Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



Solid State Orbo System

Started by Groundloop, January 06, 2010, 12:21:24 PM

Previous topic - Next topic

0 Members and 13 Guests are viewing this topic.

Print
Go Down Pages 1 ... 69 70 71 72 73 ... 148
User actions

Magluvin

#350
February 28, 2010, 11:17:12 PM
thats the biggest joule thief i have ever seen!  Just playin.  =]

but the stacking of the coils being never ending is interesting. Like the coils become 1 and the field is treated like 1 big pickup coil and the fields have to travel the full path to complete the field as one big singularity.

What are the ohms of these coils? have you tried paralleling them?

Mags

Bruce_TPU

#351
February 28, 2010, 11:28:09 PM
They are 253 ohms each. Brooks coils have some very special qualities not found in other coil types.   ;)   Joule thief today, SSG3 tomorrow...

Tomorrow I think I will wire all of them together in series, the outputs, remove the LED's and replace them all with one 12volt DC bulb, or two. 

Then I want to work on the tuned resonant LC tank... and capturing that bemf. 

I am really curious what a real electronic circuit will produce.  Once that is in place, the last thing to play with will be the power going through the bias.  But that will be the last thing. 

Of course, I do have a hankering for trying some standing waves inside one of these coils, just for kicks...lol no pun intended.

Any other ideas are always appreciated.

Cheers,

Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

Magluvin

#352
February 28, 2010, 11:50:09 PM
Try this if you will. Its easy and conclusive to my thoughts on those coils from what you just wrote.

make yourself a coil of 18 to 20ga of like 50 turns, and 2 in. in dia. Then try what you are doing with that. Treat it like an S2gen just for kicks.  Your current will increase by an order of magnitude.  The coils you have are too high in ohms for current. you can put 25v across one of those coils and the current measured there is about the best you will ever get out around that voltage. very nice coils, but better to have low ohms on a gen coil to drive things. If your input is 5v, you should get around 40 to 50v no load. If your coils were putting out 250v, then as you load it down, the current would be increased. and as it goes below 25v due to load change, the current would be more as the load decreases in ohms.

try it and you will be close to powering bulbs with just gen power without bemf added.

My goal is to get my output to around 18v with the little interior bulb and i will be at or near unity.  Im at 14.7v at about 250ma at this time. i get about a 1/2 volt increase with playing  just about every couple days, when i do work on it.

you will be happy you tried it. =]

mags

lumen

#353
March 01, 2010, 12:32:57 PM
Reading these posts, I wonder why no one has this thing working OU yet.
If the toroidal coil is actually unaffected by the secondary load (output coil) then this should be easy.
Simply wind the toroid and place the magnet in the center and connect it to the meter to get the inductance. Then using the inductance, select a good capacitor value to get a resonate frequency in a reasonable range, and connect the capacitor either serial or parallel to the winding.

Apply a frequency generator and scope and tune for optimal resonance.
Place the resonating toroidal coil into the secondary and measure the inductance of the secondary coil and set it up to resonate at twice the toroidal frequency using the same method as the toroidal setup.

The entire unit is now tuned to the best possible output and if not OU then this setup probably cannot work as an OU device.

synchro1

#354
March 01, 2010, 03:04:34 PM
@Bruce,

          The domain flip must trigger a scalar wave that is like a Tsunami in the Magnetic background tissue that the world around us is immersed in, output coils could theoretically be stacked to infinity! 
Print
Go Up Pages 1 ... 69 70 71 72 73 ... 148
User actions