Is Lindsay?s ?SM? a fraud?

[poynt99]

Remember SM's talk about the US Government visiting?  One of the men was from the Atomic Energy Commission.

So, there are no patents and there will never be any.  Capiche?

What's interesting is that SM still get's his check (small as it may be) from a company that can not patent of publicly sell the technology.  Hmm.  So, where does the money for SM's checks come from?  LOL! They sell it to the Dark Side - US Military.  They probably yank down some serious cash for a TPU.  Talk about "finanial gain" .... whoo hooo!!! Like hitting the lottery.  Develop advanced technology, sell to black world military programs, smile all the way to the bank.

Now suppose a few other companies got into the show.  Say maybe Boeing, Lockhead, Northrop, and (just for giggles) Airbus somehow got the goods (maybe they already have it) - how does that change things if at all?

The inability to find an SM patent on the controller does not preclude the possibility of their existence, or at least partial existence. Patent applications deemed "sensitive to national security" won't be granted, and will be classified. It is quite possible that the controller patents SM said were confiscated were in fact applications.

http://patentbaristas.com/archives/2006/12/06/is-the-government-keeping-more-inventions-secret/

http://www.law.cornell.edu/uscode/35/181.html

Poynt99

[wattsup]

@GK

Thanks so much for putting up that link to Pierre Luigi Ighinas theories, It has confirmed so many of my already notions of electricity that I told @sparks I was developing. He touches on it smack on. I will have to re-read it several times again. Electricity cannot "travel" in a circuit or in a wire. If something traveled that fast in a wire, then how could it just stop on a dime, or in this case at the last atom in the wire, from the known speed of electricity to zero speed. lol

@grumpy

Check this out. This article is dated only since August 19th, 2008 but it is no longer available expect with google.cache.
Skip down to the heading "About Ceramic Toroids and Inserts".
http://74.125.95.104/search?q=cache:DBUd9U6GAbMJ:digitalproducer.digitalmedianet.com/articles/viewarticle.jsp%3Fid%3D489651+%22ceramic+toroids%22&hl=en&ct=clnk&cd=9

While I am waiting for a 10 lb roll of 30 awg magwire, I did another test.

I took one of my already wound laminated core toroid coils that I wound the same number of turns as the FTPU toroid as a bucking coil. I put a simple two-way reed switch in the center and connected the reed to the two wires of the coil in parallel. I then applied 3-4 DC volts in parallel to these. I then positioned the reed near the coil that was receiving the dc and bingo, it started pulsing. It was pulsing simply because the reed shorted the coil that removed the field, that opened the reed, that unshorted the coil, that energized the coil, that closed the reed and shorted the coil again. Very simple pulsing. One reed, One toroid. What I think is the laminated core is not required at all and maybe a non-magnetic core or air core will work better and not push the coil into saturation mode. What is also fun about this is that the @allcanadian circuit can now be run without a relay since the toroid could act as both the coil of high induction and the center field so the internal reed will do the pulsing. Next trials. I also have the rings of the FTPU already done some time ago so I will try it tomorrow.

[otto]

Hello all,

a long time ago I made the ECD. It was fine working and lighted a bulb. With a high current. I thought "thats it" but my feeling said me thats not what I wanted.

Here is the answer to my question from Friday about cores in a TPU:

I made 2 TPUs: 1 with a core and the other without a core. Same coils.....

Result:

same signals, same current but the core gives the TPU more power. Much more power.

No, not overheating or something like that. Of course, Im not using iron because then I would have a heater, not a TPU.

What happens In a TPU with a core or cores. How do they work. Whats going on in such a TPU??

Then I thought about the controls:

Why said SM to cover all the TPU with controls?

The core material releases particles, as I call them from the beginning. Nonsence? Not at all. They are for real.
This particles are pulled out from the core and if the core is a magnetic material then the particles are magnetic and if the core is a non magnetic material then the particles are also non magnetic.

This particles are a little bit inert, "lazy" as I always say. They have a big kinetic energy, are very strong.
So, if you build a TPU tink just a little bit about my words.

Oh, I forgot, if you think that Im wrighting crap its fine. But I have the prove on my workbench.

Now, use a core, its not wrong. Plastic?

Why not. I never tried it but I think there would be many great discoveries.

As its boring  to light a bulb Im now working on a TPU that transmitts energy.                           

Wireless.

It works, of course.

About this I dont want to wright. I dont want to do a job for the profi researchers for free, ha,ha.

The point is that when I want to read really good research studies I would have to pay for it. Why?  They dont want to share. On the web you can only see the apstract. Now THEY can see only my apstract.

Otto

[bolt]

Why do you think so called "perpetual motion" and "free energy" devices are excluded from patent? The reason is simple, OU devices have been made and demonstrated many many times since the 1900's. In most cases the inventor gets murdered over it.  The governments knew it exists and one way is to exclude it so private individuals/companies cant have money and unitary control of the device. Not to mention all the other politics that go with it.  As mentioned many times patent means nothing anyway unless you have billions to go chasing everyone that breaches the patent so it was never in SM or anyone else's interest to patent the technology as that means disclosure.

Also under the US 1950 law anyone that brings about a proven change /deliberate act which leads to damage/collapse of the US economy is subject to life imprisonment. (except the FED they can do whatever they like) Such a device would instantly break this law. Owning such a device means you have free heating, cooling, lighting, transport and free water as you can make your own water and tell all these utilities and services to go to hell. Also you can irrigate, heat, cool your land to grow food.

Finally having access to free energy means you have power and political leverage and is EASILY weaponized!

People think it don't exist but a heat pump is already at least 6 times OU.    OU is nothing more then the transformation of energy and there are at least 16 methods. In the Bedini, Newman, RV etc the RE is nothing more then captured RF through stochastic coil resonance which automatically provides a gain of 1.618 * Q of the coil of which 0.32 can be extracted and looped under perfect matched conditions. Until now these systems have used a single frequncy and time compressed it but its not the most efficient method. Using multiple frequencies under Keely work invokes NSR- nuclear spin resonance and requires THREE frequencies. The combination of such an effect is what SM states as "Striking the Chord".

Todays 3  phase technology already goes a long way in understanding this behavior and the TPU is a 3 phase, three frequncy device to preform NSR -nuclear spin resonance which allows not just spikes of  RF but a FLOOD and the entire planet tries to plug the hole if left uncontrolled. Other effects which have been seen when you tap in 3D reported by many many others over the years include components getting freezing cold and anti-gravity effects which as time is gravity you get time distortion at high power. Increase power still more creates a time warp and time space also becomes looped but usually the device start flying before this happens!  THIS is why SM got a visit from the Atomic Energy Commission.  In fact it MAY not be true it may well be a cryptic clue because SM likes stories of TV's exploding etc these may be just bible stories in his teachings. By mentioning the visit from Atomic Energy Commission it gets you thinking well WHY would they be interested? what IS the link to the TPU and it don't matter if they turned up or not it tells you about  this suppressed technology.

There is no doubt the TPU is very advanced technology but simply built this is exactly what SM said it was. The point is unless you make a 3D device of least 2 collectors and 3 frequencies either derived internally as 3 phase configuration or feed in all three independent frequencies driven the true power and full effects will never been seen from one collector and one coil is in effect a bedini device. ie bang a coil get RF spike back simple.

Wiki ="NMR resonant frequencies for a particular substance are directly proportional to the strength of the applied magnetic field, in accordance with the equation for the Larmor precession frequency.

NMR studies magnetic nuclei by aligning them with an applied constant magnetic field and perturbing this alignment using an alternating magnetic field, those fields being orthogonal. The resulting response to the perturbing magnetic field is the phenomenon that is exploited in NMR spectroscopy and magnetic resonance imaging, which use very powerful applied magnetic fields in order to achieve high spectral resolution, details of which are described by the chemical shift and the Zeeman effect.

NMR phenomena are also utilized in low field NMR and Earth's field NMR spectrometers, and some kinds of magnetometers

In the Earth's magnetic field, NMR frequencies are in the audio frequency range. EFNMR is typically stimulated by applying a relatively strong dc magnetic field pulse to the sample and, following the pulse, analysing the resulting low frequency alternating magnetic field that occurs in the earth's magnetic field due to free induction decay (FID). These effects are exploited in some types of magnetometers, EFNMR spectrometers, and MRI imagers[2]. Their inexpensive portable nature makes these instruments valuable for field use and for teaching the principles of NMR and MRI."

magnetometers? Mmm another of SM teachings and what wiki dont tell you is if you do this right it unlocks untold amounts of power and energy.

[bolt]

After your strike the cord you need a way to increase the coil Q to be sensitive enough receive this signal.  One excellent way is quenching  by allowing oscillations to build up in the coil you slam it shut off then release it again and this allows more signal to collect on the collector. if you do this over and over the signal builds higher on the collector tuned circuit. This is super regen and you notice ONE frequncy which was pretty much standard through the TPU range is 6Kz and is the only common frequncy that is mentioned and is independent to the size of the TPU.  So SM used the same quenching circuit all the time as standard practice this was often the same principle for super regen receivers.  Without this the coil has a Q of say 100 and will never be good enough to capture a wavelength which is the size of the planet. With quenching it allows the Q of the coil to run to over a million! On each quench cycle notice we are TRANSMITTING via our oscillators and the receiver coil signal literally grows out into space and captures more and more of the magnetic energy. If we add stronger EM fields, they sum with the incoming EM plane waves and cause these waves to bend towards the tiny antenna, and the antenna absorbs them. This increases the antenna's EA (effective area, or effective aperture.) We can use this process to alter the coupling between the antenna and the surrounding space, but the total energy still follows the conservation law. The altered fields only change the "virtual size" or EA of the antenna.  In other words our loop has just grown massive electric ears and our 3D ball has got bigger!

So what did SM use to perform the quenching with then took me a while to work this out even though i mentioned super regen and quenching well over a year ago. The answer is a saturable reactor in electrical engineering is a special form of inductor where the magnetic core can be deliberately saturated by means of a dc current flowing in a control winding. Once saturated, the inductance of the saturable reactor drops dramatically.

Saturable reactors provide a very simple means to remotely and proportionally control the flow of ac current through a load such as an incandescent lamp; the flow of ac is roughly proportional to the flow of dc in the control winding. In this case its the toroidal thing on top of the tpu is a magnetic switch and is required to switch the loop on and off for quenching and runs at 6Khz. This allows the loop to be switched on and off without using semiconductors which would probably blow up due to the massive volts and currents involved.

By running coils as folded dipoles this Class C Magnetic Triode Amplifier (TPU) separate  and push electrons to each half of the dipole as explained in earlier posts. The result is DC with our quenching frequency sat on TOP -ie 6Khz.  SM described this in cryptic by discussing tube heater rectifiers and having 6 volts AC sat on top. The result is the same.

So its already established that RE is nothing more then RF and OU is energy transformation.  All you have to do is work out how to put this all together:)