject ourselves to State whores paid to teach lies, or to buffoons who learned and repeat them.
Quote from: Meta on April 14, 2016, 01:24:35 AM
memoryman,
Open the video
QEG Tuning Procedure Increase the Power!
https://www.youtube.com/watch?v=zq_i0mk0pRk (https://www.youtube.com/watch?v=zq_i0mk0pRk)
and please give us your critique of what Jamie is doing wrong, big mouth. He just tuned his machine, introduced a third harmonic and boosted the voltage.
We're waitinggg.
See?
Here is your quote yet again. I wonder who might have made this post if it was not you? It sure looks like you made this post.
Bill
Quote from: Pirate88179 on April 14, 2016, 02:25:22 PM
You clearly posted a link claiming that Jamie boosted the power and then you said that he shows how to boost the voltage. I even quoted you saying this...yet, now you claim you did not say this? Is someone else typing your responses here or something? Has your account been hacked and others are making postings for you? You should probably report this then.
Bill
Lets try to keep up with the present conversation, ok? I learned, last time, from what you said....however, I dont believe you know what the hell you're talking about when you use the words voltage and power....you are taught by the liars of the Heaviside or Lorentz traditions wherein one of them excised Maxwells 240 quaternions to 4...severely limiting what you understand as power....you know very little of Maxwells spatial power and the schools certainly will not teach it to you....you can only find out about thru people like me or on your own and you havent done the work to find it and you are certainly not worth $100/hour for what you know.
How fascinating (and wrong). We buffoons use this 'nonsense taught by whores' to design real products that are used by real people ndaily.
Have you ever designed anything that is used and works using your ideas? I highly doubt it; it's just talk.
Quote from: memoryman on April 14, 2016, 06:02:38 PM
How fascinating (and wrong). We buffoons use this 'nonsense taught by whores' to design real products that are used by real people daily.
Have you ever designed anything that is used and works using your ideas? I highly doubt it; it's just talk.
You are a most persistant, dirty, little exploiter arent you. Doin everything you can possibly think of to cause damage. We call people like you State Whores.
I designed a sonic levitating machine and several clustered-sphere machines that play with space, time and spacetime, but its just talk for now.
Your time is up, you're wasting mine..Get the fuck off my thread.
You owe me money. I charge $500/hour for my time. Pay up.
You can charge what you want, but no sane person would pay you anything; I get paid what I charge and have happy customers. Levitate yourself back to where you came from: Can'tSpell .
You forget this is MY thread, shitstain.
Get your predatory, capitalist ass off of it.
Ha ha ha. As explained (to no avail). YOU DON'T OWN THIS THREAD. You don't own much at all; least of all a thinking brain. Don't worry, they can do a brain transplant from any animal to you; it can only be an improvement.
Quote from: memoryman on April 14, 2016, 10:04:14 AM
I noticed that he has NOT demonstrated OU, in spite of claiming 2 years ago that they had. I charge US$100/hr plus expenses for my services. Are you willing to pay that?
Hi X,
Would be very appreciated to get a Service & CV from you?
Regards, Johan
" Service & CV from you?" to what purpose? What do you expect for that?
Send a PM if serious.
Bill
Quote from: memoryman on April 16, 2016, 09:13:46 AM
" Service & CV from you?" to what purpose? What do you expect for that?
Send a PM if serious.
Bill
Hi Bill, Always serious, live is to short! Why would you think, we would be other than serious?
Simple, you're offering openly you're service's, so a bit about you're credentials / background, would be a normal business question. We are looking for someone with a wider understanding, and also maybe some Marketing / Buss. connections. Not for our Buss., just to get it at People with a real GO!
Thanks and regards,
Johan
You want someone with a wider understanding huh?
He doesnt even know how to use a cadeusus coil properly since hes looking for more amps and volts. He also hasn't a clue where the gravity beam is, that already contains perfectly balanced EM enfolded nor how to extract it.
Quote from: Meta on April 14, 2016, 02:32:52 PM
I don't believe you know what the hell you're talking about when you use the words voltage and power.
Actually, from my previous conversations with the Pirate, I can safely write that he has a good hold on the concepts of voltage and power.
However, I cannot write the same about your understanding of the power concept after you failed to grasp how an ordinary capacitor can act as an amplifier of power, simply by being slowly charged and quickly discharged.
Quote from: verpies on April 16, 2016, 06:07:38 PM
Actually, from my previous conversations with the Pirate, I can safely write that he has a good hold on the concepts of voltage and power.
However, I cannot write the same about your understanding of the power concept after you failed to grasp how an ordinary capacitor can act as an amplifier of power, simply by being slowly charged and quickly discharged.
Who gives a rats ass. You've done nothing with either.
Im not even using anything within electrodymanics theories so I dont need to know, fool.
The name of this thread is Gravity Devices, not Electric and Magnetic Devices, get it yet?
Keep trying to salvage your fragile ego though, with inconsequentials
Voltage and power are as as much electronic engineering concepts as physical ones, so if you are not designing nor building electronic devices then you really do not need to know them.
However Pirate and I design, build and even debug plenty of electronic devices and we need to know them, so we do. Just look at the history of our posts and attachments (http://overunity.com/profile/verpies.28297/area/showposts/sa/attach/sort/posted/start/15/)...
Quote from: verpies on April 16, 2016, 06:57:13 PM
Voltage and power are as as much electronic engineering concepts as physical ones, so if you are not designing nor building electronic devices then you really do not need to know them.
However Pirate and I design, build and even debug plenty of electronic devices and we need to know them, so we do. Just look at the history of our posts and attachments (http://overunity.com/profile/verpies.28297/area/showposts/sa/attach/sort/posted/start/15/)...
Im well aware of your posts and attachments...and reject all of them as your latest wild guesses....you have no idea of what you are doing. Go back to school. Learn Wittaker again and Maxwell's 240 quaternions and forget the slaughtered electrodynamics from Heaviside and/or Lorentz.