If you all want free energy, build a Bedini like I have designed and put the tube inside of a large coil. 

Or you could build a smot like we are trying to design on the following thread and or at least give us some help designing one.

http://www.overunity.com/index.php?topic=6077.0

Geez I think @Gaboda is really @Grumpy.

Same anger, same slants. Hmmmmmmm. Maybe I should change my username to @wattsdown. lol

@IS

You have to admit that you build systems faster then an adolescent can sport a new pimple. A new one pops up every day. But then there is no long term follow-up on your devices so it is rather hard for members to grasp or follow any real progress. Maybe you should consider sticking to one or two devices and work them to the bone, then report back so we can all learn. Whatever.

@CP

I also wanted to say that during the coil discharge, consider that more then 75% of the coils mag field was lost. This is because the magnets where positioned to the left of the coils to get only the 1/4 of the coils push to be in the proper clockwise direction.

If you consider that a coil has north and south, but at a minimal base consider it has North Left, North Right, South Left and South Right, but in reality both polarities exit/enter at 360 degrees. That's why I said there is more then 75% of the field that is lost. I think you would have more rotation if the coils where turned clockwise about 15-20 degrees. This would put more of the North or South Left in the circumference of the magnets movement. That could be another variable to test further. At what coil angle will give the most spin?

So event though your coil/mag is not that efficient, it still managed to put some energy back into the caps.

I'm always asking guys to try something on their device and you are no exception.

Can you please just put the three caps in series and short them, three coils in series, then both parallel but put a diode inline pointing to the cap positive. Put your meter on the cap. Now manually spin the rotor hard enough to make 3.0 to 3.5 turns and tell me what you will see on the meter as a voltage rise. Do it at least three times and get an average. That is the return I am talking about that I would need to know to better understand your videos.

But all in all you may work your device a little more and possibly make it a self runner.

@nightlife

I'll go to that thread and check it out. I have some ideas and wonder if you guys can check it out with your many magnets.

yo dude you got the worng dude! stright up


i have never ever been to that site and i only ever worked here on ou all my posts are here

i posted in the beguining long b4 i herd of the tpu on a few diffrent fourms

my water turbine  that is all


so i dont know what to tell ya ... 



not me bro ....     

now if youll excuse me i have to find where the hell i went wrong!!!!!


cuz im not done it doesent work the way i thought it would have ....  running my mouth b4 i proved it to myself .... WRONG WAY

let this be everyones lesson ....

unless you all like to look like THE FOOL IN THE  END  just as i have....

so be it ...... i will be quiet now ... 

ill be at my bench working


ist

@thebuzz

QuoteToo bad Allcanadian and gotoluc started a flame war over there. I posted the info. energeticforum deleted for some reason. But I have a copy!

LOL, so you are Gotgas, now it makes perfect sense, LOL
I'll tell you what, why don't you start your own thread here at OU and you and I can debate your theories like responsible adults without all the name calling. Intruding on others threads and flaming people is just rude in case you have not figured that out yet.

QuoteSuppose I know how every free energy device ever validated works. Now would I pass the details on how to convert mass into the atomic mass contained within mass to a pack of spider monkeys completely lacking in integrity and the intelligence that springs forth from that? Probably not

Wow, every one----- you and I are going to have a lot to talk about then.
I don't want to flame anyone, like I said at the energetic forum I would like to hear what you have to say---but not in this thread.
When you have a tread started PM me.
Regards
AC

Yeh, no fighting inside, this bar was just renovated. lol