Kapanadze Cousin - DALLY FREE ENERGY

[AlienGrey]

Dear Jeg.

Are you sure that's a Thyristor? Where's the gate? And there's no indication on the schematic of where the trigger signal comes from.

A Zener perhaps?

Cheers Grum.

it's just an old diode out of the junk box, and the depletion layers got a bit bent ! Also this device from the 6/70s era https://en.wikipedia.org/wiki/Tunn

Grum while your on what do you think about grenade coil is it 1 standing wave or 14 x 1/4 ? and if so what of the other coils ? T1000 can you please explain ?? over to you !

[Grumage]

it's just an old diode out of the junk box, and the depletion layers got a bit bent !

Grum while your on what do you think about grenade coil is it 1 standing wave or 14 x 1/4 ? and if so what of the other coils ? T1000 can you please explain ?? over to you !

Dear AlienGrey.

My experience with the grenade is limited to " Fallout 4 " !! 

I can't help you there as I tried to replicate Akula's MK 2 device and also the Chibinidze device both seemed to have an internal choke " drossel " but no grenade style coil.

With my Akula demo I was reading 10 Kv p/p at roughly 75 kHz on the internal 650 turn coil. Plenty of free electrons for the taking !! 

Cheers Grum.

[AlienGrey]

Dear AlienGrey.

My experience with the grenade is limited to " Fallout 4 " !! 

I can't help you there as I tried to replicate Akula's MK 2 device and also the Chibinidze device both seemed to have an internal choke " drossel " but no grenade style coil.

With my Akula demo I was reading 10 Kv p/p at roughly 75 kHz on the internal 650 turn coil. Plenty of free electrons for the taking !! 

Cheers Grum.

one Russian site describes a Tesla device with the inner coil set at a 1/4 wave of out side coil or 1/2 wave for out side coil. if that helps. ref Ruslans page if its still on

[Jeg]

Hi AG
Thanks for the answers. 

Why you bother with quarters? As Akula said just calculate your grenade as the first two layers to be the half of the total length. Then 3-4 layers start from the middle of the first two. This way you make the ends of each layer of the 6, to sit on a node.

Thanks Grum
There is a notification right next to this component showing a 0-300Hz range. So i guessed that he is talking about a thyristor, discharging the output dc/cap at more useful frequencies.

[AlienGrey]

Hi AG
Thanks for the answers. 

Why you bother with quarters? As Akula said just calculate your grenade as the first two layers to be the half of the total length. Then 3-4 layers start from the middle of the first two. This way you make the ends of each layer of the 6, to sit on a node.

Thanks Grum
There is a notification right next to this component showing a 0-300Hz range. So i guessed that he is talking about a thyristor, discharging the output dc/cap at more useful frequencies.

I didn't design the coil but as i said one of the Russian guys explains how it works and Tesla used a 1/4 wave inner coil and a half wave outer coil or you can use full wave, in Ruslans coil 12 + 12 is 1/4 + 1/4 and so on but he does not explain how to add ccw or cw winds or how to deal with them he used a different technique we need to ask T1000. but 12 t = 1/4 wave  24 t = 1/2 w 48 + full wave got it ? the problem is still a problem as now you don't know how many waves you have in the grenade so you don't know the length of wire to use in the katcher, confusing or what ?