Partnered Output Coils - Free Energy

[EMJunkie]

Chris,
I just had another read through your document here:
http://www.hyiq.org/downloads/guidelines%20to%20Bucking%20Coils.pdf
It'll be an important reference in my digital library. Thanks for your generosity in sharing the fruits of your research and bench work.

I have a question --
With opposing coils side-by-side on a single core, can we say that there's a concentration of dielectric convergence between them?  And is this essentially what enables this configuration to put out more that what goes in - by essentially stressing the dielectric and forcing it to respond (from without) with its own charge?  If this is indeed the case, then this config would constitute an open system, would it not?

Have a wonderful Christmas.
Bob

Hi Bob - I cant prove it, but yes I believe so!

In this video here: Opposing Magnetic Field Interactions - Partnered Output Coil - I show how Magnetic Fields Interact together. As one Opposes the other the area where each Magnetic Field Opposes becomes a High Stress Area where the Total Electric Field Integrates over all. Why? because the Forward Momentum of Hysteresis of the Core is Assisted by the Reflected Magnetic Field of Lenz's Law, which is the Current Draw on the Secondary.

As a conceptual Illustration. (In an Ideal Transformer!)

Imagine 1 as the Input. Imagine 1 as an Output.

Normally we would see 1 + -1 = 0, where our 1 on the Input becomes the 1 on the Output and we have nothing left over. The Negative Sign is Lenz's Law, Output Opposing the Input.

Now what we are doing is, 1 + -1 + 1 = 1, where our 1 on the Input becomes the 1 on the Output, but because we are using Lenz's Law to "Generate" or Separate more Charges. See: Reply #6576 for detail on how!!!

The third (1) in 1 + -1 + 1, simply comes from Electromagnetic Induction. Its the same as the Electrical "Generator" that powers the everyday Appliances we use. Nothing new, nothing that is not already very well known!!! All the same rules Apply!!!

So our Forward Force is being acted on by the (- Lenz's Law) but as Lenz is also a Changing Magnetic Field Equal and Opposite to the Source Magnetic Field, we also redirect part of this back to Assist the Input Action, thus reducing the Negative Effects of Lenz's law on the Input!!!

Thus my quote:

P.S: Why is Three the Magic Number? Action, Reaction and Counter-Reaction... Newton's Laws of Motion...

This is a Feed Back Loop that simply by Drawing Current, more Force is exerted on the Charges in the Wire Conductor, thus Separating more Charge. From Floyd Sweet:

Electromagnetic in nature, responding to a polarizing force, also magnetic in nature, produce, by moving fundamental charges in a conductor, the moving charges polarizing effects that align the quanta energies into a coherent state. Once in this state, the moving charges initiating steady states of the electromagnetic field are opposed by opposing forces equal in magnitude and opposite in direction and a property of the space field. Thus, the moving charges on the electrons that excited the space field into being surrounding the electromagnet are not moving as a source of current flow, but lock the quanta in a coherent state of potential magnetic energy whose effects are evident and energy is there to be converted by unique hardware

When you look at a Core Material, I believe it very important to look at the Magnetic Field and the Magnetic A Vector Potential as a Dynamic Source of Induction!!!


   Chris Sykes
       hyiq.org

[EMJunkie]

Sometime back I posted this Post:

I will again reiterate, simple...

Newton's Laws of Motion - From a Primary Input Coil, to a Secondary Output Coil - Listen Carefully!!! Pay Attention!!!

Now think Imbalance - Feed Back. Counter acting the Forces!!!

If you watch this, pay really close attention, then we can see where the Forces are situated. Transformer Theory and Newton's Law's of Motion!!! This is a very good video, if you have the patience to sit and listen to it.


   Chris Sykes
       hyiq.org

[Bob Smith]

Nice post, Chris. I agree there's nothing unscientific about this configuration's great performance.

Happy Boxing Day
http://fastdecals.com/shop/images/detailed/10/boxingkangaroo01_animalFC.jpg
Bob

[EMJunkie]

Nice post, Chris. I agree there's nothing unscientific about this configuration's great performance.

Happy Boxing Day
http://fastdecals.com/shop/images/detailed/10/boxingkangaroo01_animalFC.jpg
Bob

Hi Bob,

I could not agree more!!! There is nothing Magical or Mysterious or Mythical to straight forward Science!!!

The field of Breakthrough Energy Research has been molested and manipulated by so many brainless goons throughout History that no one even knows how basic Electromagnetic Induction works anymore!!!

In the late 1800's, early 1900's, Induction was widely known, a lot of work was done to further understand Electromagnetic Induction! I quote from perhaps one of the most famous of all Breakthrough Energy Researchers:

An electrical generator is, in the true sense, not a generator, as it does not create electrical energy. Electricity is not made by the generator, it is merely pumped. From that standpoint, an electric generator might be referred to as an electric pump and the Moray radiant energy device as a high-speed electron oscillating device.

To account for the propagation of heat and light — that is, of radiant energy — man has postulated the existence of a medium filling all space. But the transference of the energy of radiant heat and light is not the only evidence in favor of the existence of such a medium. Electric, magnetic, and electro-magnetic phenomena (and gravitation itself) point in the same direction.

Ref: T. Henry Moray - The Sea of Energy in which the Earth Floats

All these self proclaimed Breakthrough Energy Researchers that turn simple Electromagnetic Induction into Mystical VooDoo BS Science when they don't even know how Simple Electromagnetic Induction works in the first place, has absolutely destroyed any possible progression of the Human Race!!! These people should be locked up, have the key thrown away!!!

People that Mystify, or turn Simple Electromagnetic Induction, a very old Scientific set of principals (184 Years Old), into anything but Simple Electromagnetic Induction, are simply not helping anyone and are in fact hindering the progression of the entire Human Race!

So look for them, they are the one's to put on the Ignore List!!!

My advice, stay well away from anything that looks like this: Breakthrough Energy Coalition


   Chris Sykes
       hyiq.org

[wistiti]

Hi guys!
Here is a fun an easy project to play with.
(here a copy of my comment in an other forum)

SLOW POC CHARGER

Hi guys!

Today i have some spare time so i decide to play a bit with these POC.

After reading some old post, i decide to test what some folks here said about a kind of capacitance may happen between the primary coil and the POC . I mean here the distance between the primary and secondary .

I also tough about what some people think then the magnetic field must be better under (inside) the primary than over...

So i decide to re-do the first module i have done on the top of this tread with that concept in mind.

I use an 8 cm ferrite rod i have found in a old radio. I wrap the POC on it with 20 AWG magnet wire (4cm each coil). I wrap a 18AWG speaker wire over it (the thick insulation may do the job for the capacitance...) I secure the outside with tape.

The primary is drive by a blocking oscilator (joulethief). The transistor is an 2n222, the resistor is 1350 ohms.

The output (POC) is conect the midle together and the end together. The both midle go to one ac of a homemade 1n4148 bridge rectifier and both end of the POC go to the other ac of the bridge.

The - and + output go to a 16vdc 22000uf cap. I also use a 1n4007 blocking diode on the + of the cap for the final output.

I decide to use it for charge battery.

For now the result is quite interesting...

My source battery is 2xaa 1.2vdc 1900mah nimh in serie.  My charging battery is 12vdc 7.2ah lead acid.

At the start (battery not connected) my reading is: Source--2.506vdc     Charge--12.30vdc

Now (3 hours later) my reading UNDER LOAD is: Source--2.406vdc     Charge--12.43vdc

I will let it run for till tomorow and let you know about the result...

It is slow; but it seem efficient!

Happy holiday for everyone!

ps.: Thank you Chris for doing the circuit drawing.