Richard VIALLE's new theory about negative mass and overunity

[Khwartz]

verpies and Khwartz,   I know both of you are good people just trying to get to the truth of free energy.   Please don't let yourselves get stuck in a self running loop of misunderstandings and worse     I think much of the problems are from language (and sometimes the associated differences in general expression).   Lets don't let this thread turn in to a flame war.   It's some very good info and work going on here.   I bought some components in hopes of trying some things with this myself.   I just need to go back to understand how to make the U shaped coil and I'll be ready for some experiments.    Cheers

Hi e2matrix!

Thanks for your constructive intention

Could be verpies is not so bad but I still think he has not himself realised he was ONLY running 1 side of the problem, and you have surely noticed: I don't appreciate his way to think we are necessarily idiotic, unskill, having not the capability to question our own work in France (despite the very well known case of JLN).

zgreudz, I have mentioned just before, came 2 years ago on the cos.com community indeed to prove that all these was just mismeasurements
2 years after he is still there and is one of the best sustainer. Non to speak of his regular coming on different replication threads to check if everything is in order about the measurements technics.

For now verpies knows near nothing about this device (compare to the quantity of data accumulated) and its replications. So at least he could restrain his skepticism and wait for more informations before to tend to say that it can be true or we have not made a good deal of self checking and self criticism.

Sorry to repeat myself but what is needed is higher skills in the fabrication of very law consumption amplifier with some very specifics like a kind of two way chanel or very very specific transistors, to allow the "negative power" to go through the initial power supply and be harvested in the batteries.

I repeat, yes, it has been done already by the Switzerland former sponsors of Richard, two persons can testify of: Richard himself and PascUser that they had acheived these results.

We need the whole community to help because we need to do an amplifier of the quality the sponsors had made. Then we would be able to selfrun, and then simple "cheap chinees multimeter" will be large enough to prove the selfrun

If verpies can moderate is doubts on our skills in France, I am ready to hear better what he says for a constructive approach ("constructive" doesn't to necessarily be agree or believe, but to grant a certain level of good will and not running always possible outpoints nor thinking only the person knows), otherwise he may go to hells

[Khwartz]

@ tim

Dear tim, you remember you asked me about the pigtail ("Queue De Cochon", or "QDC" in French).

BlueDragon told me that it had evrething with the Richard's Autogenerator! 

Indeed, it was in the purpose to economise place that the "RAG" has been made spiralling by PascUser.

Then it has been fond that the space around the QDC was physically affected by the QDC, and when placed on an Robertval balance, strange phenomenons were registered and measured. The frequency for the QDC to influence space was 175 MHz.

Blue confirms too that Keelies ideas are what could be the closest of Richard's theories. Nevertheless, I have to  indicate that hugely enough, the first looks to be "eatheroman" while Richard used the very classical physics and its tools at the very base of his work.

Hope this clarifies a few the question

Best regards,
K.

[Khwartz]

Hello All!

Here is a post which should make happy our dear verpies, not for the content itself, the data, but because he would feel free to laugh at me at will! 

BTW,

this is an important post because this is the viewpoint of skeptic AND a high level engineer, director of a engineering office, specialist in measurements.

I have to say he has not succeed himself to prove yet any conclusive overunity for his own Autogenerator, even if he still continues to invest time on the Autogenerator, in the teem of the Promtecno association.

So, I let him expresses himself as he was nice enough for me to answer me in English:

Expéditeur: zgreudz
Destinataire: Khwartz
Envoyé en copie à: bluedragon
--------

Salut zgreudz

{Hi zgreudz}

Je sais grâce à BlueDragon que tu t'y connais en terme de mesures, or je voudrais te demander de bien vouloir jeter un oeil à la liste de points de méthodologie de mesure de puissance pour laquelle je souhaiterais que tu m'indiques lesquels dont tu tiens compte déjà et lesquels tu envisages déjà de mettre en place dans tes propres expérimentations.

{I know thanks to BlueDragon that you know about measurements, while I would like to ask you agree to have a look at the list of items of methodology measurements of power about which I wish you could indicate me which ones you actually take in account and which ones you project to set  in your own experiments. }

C'est sur le fil de proximité informative avec overunity.com.

{This on the mirror like thread with  overunity.com.

http://www.conspirovniscience.com/forum/in...=60&#entry43927

Je sais que c'est en anglais (le but du fil étant d'intéresser justement les non-francophones) et il y a des points je ne sais même pas ce que c'est. Par contre, si tu as vraiment besoin d'aide pour que je te traduire tout ou partie, je suis quand même là pour ça, donc juste demande moi en cas vraiment de besoin

{I know it is in English (the purpose of the thread is indeed to interest the non French tongue) and there are items I even don't know what's that could be. But if you truly need help from me to translate all or a part of, I am here in this purpose, so just ask me in case you need }

Bien amicalement,

{Best regards, }
K.

Bonjour Khwartz

You mean this ?

(The objection was that working by intragation time after time the data of an oscilloscope, RMS amps and RMS voltage, is not enough to certify a power reading, and that we need to take care too of:)

1) Waveform shapes
2) Crest factors
3) any DC components
4) Quantization errors of ADCs (two such errors get multiplied in power calculations before integration !).
5) The maximum frequency rating of the RMS or U*I multiplier.
6) The relationship between the sampling rate and the maximum frequency content of the measured signal.
7) Resistance and inductance of current sensing resistors or the frequency response of magnetic current probes,
icon_cool.gif The position of the voltage probe in relation to the current sensing element (before/after).
9) Stray capacitances
10) EMI

Yes these are classical precautions that I adressed when I have done measurements on the U I built. First I have to precise I am a skeptical one (openminded but still for me extraordinary claim needs extraordinary evidence) and at this very moment I found no evidence of overunity on the U and on the GEGENE....But still I am working actively on the subject. So in my opinion it is a bit premature to spread the word when no massive overunity has been demonstrated or ruled out.

1 & 2 are related to devices where there are a lot of harmonics like the tesla coil on a induction plate (GEGENE). For this I built specific measurement devices (electronics wide band current transformer probes). Actually I built 2 matched sensors to compare input and outpout which "identical" devices (in measurement world, identical means having the same mean value within a given tolerance range icon_smile.gif. But this does not apply strongly on the U because the harmonics are limited (except with some bad oscillators)

3 and 4: I adressed by using long term data acquisition (many periodes see below) and fitting a sinus signal on the curves (because here, as Pascuser said, in that case, all signals are nice and sinusoidal). The model is : V[t]= A Cos[omega.t]+B.Sin[omega.t]+C, I estimate A, B, C linearly (linear regression in analytic form) and omega by minimization of the residual error. Then I can calculate the power, impedances, etc. See on my thread that Blue indicated.

5) & 6) all measurement are done with a 4 channels TDS3034 Tektro scope 2.5Gs/s, which can store about 10000 samples per sweep (mean 20 periods max @5MHz), so having enough bandwidth + time and spatial quantization for a precision better than 2% at 5MHz. For quick and dirty evaluation when installing the measurement I use the internal measure functions of the scope, after I check that they are compatible with the results I get from raw samples.

7) & icon_cool.gif For this I built a specific probe (called "Sonde de Zgreudz" on the forum) which is simply an aselfic, ohmic probe of low value resistance. I qualified the probe with reference impedances that I linked to a calibrated measurement bridge HP4784A. So in a way my probe is (remotely) tied to a measurement standard. The position of the probe is taken into account in this (see also my early tests in my thread about the U).

9) Stray capacitances are mesured on the U ( by using my aselfic probe actually) as well as inductance and ohmic losses. From this I built an electrical distributed model of my U. This model, fed by this parameters show the exact measured resonance on my U...meaning my U does not exhibit Vialle effect. I made the tests at low power (only with the signal generator, no amplifier).

My opinion is still there is no proof of evidence of overunity on MY device. I still think also that measuring the currrent and voltage with a floating scope connected at the junction between U and current shunt is a flawed method, especially on high impedances shunts , because in my understanding the return impedance on the scope common is not negligible (this impedance is essentially capacitive). And this is the method that gave overunity results on many experiments.

Voili voilou

{That's all buddy}


PS: je bosse actuellement et activement avec Promtecno sur un ampli plus adapté à faire démarrer le bousin, ainsi que sur un systeme "tout Arduino" mais je ne suis toujours pas dans le camp des convaincus.

{I am presently working hard with Promtecno on an more adapted amplifier to start the raw beast, and on a system "full Arduino" but I am still not on the side the convinced guys.}

A+

{See you}

Z.


Please have a look on my thread, all slide are in french but you can link them.

I told you, you would enjoy it, my dear verpies

Best regards to All!
K.

[tim123]

Hi Khwartz,
  I don't know of the history between you and Verpies, but I do find his posts helpful, and not at all negative or troll-like.

We have to expect and welcome any criticism that may come from the traditional-physics perspective - because they're often right.

I think verpies is just concerned with the difficulty of making good measurements. I certainly am. For example - one thing i intend to test, as soon as it's running, it to use a (specially made, HF) FWBR & capacitor to rectify the output to the load - so I can measure it as DC... Much easier. I have little confidence in my own ability to measure HF AC...

I would like it if we could all just play nicely together...

Regards, Tim

[tim123]

Dear tim, you remember you asked me about the pigtail ("Queue De Cochon", or "QDC" in French).

BlueDragon told me that it had evrething with the Richard's Autogenerator! 

Indeed, it was in the purpose to economise place that the "RAG" has been made spiralling by PascUser.

Then it has been fond that the space around the QDC was physically affected by the QDC, and when placed on an Robertval balance, strange phenomenons were registered and measured. The frequency for the QDC to influence space was 175 MHz.

Blue confirms too that Keelies ideas are what could be the closest of Richard's theories. Nevertheless, I have to  indicate that hugely enough, the first looks to be "eatheroman" while Richard used the very classical physics and its tools at the very base of his work.

Hope this clarifies a few the question

Hi Khwartz,
  I thought so... So perhaps the QDC is the most efficient design - at least in terms of space... Perhaps that answers wistiti's question.

I just got an ebay bargain - I could use to drive a QDC... - I got a 1-500MHz Linear amplifier - 150W... For cheap.

But I would need to analyse the autogenerator - and impedance match it - to make sure I don't blow up the amp... Hence my interest in VNAs etc... I also don't have a sig-gen for that frequency ATM... Would have to make one... Maybe from an NE602...?

My feeling is that Keely-physics is the real physics...


Tim