Partnered Output Coils - Free Energy

[EMJunkie]

Here is my bucking field HHO circuit--simple as.
Oh,and you also get 240 volts to run lights

https://www.youtube.com/watch?v=ZyW4dR4cUQM

NICE Work Tinman!

   Chris Sykes
       hyiq.org

[EMJunkie]

Hi guys,

I have only been active on this forum for a couple of months now although I actually joined a few years ago.  I became active here after several years at the Erroneous Forum.  I  just got tired of the silly babble over there.  I have worked in electronics for over 50 years so I can tell the difference between silly babble like a lot of what is on the EF.  I also can easily spot those that are actually working hard to try and learn and make a difference.  Since I have been active here I have found at least 4 members whose posts I just ignore.  It is obvious they are here for only one reason.  That is to discount everything they are against.  It doesn't matter how reasonable an idea is if they don't like it they will try to shout it down.  I just ignore them.  I don't have a problem with those that ask questions if those appear to be asked for the right reasons.  Those that harass others that are trying to accomplish something will get their due eventually.  If you don't respond at all to their posts maybe they will go away.  At least the thread wouldn't be filled with their nonsense.  Keep up the good work and ignore the naysayers.

Respectfully,
Carroll

Hi Carroll - Fully agree! We really do, me especially, need to ignore those that simply are time wasters!

Their intentions are to simply fill the thread with Garbage, its what they do best!

   Chris Sykes
       hyiq.org

[EMJunkie]

I just love Christmas! Christmas Lights, Christmas Cake, the joy of giving, and Christmas Cheer!

Although a stressful time of year for many, sadly... So many have so little these days! Poverty is at an all time high, the statistics show that more family's now are at worse than the great depression standard of living.

This is the time of year of giving, I ask those of you that can afford it, please give this year to the needy. There is no need for Greed!

   Chris Sykes
       hyiq.org

[EMJunkie]

@Tinman, you up for a little topic changer?

@All - I made a statement a few posts back, and have made it many times in the past. Maybe no one quite understands it?

The Key, I have said it many times: Note: Importantly, for this device to work, Current must be flowing in the Partnered Output Coils! - Page 23 Guidelines to Bucking Coils

.

Ok, so lets talk about this? Lets start asking questions, see why this is important!!!

   Chris Sykes
       hyiq.org

[digitalindustry]

@Tinman, you up for a little topic changer?

@All - I made a statement a few posts back, and have made it many times in the past. Maybe no one quite understands it?
.

Ok, so lets talk about this? Lets start asking questions, see why this is important!!!

   Chris Sykes
       hyiq.org

to me it depends on what you mean by the word:

"flowing'

if you pass a 'voltage' into an inductor you induce a magnetic field, if this goes from 0 to X then you could say that the flux is 'flowing'

but what i thought you meant was that you have to pulsate magnetic flux though the coils at A freq say (Freq Y) etc?

is this what you are saying?

i.e you can use pulsating 'DC' or 'AC' rectified or natural 'AC' (I call it rotating) at certain freq but not 'DC' (i call it non rotating)

what we are calling 'AC' is a 'rotating mag flux.' so maybe we should rename it 'RmF' in future.


i'll be honest with you i don't know what a 'Volt' and a 'unit of current' really is, except the vectors of a 3D pulse of magnetic field.

maybe best understood as 'spacial' and 'counter spacial' like the vortex in a magnet out from the center field.

as stated by the writer of 'hidden secrets of magnetism' you can cut a magnet infinity amount of times and the center of this field will always balance.

Summary (sorry for rambling)


I think you are saying there has to be a fluctuating mag field in the opposing inductors so that the fields create a disturbance.

next issue would be at what freq.

A good relevant example might be Tinman's HHO

i think that the cap is charging and then firing the spark this causes the cap to discharge the field, the coil is shorted then un-shorted right?

however this is really and on/off effect (as i see it) at the point of spark the coil is 'shorted' through the Cap but the cap discharges the field in the HV coil collapses and pulses the primary coil.

so to relate that to your statement, when the spark was not induced there was a 'current flowing' but only at the freq and amplitude of the motor when the spark started to modulate the 'current flow' the HHO also started to 'flow' 
: D


if you look here :

http://overunity.com/14583/the-so-called-don-smith-generator/15/#.VmOmv17p-uk

people are asking why the Spark gap is positioned in the 'Don smith' system in series with the LC.

well for me it is like this, to understand.

- people think the Neon tube it providing the Freq  not true.

- The spark gap + Cap is providing the freq.

- the neon-tube is at a high freq but this is just as a consequence of the design and high voltage.

- Don even called the Cap a 'Tuning Cap' tuning what?  the freq obviously.

the coil is important but fixed, you can tune the Freq to the coil by the Cap and the Spark gap (mostly the cap)

Tinman has basically made a type of system similar here and that's why the light provides no load, all credit to TM this is his own native design such is the way of Australian ingenuity ; D