Larskro's magnet motor video was a fake - he admits on second video

[Magluvin]

 Here is the post where I have posted the sim of Lars circuit code.

It has an interchagable battery of opposit polarty you can select and drag into position to see the difference. Led will light in both circuits and they only flash when the coil colapses, not because the battery is biasing them.

http://www.overunity.com/12238/larskros-magnet-motor-video-was-a-fake-he-admits-on-second-video/msg318951/#msg318951

You will see the difference in how the coil reacts from circuit 1 to circuit 2 

1 the coil reverses current flow when the reed opens, back into the battery    BEMF

2 current flow is alway in the same direction when the reed opens, always drain   Continued EMF

But M says they wont work. So get busy all my OU Friends. If M is lying about it, it must be good. 
He will never admit that the current in the coil will reverse. We have been over this and he aint budging.  But I bet he knows it can happen. Just doesnt want everyone to know.

Mags

[WilbyInebriated]

milehigh is a has-been. nothing more. no imagination and thus, he couldn't innovate his way out of a wet paper bag... he has spent his life alienating people, so now he's just a lonely old has-been with no friends, sitting in front of his pc with his 'obsessions'... which are; stalking 'ou' experimenters, posting logical fallacies and outright falsehoods on their videos, in their threads etc. and posting hateful comments on youtube 'riot' videos. pathetic.

http://www.youtube.com/user/User2718218

[MileHigh]

Jesus, forum board software is broken or it has a virus or something.  Well, I hope it's still working when I hit the "Post" button....

Mags:

Jesus, I made a mistake and forgot that an LED drops two volts and not one volt.  I must be a friggin' psycho.  It's only been 31 years since I last soldered a current programming resistor to a LED so shoot me.

So indeed the second schematic does not have a critical mistake but it's a poor design and I would still call it a mistake.  With the battery were it is, it makes it that much easier to turn on the LED from induction though the coils and you don't want to do that.  You want a clean flash from the LEDs when the coils discharge only.

So my schematic is still the right schematic.  But horror of horrors, I forgot what the normal LED forward biasing voltage is.

Back to the first schematic... That's bloody amazing seeing "BEMF" make the current reverse in the coil!  I guess everything I told you about the coil maintaining current flow in the same direction was wrong....  MY GOD, I ran the simulation and saw the current reverse and the LED light up.  It was farking fantastic.  Incredible!  You know that's DSOs never lie, eh?  You and Rosie are peas in a pod!  I am looking forward to seeing your clip on that one with the current reversing direction.  I must have got lost somewhere down the line.

Beyond that you are still playing the bad-assed little nut-case and making yourself look like a jerk.

MileHigh

[MileHigh]

How many wigs Wilby?  lol

[Magluvin]

Jesus, forum board software is broken or it has a virus or something.  Well, I hope it's still working when I hit the "Post" button....

Mags:

Jesus, I made a mistake and forgot that an LED drops two volts and not one volt.  I must be a friggin' psycho.  It's only been 31 years since I last soldered a current programming resistor to a LED so shoot me.

So indeed the second schematic does not have a critical mistake but it's a poor design and I would still call it a mistake.  With the battery were it is, it makes it that much easier to turn on the LED from induction though the coils and you don't want to do that.  You want a clean flash from the LEDs when the coils discharge only.

So my schematic is still the right schematic.  But horror of horrors, I forgot what the normal LED forward biasing voltage is.

Back to the first schematic... That's bloody amazing seeing "BEMF" make the current reverse in the coil!  I guess everything I told you about the coil maintaining current flow in the same direction was wrong....  MY GOD, I ran the simulation and saw the current reverse and the LED light up.  It was farking fantastic.  Incredible!  You know that's DSOs never lie, eh?  You and Rosie are peas in a pod!  I am looking forward to seeing your clip on that one with the current reversing direction.  I must have got lost somewhere down the line.

Beyond that you are still playing the bad-assed little nut-case and making yourself look like a jerk.

MileHigh

If you dont know these things after 30 some years? Ya better , well, I dunno....  But you sure put it all together as if it is fact.  Bang!  Dead yet? No? Bang! BangBangBangBang! Might have to reload, aint dead yet.  ;]

Oh, so now you say that "So indeed the second schematic does not have a critical mistake but"  Yes indeedy. But just in your recent posts you had some other ideas.
There is nothing critical about the second circuit. It works for doing what it is intended to do. Just uses batteries faster. Still it makes the fake turn and light. Nothing critical.
Nothing much to say on the first circuit here? It works too and you said it didnt work. Oh, you do mention later..... will get to that in order.

I want a clean flash from the led when the coil discharges only?  No M. You want people to believe what you are making up. Who says the led needs to be bright in order to indicate that it is lit?  Anyways your wrong. it is bright.

Oh the Horror. ya got that right. maybe you should hit the books for a bit before you play your game son.  So your circuit is the one? The one that you created that Lars said "this will work also", and you take that as if your circuit is the right one?  In your mind only.


"Back to the first schematic... That's bloody amazing seeing "BEMF" make the current reverse in the coil!  I guess everything I told you about the coil maintaining current flow in the same direction was wrong....  MY GOD, I ran the simulation and saw the current reverse and the LED light up.  It was farking fantastic.  Incredible!  You know that's DSOs never lie, eh?  You and Rosie are peas in a pod!  I am looking forward to seeing your clip on that one with the current reversing direction.  I must have got lost somewhere down the line."

There you go. How does that foot taste. Well you may as well keep it there.  I know what you are driving at M.  Here, how about this...

Hey Garry. If you reverse your led polarity, do they still light? What about if you reverse the battery instead( need to reverse the coil wires also to correct the field for the motor to run)  Ill show you mine if you show me yours.  ;]   Ya forgot about Garry huh M. Ace in the hole.  ;]    Mags got game. 


And finally  "Beyond that you are still playing the bad-assed little nut-case and making yourself look like a jerk."   

Feeling some heat are we? its ok to blow off a little steam. You deserve it. 

Thats all I have to say about that.  Forest. Forest Gump

Mags