Lets get some Guidelines going, No particular Order:

   1: Entrants must agree on the same baseline Type/Make/Model of Motor.
   2: Entrants must document at every stage for the final entry.
   3: Entrants must be willing to concede to the voters.
   4: Circuits must be accurate and disclosed to the voters.
   5: Entrants must be serious about this challange!
   6: All submitted videos must be longer than 30 seconds.
   7: Videos must show the entire device, nothing hidden and nothing secret.
   8: All data must be Scientific and Real, no fairy tale BS...
   9: If the entrant chooses, torque and electrical output can be included in the Data. Both must be recorded at the same time.
   10: Major modifications must be passed by the other entrants, but Permanent Magnets can be added.
   
Gee Help me out guys!!! What else?

Also: "beat frequency generation" - Really? You really dont know what this is? What do you think Brad, you think "beat frequency generation" is a good accurate term for what Jim Murray is showing there?

   Chris Sykes
       hyiq.org

 author=EMJunkie link=topic=15307.msg490838#msg490838 date=1472803513]



Because, really, there is just far too much talk!!! Decades of BS from the professional BSérs!!!

Which, by the way, I know will not participate in the Challange!

   Chris Sykes
       hyiq.org

The proof is always in the video Chris,and it is in plain sight in Jim Murray's video as well.
But the fact is,when some one like Erfinder start to promote such rubbish,others tend not to bother looking at things carefully,and just believe what they are told.
Either Jim is very stupid,or is being very deceitful-or he may have simply not understood what he was seeing,or just missed it altogether.Lets give Jim the benefit of doubt,and say he just dose not understand eddy current heating,and conversion of that heat into electrical power,as this is exactly what is happening with the demo of his early dynaflux generator-conversion of eddy current heat into electrical power.

Lets look at the original dynaflux generator,and the claims being made in the video.

https://www.youtube.com/watch?v=HK3JOlY0V8Y&feature=youtu.be&t=2520

First the claim
At 12:30 in the video Jim states that the machine(the dynaflux generator) hardly reflects the load to the prime mover,when the load(two bulbs) are switched on.

That is absolute rubbish.
In fact,the machine(the generator) presents a very large load on the prime mover,only Jim dose not see it-nor do most that watch these sorts of scams.

Unfortunately for Jim,his video shows that the dynaflux generator places a huge load on the prime mover,and  only delivers 13.07% of the load that the generator places on the prime mover,to the bulbs.
The efficiency of the generator is the worst i have seen,and we can make accurate calculations using the information in Jim's own video.
P/in total =556.32 watts
P/out to bulbs=40.09 watts.
Efficiency=7.2% 

Erfinder says that Jim Murray is !tha man!,and i say that Jim Murray has no idea what he is doing or looking for,or is being out right deceitful--> i would think lack of understanding what he is seeing would be more the case

This is why Erfinder thinks Jim is the man,as he is just as lost as Jim is,and dose not understand what he is looking at.

Erfinder will not challenge me on this,as he knows i can present the good's-show,explain,and prove that the dynaflux generator places a huge load on the prime mover,and delivers very little of that extra load to the bulbs-->only 13.07% of the extra power is delivered to the bulbs,and the rest is waste heat.
Like i said,it's a great heater.

To others on this thread
You can mock and hate me all you like,but facts are facts--and all the proof is in Jims video it self.
You can choose to continue on blindly,or you can be true to your self--your call.

If anyone here would like me to back up my claim's,using only Jims own video,i am more than happy to do so.

Also: "beat frequency generation"  What do you think Brad, you think "beat frequency generation" is a good accurate term for what Jim Murray is showing there

No Chris
Once again,Jim is lost,and dose not know what  AC Induction motor slip is-so he came up with beat frequency generation 
I can(and have) replicated this effect using an !off the shelf! AC induction motor,and variac--it's that simple. At low voltages,where the frequency remains at 50/60Hz,the motor will !slip!. When the voltage gets high enough,the poles of the motor will grab the frequency,and synchronize with it.
This is exactly what Jim shows in his video--no !beat! frequency there.


Brad

Quote from: EMJunkie on September 02, 2016, 05:11:28 AM


Lets get some Guidelines going, No particular Order:

   1: Entrants must agree on the same baseline Type/Make/Model of Motor.
   2: Entrants must document at every stage for the final entry.
   3: Entrants must be willing to concede to the voters.
   4: Circuits must be accurate and disclosed to the voters.
   5: Entrants must be serious about this challange!
   6: All submitted videos must be longer than 30 seconds.
   7: Videos must show the entire device, nothing hidden and nothing secret.
   8: All data must be Scientific and Real, no fairy tale BS...
   9: If the entrant chooses, torque and electrical output can be included in the Data. Both must be recorded at the same time.
   10: Major modifications must be passed by the other entrants, but Permanent Magnets can be added.
   
Gee Help me out guys!!! What else?

Also: "beat frequency generation" - Really? You really dont know what this is? What do you think Brad, you think "beat frequency generation" is a good accurate term for what Jim Murray is showing there?

   Chris Sykes
       hyiq.org

Sounds like fun Chris.
Im in if you can get Erfinder to accept the challenge as well,as it is he that stated my works are abominations,and my challenge is to those that have much to say about my work,but never have the balls to challenge it.


Brad

Brad, none of my posts were directed at you, all at Erfinder and his Fairy Tale Science BS!

I only meant to offend Erfinder, who else do you know that makes 30 second videos showing nothing but Hot Air!!!

   Chris Sykes
       hyiq.org

Quote from: Erfinder on September 02, 2016, 10:55:56 AM

Ah there he is....the one.....the only.....mr. non existing self assisting oscillations (as seen on his scope....in an hour long presentation where you only hear static noises when he connects and disconnects a coil....rubbish....) ABOMINATION......partnered output coils are a sad joke.....you need three coils, not two jackass....I hope you are taking notes....this is how you offend someone.


And as far as the challenge goes.....you boys got me shaking in my boots....I think I wet myself.....being of the unreasonable, weak sort, you felt it necessary to tag team me, unfortunate, were this not the case, I may have considered, it's out of the question now.  You both have done a piss poor fine job at demonstrating (uh not....) that I only practice junk science.....I am so ashamed....I am a lost cause, cause I see what Jim Murray has and understand how to  use it, I'm stupid because I can respect the significance of generating beat frequencies, and can but won't sight examples of others who have done the same in the past and are doing it today....I am the definition of whatever you say, and you know what, I can live with that.  Why, because what you say to me or about me doesn't sustain, nor take away from who and what I am and represent. 


If you think that you or your partner in crime are going to run me off, because I don't speak the agreed upon language, you got another thing coming.  The smart thing to do would be to ignore me till I put my foot in my own mouth.  Not going to happen, but I will do my absolute best to keep sounding stupid for you two.....You two are at the heart of the problem within the community.  You think you are helping folk, but you aren't.  What are you helping them with, let me see.....ah yes....you are helping them to conform.  You aren't helping them to see things as they choose, as did those who came before the laws were penned?  So much information, so many long videos, so many debates, belittlements, battles, and what do you have to show for all your effort, what do the followers have to show for your effort (don't show me the stuff your groupies have done, not interested in that...) what has anyone gained from your insights, I can sum it up in one word....NOTHING.  Chris.....you spend a lot of time here, things not going well for you and yours in that private group....If I had such a group, I wouldn't be here.....that's just me....You both glorify yourselves, your work, my this my that....you offend my work....blah blah...You ass clowns or as brad says, asshats, (stupid) offend (specifically brad) those who have been working for decades, men with real educations, real experience...WTF?  To hell with you both and anyone else in your posse, you both have nothing, and with any luck, you'll never will have more than that two day old sandwich on your desk with the soft shit butter spread. 


Hot air.....I like that.....lots of good done with hot air....hair dryers....hot air balloons....gliders work on thermals don't they.....BS science can be used to generate hot air....From the junkies mouth, BS has practical value...




Retards

So, I guess this is your odd way of accepting this Challange - Brads Build Off Challange? - Put your Work where your Mouth is, let that do the talking for a while!!!

Are you able to squeze out a Yes or No?


   Chris Sykes
       hyiq.org