user TURBO?s replication of Steven Mark?s TPU ?

[starcruiser]

Thanks Giantkiller,


Also, if we are trying to stop electrons from moving maybe we should be using chokes which shouldn't stop the aether in the least.

aether22,

I believe this is why the control coils are wired as in the Tesla generator patent. They oppose each other. Now if we want power we do need electrons, so the question is, where do we want the electrons moving? In the collector, the feedback or the control coils? It is possible the radiant energy (or ether) induces the power in the adjacent coil(s). I admit we are still figuring this out with the TPU but we need to get it to work reliably then work out the physics of why.

Just my thoughts, I can be off base here but?

[giantkiller]

Welcome to the next step

Yo dudes, I got small Gyroscopy!!!!!!!!!!!!!!!!!!! Followed Ottos jumpers, pulse 1 freq 600hz in, put a Neodyn next to the freedback and I got vibes!!!!!!!!!!!! I try it next with 3 freqs.
What is diff is I have 4 feedback segments in series. I misinterpreted the Ottos layout.
EEgad, this is cool! And I truely believe it can be done sloppily. I have garden iron wire collectors, 26# copper magwire controls, & bifilar 16# speaker cable as feedbacks. I need more power.

There are 3 ON steps. Turn on circuit and scope shows no freq, but the magnets align slightly. 8 secs pass the scope line wiggles, then 1 second and freq displays, @ ten seconds the harmonic impacts show up with the hi spikes and the coils sing a glorious tune! You could achieve dissimilar results. But I believe u will see the whole process just ramp up. Turn it off. Then turn it on and watch it ramp up. When the harmonic kicks show up you see the spikes on the screen and u feel the vibes.

The secret is to put a neodyn mag on the inside of the coil. It you move it just a little off the coil to the center the vibes become stronger. I used the Magna buzz product off this sight(Shameless plug. Stefan, Do I get 3 days and 2 nights, all expenses paid as a Walmart greeter just down the street?).

--giantkiller. Follow me.....

[starcruiser]

GK,

Totally Cool!!!

Let us know what happens with 3 freq's. maybe a higher freq?

[AhuraMazda]

Welcome to the next step

Yo dudes, I got small Gyroscopy!!!!!!!!!!!!!!!!!!! Followed Ottos jumpers, pulse 1 freq 600hz in, put a Neodyn next to the freedback and I got vibes!!!!!!!!!!!! I try it next with 3 freqs.
What is diff is I have 4 feedback segments in series. I misinterpreted the Ottos layout.
EEgad, this is cool! And I truely believe it can be done sloppily. I have garden iron wire collectors, 26# copper magwire controls, & bifilar 16# speaker cable as feedbacks. I need more power.

There are 3 ON steps. Turn on circuit and scope shows no freq, but the magnets align slightly. 8 secs pass the scope line wiggles, then 1 second and freq displays, @ ten seconds the harmonic impacts show up with the hi spikes and the coils sing a glorious tune! You could achieve dissimilar results. But I believe u will see the whole process just ramp up. Turn it off. Then turn it on and watch it ramp up. When the harmonic kicks show up you see the spikes on the screen and u feel the vibes.

The secret is to put a neodyn mag on the inside of the coil. It you move it just a little off the coil to the center the vibes become stronger. I used the Magna buzz product off this sight(Shameless plug. Stefan, Do I get 3 days and 2 nights, all expenses paid as a Walmart greeter just down the street?).

--giantkiller. Follow me.....

GK,

I need more power.

Hold on I  call Igore!

I have garden iron wire collectors,

I partially went that way but in the video of SM where he was cutting the TPU, it did not seem like he was cutting any steel. May be that is when he needed the cutters. Anyway I stopped that thread of research then.

For those in UK, I recommend B&Q garden section for garden Iron wire. Just under ?5 for 100m.

Regards

AM

[giantkiller]

@Otto! and all the young dudes! I told this was sloppy! I put 3 feqs. and I have audible vibes What freqs? I did not even measure them. No Sh..!
12v in 130 out! Big ass spikes!
Otto, you're genius. Dave get on this dude. Push your 15". you might need power.
Ok, So there 5 new rules to add:
1: Place Noedyns inside 3 layer TPU.
2: If you need to adjust the freqs you must do it very slowly. Remember the ramp up!
3: if you see the hi spike harmonics you know the neomags are dancing and singing. Just like transformer.
4: When you turn on power you must time the space till the harmonics appear. That is the resonance ramp time of your TPU, YOUR TPU. They are all different. When you adjest any freq, the resonance ramp up time is the time you must wait. Screw this up and your in the dark permanently.
5: Put the scope on the top collector input between the resistor and the collector and watch the ramp up. Ok BTW. put your hand on the coil and feel the kick! I mean, this is a real kick. Dave? wear rubber gloves on your 15"

SM, how am I doing?

--giantkiller. Ok boys, chew on these findings a bit. Happy New Year, friends!