Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Thane Heins Perepiteia.

Started by RunningBare, February 04, 2008, 09:02:26 AM

Previous topic - Next topic

0 Members and 48 Guests are viewing this topic.

Print
Go Down Pages 1 ... 220 221 222 223 224 ... 959
User actions

OilBarren

#1105
March 23, 2008, 08:06:38 PM
Quote from: powerunlimited on March 23, 2008, 07:38:26 PM
Something to ponder,5 neo magnets 3/4 inch put on the shaft,with the wheel,rotating with the shaft
the rpms of the wheel are  monitored by an wireless optical tach just bought it cheap ,thats accurate to .5 rpm,
no effect the wheel accelerates
when the coil is shorted as with out the magnets on the shaft,not a magnetic field as for what it is,"UNKNOWN" just did this a while ago.If theres 25 gauss on the shaft normally imagine how much with 5 neo 3/4 inch magnets on the shaft and it still accelerates with the coil shorted very strange shit.

DEAR POWERUNLIMITED,

CAN YOU ELABORATE AGAIN PLEASE?
FORGET IT - I THINK I UNDERSTAND.

TRY TO RECREATE PART 4 OF THE DEMO VIDEOS IF YOU FEEL UP TO IT?
YOU WILL NEED A 1/8 HP SPLIT PHASE MOTOR.

Thane

OilBarren

#1106
March 23, 2008, 08:31:28 PM
Quote from: powerunlimited on March 23, 2008, 07:38:26 PM
Something to ponder,5 neo magnets 3/4 inch put on the shaft,with the wheel,rotating with the shaft
the rpms of the wheel are  monitored by an wireless optical tach just bought it cheap ,thats accurate to .5 rpm,
no effect the wheel accelerates
when the coil is shorted as with out the magnets on the shaft,not a magnetic field as for what it is,"UNKNOWN" just did this a while ago.If theres 25 gauss on the shaft normally imagine how much with 5 neo 3/4 inch magnets on the shaft and it still accelerates with the coil shorted very strange shit.

I DID AN EXPERIMENT THE OTHER DAY WHERE I USED A MAGNET-LESS ROTOR AND I RAN AC THROUGH ONE OF MY COILS.

THERE WAS NO ACCELERATION

I ALSO PUT THE AC COIL ON THE MOTOR CAST IRON BASE - NO ACCELERATION.

NEXT WEEK I AM BUILDING A UNIT WITH A PM BRUSHLESS GOLF CART DC MOTOR TO SEE IF THIS WILL WORK FOR THE DUNE BUGGY.

Thane

powerunlimited

#1107
March 23, 2008, 08:32:59 PM
Hi Thane
I place 3/4 inch 5 neo magnets stacked on the shaft of the motor on top of the wheel,i monitor the rpm with a very accurate optical tach,.5 rpm accuracy,then let it run to get a stable speed,then short out the
coil, the wheel accelerates the same as with out the magnets remember the 5 magnets are all so rotating with the shaft,the effect is not effected by the presence of such strong magnets, it still accelerates.My set up is 6 holders two magnets on each holder, 3/4 inch neos, one coil.

OilBarren

#1108
March 23, 2008, 08:34:56 PM
Quote from: powerunlimited on March 23, 2008, 08:32:59 PM
Hi Thane
I place 3/4 inch 5 neo magnets stacked on the shaft of the motor on top of the wheel,i monitor the rpm with a very accurate optical tach,.5 rpm accuracy,then let it run to get a stable speed,then short out the
coil, the wheel accelerates the same as with out the magnets remember the 5 magnets are all so rotating with the shaft,the effect is not effected by the presence of such strong magnets, it still accelerates.My set up is 6 holders two magnets on each holder, 3/4 inch neos, one coil.

DEAR POWERUNLIMITED,

CAN YOU ELABORATE AGAIN PLEASE?
FORGET IT - I THINK I UNDERSTAND.
I TRIED THE SAME THING THEN SWITCHED MOTORS.

TRY TO RECREATE PART 4 OF THE DEMO VIDEOS IF YOU FEEL UP TO IT?
YOU WILL NEED A 1/8 HP SPLIT PHASE MOTOR.
Thane

innovation_station

#1109
March 23, 2008, 08:38:22 PM
Quote from: OilBarren on March 23, 2008, 07:50:48 PM
"But wait, I forgot to include the fact that the Neo is probably saturating most/all of the core the the coil is wound on likely making it little more than an air core". Aether22

AETHER22 THIS IS PROBABLY THE MOST INTERING PROPOSAL I HAVE HEARD YET...!
AN AIR CORE WOULD PRODUCE THE MINIMUM BACK EMF INDUCED FIELD.

SO WHY THE DIFFERENCE IN PERFOMANCE PRE AND POST 3" STEEL BAR?

WE HAVE ALSO CONSIDERED POSSIBLE MOTOR ACTION FROM THE ROTOR FLUX AT THE SHORTED COILS.
Thane



that is intresting

i  in reading this post got an idea   sorry guys ...   

but thane have you conssidered there may be some kind of wirless power tranmission between the coils motor and shorted generator coils

just poped into my head thought i would share it 

are your coils tuned  if they were would they not transmitt through resosnance

i just dont know enough about it  with out building .....

on my other ideas i shared they are only ideas and drawings and have yet to be proven true but what if .......

ist

happy easter everyone and God Bless

To understand the action of the local condenser E in fig.2 let a single discharge be first considered. the discharge has 2 paths offered~~ one to the condenser E the other through the part L of the working circuit C. The part L  however  by virtue of its self induction  offers a strong opposition to such a sudden discharge  wile the condenser on the other hand offers no such opposition ......TESLA..

THE !STORE IS UP AND RUNNING ...  WE ARE TAKEING ORDERS ..  NOW ..   ISTEAM.CA   AND WE CAN AND WILL BUILD CUSTOM COILS ...  OF   LARGER  OUTPUT ...

CAN YOU SAY GOOD BYE TO YESTERDAY?!?!?!?!
Print
Go Up Pages 1 ... 220 221 222 223 224 ... 959
User actions