Harmonic Oscillating Power Electric generator video

[BushWacker]

Hi Group,

   A quick note for anyone looking to further R&D of HOPE Tech. I have uploaded a pdf file in the "Material Supplies" catagory located on the home page of this forum. This file shows a chart comparing the various highly reactive electro-ceramic/piezo powders which EDO Corp., alone offers (http://www.edoceramic.com/). These are piezo nano-crystals which appear as powders but are among the most highly reactive piezo materials available to the public today. Look at the various uses for each grade of powder to determine the best choice for your application of it. I strongly believe that someone out there is going to become extremely wealthy by successfully applying these materials to our current MEG, HOPE, and other transformer type power technologies. Think about it and see if it doesn't make sense to you!! Just continue to keep it quiet and watch your backs guys.


Best Regards All,

J.D. Fauble

[mrl]

Hello,

I have been reading about this device but have not seen any drawings.  I have good lab in my home.  Scope, meters, function generator, tons of parts CAD package etc.  Lots of electronic experience.

I would like to contact the enventor.

I live in Canada.

Mike

[IronHead]

Hmmm interesting device you have here.

[BushWacker]

Please Note:

    I have been trying to post the following message for the last several days. Every time I try my browser is shut down. I will attempt to upload the final revised "HOPE for the Future" .pdf file under the subject heading "HOPE Testing". Therefore please check there for this file if you are interested.


Jim
-----------------------------------------


Hi Everyone,

    I appoligize for appearing to have disappeared. We have had some major problems with everyone being sick around here for the last 6 months. Numerous hospitalizations with pneumonia, blood poisoning, MRCA, abscessed teeth, etc.., etc.., and the folks need a lot of help getting along each day anymore. Anyway,........ I am attaching the latest and hopefully the final revision of the "HOPE for the Future" Construction, Assembly, and Basic Information paper for those who are interested. I completeing forgot to remove all mention of permanent magnets from the former copies and of course later discoveries showed that magnets actually serve no purpose at all in the HOPE Generator design.

I would also like to point out once again that I am not nor have I ever claimed that the current HOPE model is in fact a "Free Energy Technology", and I can only hope that people will make certain that they don't go telling others that I am making such claims. I visited Sterlings PES website just an hour or so ago and it appears that he has once again taken the liberty of mis-quoting me for some reason. I have been attempting to get through to Sterling by e-mail but once again my messages are being rejected so if anyone feels compelled please ask him to remove the claim of free energy in reference to my HOPE Generator.  For any of you who would like to contact me you can write me at jfauble@sbcglobal.net and make certain to write HOPE 4 Me in the Subject line so I'll know that it's not just spam.

It would be very nice to talk one on one with those who are interested in this discovery and I believe we might actually be able to make more progress than this environment allows. I would also like to take this time to say that despite the fact that Freedomfuel has been a bit of a thorn in my side at times that he has been right on about 90+% of everything that he's commented on in regards to his theories on why the HOPE Generator functions as it does. Freedomfuel you have a fairly keen insight on many things and you have been instrumental in giving me some idea's about where to go in redesigning future HOPE models to function even more efficiently. In particular your thoughts on rotating magnetic fields as well as the "Earthquake Lightning" theory are very perceptive and I believe that you have a very good understanding of what is going on to cause the results we are seeing in a HOPE Unit.

I have decided to make the newly revised "HOPE for the Future" paper available to this forum and a very few others who have shown genuine interest in this phenomenon. I only ask that you restrict this information to yourselves and other members within this forum unless you first ask for my consent to share it with others. Also, please remember that though I am not claiming that HOPE is a free energy technology yet it certainly appears to be closer to it than anything else I have seen in my 30+ years of research, and I am so sure that it can be further developed by using the knowledge gained through experimentation and some of the insights that perceptive people have already shown in this forum.

After many attempts to reproduce the claimed results of Tom Bearden's MEG Unit I knew that there had to be something wrong with the picture so-to-speak. Remember that permenant magnets are not required nor do they serve any purpose in the HOPE design, and very small audio signals can produce even higher voltages in a HOPE Generator than anything that has been claimed with a MEG. I have learned a great deal through the last 6 to 7 years that I've been building these kinds of devices and I think we now have much more solid information to explain the undependable results that have been reported by most MEG builders. Freedomfuel already seems to have a very good understanding of the physics involved and that is quite impressive to me since he has never had the opportunity to personally examine or experiment with an actual HOPE Unit. BTW Freedomfuel, I have signed out of the ISBP OS Project and if it is going to be reproduced someone else is going to have to head it up and fund it. I hope you are satisfied, and I completely understand your concerns as I have had the same concerns. To bad there are so many evil people out there who can only see weapons instead of the tools to heal that we could have.

I'd like to share something else with you all that I doubt that anyone here has considered. Does anyone know who Stanley Meyers is? I'm sure that some of you do. Stanley Meyers discovered a way to use high voltage (HV) at very miniscule current levels to split large amounts of hydrogen and oxygen from H2O instead of the other way around. Meyers used a ramped DC pulse frequency to accomplish this task. One of the reasons that I see the discovery of the HOPE phenomenon as exciting as I do is that I can see how Meyers technique might be employed using a properly designed HOPE Generator. It should enable a person to get by with using far less actual power to achieve the same results. Since a HOPE Unit actually opperates better or at least as well on audio signals, it isn't difficult for me to see how these two pieces of the puzzle might fit together. Okay, so some might say that the difference is that a HOPE Unit puts out AC when Meyers used DC. So has anyone ever heard of a rectifier? Well, it just so happens that one of the other things that I haven't mentioned so far is that there is another very nice thing about a HOPE Unit that should come in handy for this application. That is, When you rectify the HV AC coming out of a HOPE Unit you get the same voltage in DC potential. I know that some of you will probably call me a liar, and I know that thats not suppose to happen but it does with a HOPE Generator. There are a few other phenomenon and anomalies that myself and others have witnessed but I sure don't want to get into anymore arguments with someone who assumes that I'm either off my rocker or just some idiot who doesn't know what I'm talking about. Been there, done that to many times to count and you can't prove anything to someone who knows everything without ever seeing anything.

The only thing I don't like about what I see happening with a HOPE Unit is that no matter what kind of waveform you put into the thing, you always get a sine wave at the output end. So far I haven't been successful at remedying this and I would prefer to be able to see the same waveform coming out as I am putting into the unit. However, I'm confident that some of you already know how the waveform could be converted into a square wave, a triangle wave, or whatever without changing the voltage potential or current value to much. Unfortunately I'm no expert on microcircuit design and I admit that this has been my biggest problem in determining whether or not its actually possible to close the loop on any of my current models.

In closing I just want to mention that I have tried to post this message a half dozen times over the period of the last several days and every time my browser is shut down. I never have the problems that I have trying to surf or post anything anywhere else on the Net so whatever the problem is, it seems to have something to do with this site in particular. I've had so many problems with trying to browse or post anything here that I begin to stress out even before I attempt to log in. If anyone else is experiencing the same or similar things please let others here know so Stefan can look into it. Have a great week everyone and I hope that this information will help to enlighten someone at least a little bit.


Cheers,

Jim

[FredWalter]

If anyone out there wants my help in pointing them to various suppliers or for tips on anything I am more than willing to help.

Why not just post everything to this forum, so there is a public record of it?