Kapanadze Cousin - DALLY FREE ENERGY

[Utopia Now]

Hallo Void
On the Overunitydotcom  youtube video channel    you can find some video`s about he Akula Latern No. 3 device    http://www.youtube.com/user/overunitydotcom/videos
There you can also find a 40 minute video about the Akula Latern No. 3 device
http://www.youtube.com/watch?v=3GtDDQA3U4g&list=UUbcaIfmxRZhnnYVqG81kCZg

JohnBlade video channel on youtube also has 3 video`s about it   http://www.youtube.com/watch?v=7yJytHhudX8&index=15&list=UUa1rRk7Keewb1L0bJbPxNPg

In my online Prezi document ( attached picture ) you can find some more info about it. ( Schematic )
http://prezi.com/fiwgtl78it85/donz-device/      the online doc takes some time to load on your PC  but after 30 sec to a minute  you can zoom and drag or push the > button   in the DonZ Device Prezi document.

This is where i found some info also on the RealStrannik.ru forum    http://realstrannik.ru/forum/49-teoriya-andersena/28770-naglyadnyj-effekt-se.html?start=864#212027

[d3x0r]

Re Dally GNSI (generator nano-second impulses)

There IS such a thing as a nanosecond generator, litterally a pulse in nanoseconds, but it's not just A part, it's a system.  This works in not a few nano seconds but 10's to hundreds of nanoseconds, but is sub-microsecond.  Although there are writups that a similar choke/cap system can be used for sub-nanosecond UWB (ultra wide band) transmitters.. the DSRD is the final peice that makes the hundred-nanosecond pulse through the coil turn into a few nanoseconds.

The  74HC(T)00 pair is just an oscillator, like a TL494... but with a fixed narrow duty cycle and lower power requirement.

the first 74HC00 is a self osccilator with tunable freqency, and short duty cycle output.
The secon 74hc00 is a pulse chopper, it takes only the leading edge and outputs a pulse... as long as the input remains high it continues to be low.  This can be done with like a JK flip-flop also.

The third part is the transistor which is driven by a narrow pulse (several microseconds width).  WHen the transistor conducts, the energy in the capacitor near it is dumped through the toroid transformer.  Because there is a choke between that capacitor and the real 150V power storage, it takes a short time before it conducts... thereby starving the current through the toroid transformer and effecitively generating a much shorter pulse of output.

The oscillator part can just be another TL494.
A pulse chopper can be made using a pair of mosfets instead with a short RC constant between their turning on; but may not be required if the 494 is used with short duty cycle instead.

The tuning of the capacitor size and choke determine effective output.  The transistor/mosfet driver will be open for a longer time than the output generated through the toroid.

So through a system of parts a narrow pulse is truncated to just the leading edge of the pulse, and that is fed to a transistor, none of these actually work in nanoseconds but actually in microseconds.  What ends up generating a short pulse is a limited power supply with a blocking choke.  Once the transistor stops conducting, the 150V power supply recharges the supply cap at some time after as the choke allows it to conduct.

Clear as mud still?
---
DD2 is 'side 1' and DD1 is 'side 2' ... forgot to remove some labels.... reading from left to right is 1 and then 2.
---
Additional note; the cap used should have a low ESR so it can be filled quickly and get maximum current for the shortest time through the toroid transformer

[Void]

Hallo Void
On the Overunitydotcom  youtube video channel    you can find some video`s about he Akula Latern No. 3 device    http://www.youtube.com/user/overunitydotcom/videos
There you can also find a 40 minute video about the Akula Latern No. 3 device
http://www.youtube.com/watch?v=3GtDDQA3U4g&list=UUbcaIfmxRZhnnYVqG81kCZg
JohnBlade video channel on youtube also has 3 video`s about it   http://www.youtube.com/watch?v=7yJytHhudX8&index=15&list=UUa1rRk7Keewb1L0bJbPxNPg
In my online Prezi document ( attached picture ) you can find some more info about it. ( Schematic )
http://prezi.com/fiwgtl78it85/donz-device/      the online doc takes some time to load on your PC  but after 30 sec to a minute  you can zoom and drag or push the > button   in the DonZ Device Prezi document.
This is where i found some info also on the RealStrannik.ru forum    http://realstrannik.ru/forum/49-teoriya-andersena/28770-naglyadnyj-effekt-se.html?start=864#212027

Thanks!

[d3x0r]

Does anyone know if Akula posted a schematic anywhere for the attached LED 'lantern' circuit?
Can a decent copy of this schematic be found anywhere? I want to try to experiment with this circuit
if I can find a schematic. This is the Akula self running eight LED lantern circuit with the large square shaped ferrite core on it.
Thanks...

Added later: Ok, I found this thread, which has posted schematics, but it seems it was not certain
what the exact circuit was, as Akula apparently didn't post the schematic for lantern 3.
http://www.overunityresearch.com/index.php?topic=2420.0
I may look into the Lantern 4 circuit instead since Akula apparently posted a schematic for that circuit.

http://www.overunity.com/14610/akula0083-light-no3-dual-tl494/#.U9GGCPldV48

[Void]

http://www.overunity.com/14610/akula0083-light-no3-dual-tl494/#.U9GGCPldV48

Thanks!