Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Partnered Output Coils - Free Energy

Started by EMJunkie, January 16, 2015, 12:08:38 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

EMJunkie

Quote from: Atti2 on April 15, 2020, 02:23:48 PM

Some thoughts.
https://www.youtube.com/watch?v=Wy1biXZKNNY&feature=youtu.be
With the small indicator (after all, it is a current transformer) you can clearly see the current change in the drive line on the oscilloscope.




Hey Atti - Refreshing to see a post with sensible content for once! Thank You! Good work on the vid! The bold and High Lighted is for the other non coherent readers to get their attention - ok?


Quote from: Atti2 on April 15, 2020, 02:23:48 PM

I think you need a transformer with a larger cross section to get better results. What I'm using now is probably too small. Not sure but I think the larger the surface the better the voltage due to the change in current. And here I am not thinking about traditional transformer theory.




Exactly right! The Output Coils are best as a Generators Coils are, Minimum Impedance, Maximum Cross Sectional Area, Maximum Wire Gauge, with in reason, -N dPhi/dt = E.M.F but I still haven't nailed this yet. Very good Atti!



Quote from: Atti2 on April 15, 2020, 02:23:48 PM

Hey Chris.
Can you tell me whether the nature of the circuit is closed or open? Forwards or flyback? Now I'm just curious about L1-L2.
If L1 and L2 have the same winding direction. The beginnings of the rolls are marked with a small dot in the drawing. If the starting wire of the primary is positive, will the diode in the positive direction come to the secondary wire?




The Circuits are Closed Circuits! L2 is Forward and L3 is Fly-back, but only from the Primary, it is assisting for the Primary. There is a specific Polarity that must be achieved. However we are working with an Open System! We have a Source of Energy, L3, that is adding an extra source of Energy to the System! This System is open, because it is not Symmetrical! Symmetrical = Equal and Opposite - Losses, all systems have losses, and all Systems must account for losses, but not all Systems must be Under Unity!

We have built an Asymmetrical System, a System that can have another Source of Energy, L3 and this can add Energy to the System, it is a Feed Back Mechanism, the More energy is drawn from L2, the more Current L3 carries. An OPEN System!



Quote from: Atti2 on April 15, 2020, 02:23:48 PM

As it is in the drawing? At the time, CD and I used it with both polarities.
I wonder if all of them work for you with polarity.
Did you only use it with this polarity?

Thank you, Atti.



It is possible to use Both Polarity's, but I don't recommend it when starting off, its hard and its best to get the best knowledge, before moving forward. Learn as much as you can on the simple, small cheap experiments before you go ahead and make more complicated. When it gets more complicated, it is harder to solve problems. Harder to troubleshoot.


Atti, I am going to restore your Membership to my forum! Please stay on track! I value your efforts here as I did on My forum! Welcome back Atti!


Everyone here should take something, learn from Atti's work!


You may not get Above Unity first time, but there is a clear and present path here and if one follows the path and moves forward, then Above Unity will come! Everyone must learn how to achieve this! Its super important, little steps for little feet! Focus on whats going on After the Input is OFF, because that's where MAGIC Can happen! I don't believe in Magic but you get what I mean!


During the OFF TIME that's when your System can PUMP Current well past the Point of UNITY! If V is High Enough! REMEMBER: I = V / R


Best wishes,
   Chris Sykes

EMJunkie




At the time of the Eureka Moment, many emotions of Greed, self serving thoughts, all the really evil parts of the Human Spirit, come out.

The individual goes through the worst of the Human emotions, not sharing, claiming it all as their own, thinking of making tons of money from it, dreams of swimming in wealth and all the totally stupid stuff that a mind with very little logic goes through!

After some time, one comes to realise, no one is ever going to make money on it! No one is ever going to be able to Patent it! No one is ever going to sell it and get rich!

Why?

Because the system has so many legal, and National Security loop holes that only the Un-Educated Mind would Try!

This Technology is only useful if it is given without Greed or Self Service or Emotional Attachment to the world as a whole! I have seen many go through the above stages, many never come out the other side thinking logically about it, many loose their mind and are never heard from again! I have seen this from the most unsuspecting minds! It is truly sad to see others struggle with such emotions of Greed and Self Service! Some people you would never expect to see this sort of behaviour from, they are often the worst! People become consumed, and then go mad!

Akula is one such example! Not to be heard from ever again!

Best wishes,
   Chris Sykes

Bob Smith


EMJunkie

Quote from: onepower on April 16, 2020, 06:29:40 PM
Nelson
I agree and the unfortunate truth is proven by cold hard facts throughout the history of FE. It demonstrates that the countless inventors who gave everything such as Moray, Hendershot, Tesla, Rife and so on basically died broke and disgraced. Another truth is that the people who have nothing of real value and failed have nothing to fear. It is only the real inventors who succeeded who are being constantly gaslighted and harassed by con men telling the inventor to trust them and just sign on the dotted line so they can ruin there lives. 

Well said, you nailed it and I have watched your work over the years and you have contributed more to the FE community than 99% of the people here in my opinion. Real circuits and devices shown in countless video's with intelligent circuit diagrams, scope shots and descriptions. It's easy to spot the con men, there the one's telling you to give them everything because they know better but offer little if nothing in return... I call BS.

The truth known to people like you and many other real inventors like myself is that if anyone actually gave a damn about humanity and moving forward they would be bending over backwards to find the real inventors, actually help them succeed in any way they can and get this done. However this is not the case, as both of us know, there is an endless line of con men talking BS who could care less about humanity and moving forward.

Been there done that and they can kiss my ass. I would rather be poor and happy than let them ruin my life like so many before me and there gluttony and greed is worthless if not perverted to me. Were better than this and it's absurd that an Atheist such as myself should be explaining credibility and virtue to so many self proclaimed believers gaslighting us in the name of profit... again I call BS.

I think your a good person based on the tangible value of what you have given to the FE community as real knowledge and understanding over the years, I cannot say the same of Chris. What is real offers insight, knowledge and value that which does not is what it is.




onepower - I BANNED you from My Forum!

I asked you to not come back to this Thread!

I had to Ignore you because your PM's became intolerable!

You bring your self importance back, and you try to sling abuse in the form of Slander.

I ask your Self Importance, again, do not come back, you are not welcome here one power, I mean Allcanadian!

Your display of Bad Behavior is enlightening for all here! I mean, for minds that are awake, this sort of thing, coming from you, only reaffirms how important the information I am sharing, really is! I guess a Thank You is in order again!

Lets see if your self importance controls you, or you control your self importance?

Best wishes,
   Chris Sykes

EMJunkie

...






Due to the extreme influx of Trouble Makers, making up Lies and misleading others with Fake information, I have decided to delete all Important posts on this and others threads I have created to try to help others.

The behaviour of some people here is so bad! So outright Evil, I have had enough of Stupid People Behaving Badly, I have decided that there is no use posting advanced information to this forum!

It is pointless, I am wasting my time!

Here is an example: Read surrounding posts and you make up your own mind. Look at the Morons that cant research their own way out of a Paper Bag!

There is, I am 100% sure, an active, Paid Disinformation attempt here to try and spread lies and mistruths here! Agents of EVIL!!!

This in itself should be enough for others to see who is involved! To see why they do these things. To see these patterns is important! Its always by the same people, or the same type of people!

I don't believe GOOD People should miss out, so all interested are welcome to join my Forum: http://www.aboveunity.com if they wish.

It so saddens me that so many Human Beings work so hard against other Good Human Beings! Why do some people partake in such EVIL? Why is there so much EVIL in this society?

My offer to help others, still stands, you have to come to my Forum for this help if you want it.

I warn you: Beware, some here are EVIL! They do NOT have your best interests at heart! Never have!

Best wishes, stay safe and well in these Dire Times,
   Chris Sykes