Looking for ... I got it!

[konduct]

      I have been researching different attraction configurations for a mag motor.  Of  course, the sticky spot is the worst enemy of the attraction motor.  I am pretty sure I can effectively shield a flux field.  **(Let me rephrase, I have already effectively shielded flux with minimal resistance. )  What I am looking for is a static configuration that would not need moving parts other than the rotor of course.  Also, no external power.  Needs to be self running.  Post any suggestions.

ok...

      All I can offer is the open source materials on any working replication as well as the opportunity to work further on research and dev.  I've already got about $1000 USD in small parts alone ready for this project.  Some of you have probably seen me lurking around here every day, waiting on that next little revelation to help put the pieces of this puzzle together.  Every possible minute I've had has been spent building, testing, revising, theorizing on a working motor configuration.  I'm not Part Time.  I run a major marketing firm in the US and plan to use it to help aid in the complete and proper implementation of the technology. I applaud those like Hartberlein and Jason O etc... for maintaining resourceful websites on this subject!

Just a side note...I don't want my name in history books, nobel prizes, etc...I just want the financial security for my family, as well as the overall worldwide benefits of a clean, abundant fuel.  I think we all just want to be able to go home at night and feel like we earned our living and left the world a better place than we found it at the same time, correct?

Any Ideas? 

     (I used to breed AKC Labrador Retrievers when I was younger.) I'm thinking of breeding two motors together and I'm pretty sure this is the one that will actually self run with considerable torque.    I've got enough hands on experiece with Neos and my shielding to "see" what's happening.  I think the problem with many initial concepts and theories is just a slightly skewed perspective of what they are actually dealing with.  It's kind of like a vehicle mechanic working on engines.  He may know everything about how a gasoline engine works...but that doesn't mean his knowledge will apply in the same way if he has to work on a diesel engine.  It's basically the same, but just a few differences in operation make all the difference in whether the engine will run.  Experiments with distance are also necessary for any magnet setup. Come on guys...we've come this far..."This, is a game of inches..."  Get those creative juices flowing.  I can get the investment money quickly...as soon as I've got a proof of principle model.



K~

Not sure why there hasn't even been one response.  70 views and not even one response?  That's pretty gay.  You guys will look at the same old ideas over and over, but god forbid anyone come up with something original!  I'm kind of glad.  I've always had to do things on my own anyway.  The temptation to share what I came up with in the past 48 hours is immense, however, I will spend tomorrow finishing my design rather than talking about it. (The neighbors don't appreciate my Ryobi router too much at night.) I also have three other possibilities that I think may work, but I am going with another one that seems to put out the most torque. I got all of the concepts that make up the motor from this and other sites though.  Good work guys.  Any ideas on naming it?  =)


.....!!!!!!!!!!Hahaaaaaaaaaa...I got it, I got it...I got it..........................

[FreeEnergy]

http://video.google.com/videoplay?docid=-100545142554902085&q=magnet+motor&hl=en

http://video.google.com/videoplay?docid=-117648347574834757&q=magnet+motor&hl=en

[CLaNZeR]

Why not post some pictures of your ideas and there are plenty of people on here that are willing to try them out.

You are asking others for designs on a static configuration and for them to post them in here, but in the same breath you are not willing to post your ideas?

If it is a commercial product that you want your ideas kept safe, then design and test it away from the public eye.
If it is going to be an open source project then post some ideas and you will probably find you will get some feedback.

Regards

Sean.

      I have been researching different attraction configurations for a mag motor.  Of  course, the sticky spot is the worst enemy of the attraction motor.  I am pretty sure I can effectively shield a flux field.  **(Let me rephrase, I have already effectively shielded flux with minimal resistance. )  What I am looking for is a static configuration that would not need moving parts other than the rotor of course.  Also, no external power.  Needs to be self running.  Post any suggestions.

ok...

      All I can offer is the open source materials on any working replication as well as the opportunity to work further on research and dev.  I've already got about $1000 USD in small parts alone ready for this project.  Some of you have probably seen me lurking around here every day, waiting on that next little revelation to help put the pieces of this puzzle together.  Every possible minute I've had has been spent building, testing, revising, theorizing on a working motor configuration.  I'm not Part Time.  I run a major marketing firm in the US and plan to use it to help aid in the complete and proper implementation of the technology. I applaud those like Hartberlein and Jason O etc... for maintaining resourceful websites on this subject!

Just a side note...I don't want my name in history books, nobel prizes, etc...I just want the financial security for my family, as well as the overall worldwide benefits of a clean, abundant fuel.  I think we all just want to be able to go home at night and feel like we earned our living and left the world a better place than we found it at the same time, correct?

Any Ideas? 

     (I used to breed AKC Labrador Retrievers when I was younger.) I'm thinking of breeding two motors together and I'm pretty sure this is the one that will actually self run with considerable torque.    I've got enough hands on experiece with Neos and my shielding to "see" what's happening.  I think the problem with many initial concepts and theories is just a slightly skewed perspective of what they are actually dealing with.  It's kind of like a vehicle mechanic working on engines.  He may know everything about how a gasoline engine works...but that doesn't mean his knowledge will apply in the same way if he has to work on a diesel engine.  It's basically the same, but just a few differences in operation make all the difference in whether the engine will run.  Experiments with distance are also necessary for any magnet setup. Come on guys...we've come this far..."This, is a game of inches..."  Get those creative juices flowing.  I can get the investment money quickly...as soon as I've got a proof of principle model.



K~

Not sure why there hasn't even been one response.  70 views and not even one response?  That's pretty gay.  You guys will look at the same old ideas over and over, but god forbid anyone come up with something original!  I'm kind of glad.  I've always had to do things on my own anyway.  The temptation to share what I came up with in the past 48 hours is immense, however, I will spend tomorrow finishing my design rather than talking about it. (The neighbors don't appreciate my Ryobi router too much at night.) I also have three other possibilities that I think may work, but I am going with another one that seems to put out the most torque. I got all of the concepts that make up the motor from this and other sites though.  Good work guys.  Any ideas on naming it?  =)


.....!!!!!!!!!!Hahaaaaaaaaaa...I got it, I got it...I got it..........................

[allcanadian]

I will take a guess here, you have got it-a magnetic shield,but you cannot shield a magnetic field so you have redirected it like the steorn LEMA does. If you have I applaud your efforts, but you realize if you try to patent this your screwed, if you start a company your investors will probably gang rape you, and like everyone else in the past 100 years you will end up penniless. But here's another option- full disclosure here on this site,at which point the impossible becomes possible regardless of what the scientific community believes, you then form a company based on known and proven technology,your technology and make a shwack of money and retire on a beach in mexico.
the perfect scenario

[konduct]

Lunch break update.... The LEMA patent is nothing special and refers heavily to a "linear motion" as well as using Netic / Conetic material.  Any patents for my device wouldn't resemble, nor take claim to the LEMA...and I'm sure Steorn would sell or license the LEMA technology (If I needed it for something.) for the right price anyway.  No one gets screwed Canadian cuz everybody has a price! =) My investment consultants are lawyers for the biggest alternative energy firm in the world! 

And Sean, this will be a commercial product. I could give the "cure for cancer" to someone and there is a 99.999% probability that it won't make it to market!

I could show you guys how I did it, but all that would really do is start confusion and controversy when some ego decides it was "thier idea".  Quite frankly, the motor is a buch of other peoples' ideas.  I'm sure in about 10 years, after I've already made a boatload of money off of it, somebody will put two and two together and try and sue me.  But today...nobody cares but me.  Maybe I'll get lucky and nobody will actually realize, or care, how I did it.  The consumer just knows that it does what they need it to and how much it cost them! The real important thing is who developes and sells it, not who patents it!  Who can get a fuel-less generator systems into homes the fastest!  The damn thing markets itself!!!!!!!    Besides, I wouldn't have to go to court, the lawyers do.  Don't think I couldn't hide enough money to go "bankrupt".  (You think Kenneth Lay  (Enron) is actually dead or broke?)