Reactive power - Reactive Generator research from GotoLuc - discussion thread

[wings]

Thanks Hob for bringing my attention back to the need of the Mot.

I don't know if you or anyone else of the Forum remembers a man about 5 years ago was posting about a circuit he had develop that was using only capacitors to achieve a large reduction in power usage when his circuit was under load. I think he was Indian. He had a video demo with a wheel power meter to demonstrate the difference between a load in the standard way vs his circuit.

Maybe this was his basic effect?... HE NEVER SHARED HIS CIRCUIT

Thanks again for sharing

Luc

winsonali electrogenie this ?
http://www.youtube.com/watch?v=4sqmq9i-tos

http://www.youtube.com/watch?v=LoAmtkHkDzI

http://www.winsonali.com/index.html

[lancaIV]

soft static/motive driver technology( also Frank Nola controler) included inrush current limiting makes part of the LC-tank-circuit optimization.


My response was "current limiter" related,cause sur-current saturate the conductor to fast =resistance I and seconds heats(=vibrations) it up to fast =resistance II !
We need a "cold" conductance.


Sincerely
              OCWL

[gotoluc]

winsonali electrogenie this ?
http://www.youtube.com/watch?v=4sqmq9i-tos

http://www.youtube.com/watch?v=LoAmtkHkDzI

http://www.winsonali.com/index.html

Yes wings, that's the one.

Thanks for finding it

Luc

[hartiberlin]

Hi All,
I think these Russian inventors have already mastered the technolgy and can offer
a 10 times power amplification via reactive power and resonance in tis unit.

Have a look at this:


https://www.youtube.com/watch?v=1hCkwWhIyvc

Regards, Stefan.

[wings]

Hi All,
I think these Russian inventors have already mastered the technolgy and can offer
a 10 times power amplification via reactive power and resonance in tis unit.

Have a look at this:


https://www.youtube.com/watch?v=1hCkwWhIyvc

Regards, Stefan.

the max allowable reactive power should be within 90% of active power

INPUT
1260 Watts and 3000 VAR -
3300 total input power V*A (200 Volts 5-6 amperes)

cost (3.23*1260 + 4.21*3000)/3600= 4.6 centEuro (KV*A*hours)


OUTPUT
9080 Watts and 165 VAR
9100 total output power V*A (220Volts 13.5 amperes)

cost (3.23*9080 + 4.21*165)/3600= 8.4 centEuro (KV*A*hours)


amplifications of 10 times active power 3 times full power - not bad