Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of this Forum, I am asking that you help him
by making a donation on the Paypal Button above
Thanks to ALL for your help!!


Talking about phase...

Started by bob.rennips, July 01, 2007, 08:16:56 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 17 18 19 20 21 ... 25
User actions

Super God

#90
July 19, 2007, 10:21:01 AM
I've taken pictures of mine, it's all wound and everything, the collectors, bias, and controls.  Just figuring out a good oscillator plan with the tubes I'm going to order eventually (money issues)
>9000

Bruce_TPU

#91
July 19, 2007, 10:25:03 AM
Hi Thaelin and All,

It is $34.95 per core with a minimum order of two.  If you or one of the guys want to go halves, on the two order minimum shoot me an email.  I have went halves with someone already.  ALL core orders must be placed ASAP.  Their next production run is August 8.  If an order is not placed soon, it will not be in this production run.

Core:  T650-52

Micrometals, Inc. Home Office

http://www.micrometals.com/contactus_index.html

Address:  5615 E. La Palma Avenue
Anaheim, CA 92807 USA

Phone:
714-970-9400

Toll Free in US:
1-800-356-5977

Fax:
1-714-970-0400

E-Mail:
sales@micrometals.com
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

tao

#92
July 19, 2007, 10:32:31 AM
Got my cores from http://alphacoredirect.com/

Which seems to be one of the ONLY easy-to-buy-from-online core manufacturer

A recent core I bought was:
Standard Toroid PN# L40
PN# L40    
$11.98 USD
4.870lbs
Epoxy Coated Toroid, Id=2.750", Od=5.250", Ht=1.125", 835 VA Relative Power Handling, 0.345 V/turn @60Hz, 15KG

Shipping was fast too and the core is very well made. They even make O-RING cores ;), and will even do custom cores for you at a very fair price.

starcruiser

#93
July 19, 2007, 01:01:16 PM
Quote from: Super God on July 19, 2007, 10:21:01 AM
I've taken pictures of mine, it's all wound and everything, the collectors, bias, and controls.  Just figuring out a good oscillator plan with the tubes I'm going to order eventually (money issues)

Why not try a simple blocking oscillator design using a small torrid from a PC power supply and tap that for your open ended primaries? I recall reading that you can build 2 blocking osc and have one track the other and by adjusting the time constant of one you can create a simple frequency divider which is sync'd.

here a a couple of sites that might be interesting to review.

http://139.134.5.123/tiddler2/c0508/block.htm

http://home.att.net/~pldexnis/CTC2_how_it_works/blocking_oscillator.html

http://www.vias.org/eltransformers/lee_electronic_transformers_11_01.html

http://www.electronic-circuits-diagrams.com/psimages/powersuppliesckt6.shtml

http://www.du.edu/~etuttle/electron/elect37.htm
Regards,

Carl

Thaelin

#94
July 19, 2007, 02:15:48 PM
I am good for one. I will even take the two if I have to. Now just to figure out where to get the wire. I will figure on using #20 enamel for the bias wind. Any pointers on where to get the silver coated #16 at?
That way I will be on the exact page when I fire it up.

The only diff here is I plan to use the tl494 plls. I have yet to ever get 555s to be steady. That should make the controller more stable and run a lot higher in freq. That into opto's into gate drivers and on to the mosfets should do the trick.

Thanks Bob B. for the clarify on the windings.

thaelin


Quote from: btentzer on July 19, 2007, 10:25:03 AM
Hi Thaelin and All,

It is $34.95 per core with a minimum order of two.  If you or one of the guys want to go halves, on the two order minimum shoot me an email.  I have went halves with someone already.  ALL core orders must be placed ASAP.  Their next production run is August 8.  If an order is not placed soon, it will not be in this production run.

Core:  T650-52

Micrometals, Inc. Home Office

http://www.micrometals.com/contactus_index.html

Address:  5615 E. La Palma Avenue
Anaheim, CA 92807 USA

Phone:
714-970-9400

Toll Free in US:
1-800-356-5977

Fax:
1-714-970-0400

E-Mail:
sales@micrometals.com
Print
Go Up Pages 1 ... 17 18 19 20 21 ... 25
User actions