Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Nathan Stubblefield Earth battery/Self Generating Induction Coil Replications

Started by Localjoe, October 19, 2007, 02:42:39 PM

Previous topic - Next topic

0 Members and 54 Guests are viewing this topic.

Print
Go Down Pages 1 ... 144 145 146 147 148 ... 809
User actions

Pirate88179

#725
January 05, 2008, 12:35:40 PM
@ Bruce and Joe:

I don't disagree with your points, they are good ones.  I just want to get the power up to something anyone could view as useful, and then work on consolidating and compacting it.  Kind of like computers, if they tried to build ENIAC (which took up a large room) to fit on a desktop as a design parameter, we would still be waiting for them to build it. I don't have any extra $$ at this time so it may be a moot point.

I had a dream last night that I took my two magnesium blocks and drilled two holes  in each block such that my zinc spikes could go through the holes and make a frame. (Kind of like what Freezer was doing)  then, I was going to wrap the zinc with bare copper wire, which would give me 4 wire ends , or two, depending if I jumped the wire over to the other zinc spike or not.  I am not sure what do do with these ends unless I use them (tied together) as an attachment lead?  My thoughts are that both the mag. blocks and the zinc are on the extreme minus end of the scale and possibly the coil arrangement with the copper wire (with zinc cores) might "gather" more mA.  You guys think this is worth a try?

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen

Pirate88179

#726
January 05, 2008, 01:01:59 PM
Here is yet another really crude drawing to hopefully explain what I was trying to describe in my last post.  I have the stuff here to try this today if I want to.  It won't cost anything but time.

     ps I did not get Freezer and Artic Knight confused again (Ha ha)  I borrowed Freezer's plates cell idea and used
              Artic Knight's wire wrapping coil test idea as well.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen

jeanna

#727
January 05, 2008, 02:41:58 PM
Quote from: Pirate88179 on January 05, 2008, 01:01:59 PM
Here is yet another really crude drawing to hopefully explain what I was trying to describe in my last post.  I have the stuff here to try this today if I want to.  It won't cost anything but time.
Bill

DO IT
jeanna

Bruce_TPU

#728
January 05, 2008, 08:45:01 PM
@ Bill

That looks like a great idea to try.  I look forward to hearing the results.

While waiting on my magnesium and carbon rod, I tried several experiments today.

I tried using a carpenters pencil, sharpened at both ends as one electrode, and a zinc nail for my other electrode.  The reading was 750 mv.  No ma.  Zero!

I then tried a mini Stubblefield type coil that I wound.  I saw 1.2 volts on the primary, which was five layers of thirty wraps each, bifilar 20 awg magnet and uninsulated steel wire, around three zinc nails.  Secondary was of 20 awg magnet wire.  I am thinking now I should maybe overwrap that with more steel wire.

It only registered voltage, as it went under ground.  But, still, NO ma.   ::)  And that was sad.

So, I think there is something to the bifilar copper and steel, but still missing amperage.  I hope that the carbon 1/2" rod and magnesium blocks will provide better.


2008 Cheers,



Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Pirate88179

#729
January 05, 2008, 09:53:35 PM
@ Bruce:

That's very interesting.  Were you alinged on a global orientation? Or just picked a few spots?  I would have thought you would have seen at least some registration of mA.  But, interesting that you achieved a pretty good volt reading with the primary.  So, in the really terrible sketch of my latest crazy idea, where would you connect the wires from the windings?  I guess, all bets are off here anyway so maybe a few guesses and several different configurations are in order.  The way I see it, I will have two zinc rods wrapped and I can either join them at one end by jumping over to the next rod, or, keep them isolated.  If isolated, I will then have 4 wire ends to do what with?  I can make it like series and just continue on down the second zinc spike while winding but then, I will have 2 wire ends.  Do I tie them together?  Do I "ground" one to a magnisium end block?  Should I tie them together (like in the picture) and use them for the connection lead?  I guess this is what experiments are for.  Any advice you might have would be appreciated.  Thanks.  P.S.  Where is a good source for copper wire?  the home stores around here don't carry it unless I buy romex and strip the ground wire out of it.  Or, should I use steel wire?  I know, too many questions and not enough answers.  Thanks.

Bill
See the Joule thief Circuit Diagrams, etc. topic here:
http://www.overunity.com/index.php?topic=6942.0;topicseen
Print
Go Up Pages 1 ... 144 145 146 147 148 ... 809
User actions