Partnered Output Coils - Free Energy

[The.Truth]

Now you had people off drilling holes in the stator housing, trying to fit permanent magnets: https://www.youtube.com/watch?v=u3nWWtmPq6I

It was all lies!

You led everybody to believe this image was what was required:

but look, you were caught you lieing again: 3 x 2 + 4 x 2 + 3 x 2 + PM Diameter + some windings diameter = NOT going to fit....

[tinman]

Now you had people off drilling holes in the stator housing, trying to fit permanent magnets: https://www.youtube.com/watch?v=u3nWWtmPq6I

It was all lies!

You led everybody to believe this image was what was required:

but look, you were caught you lieing again:

Actually,you slipped in your own shit again.
That image is correct for the small RT.
Have you actually read the notes on that image?
Note that there are no bucking fields between two coils,but only the neutralization of the PMs field by the PM core winding.

Oh you are so mixed up there junkie 

[The.Truth]

@tinman,

You are pulling at straws.

No other rotary transformers were shown at the time of you posting this image: Tinman's coil shorting circuit

Penno started that thread specifically about the RT shown in the above videos. Penno64 even posting an image of the exact same RT PCB. The RT, the RT in question, IS the same one in question.

More lies!

You lied to penno64, gyulasun, shylo, and more, every person that read that thread!

You are a Compulsive Liar! Pathological lying is your trade mark!

[tinman]

Now,speaking of lies--
Post 1 Quote Chris: This thread is for those interested in moving ahead with Free Energy!

Post 7 Quote Chris: I agree. Energy can not be created or destroyed. You and I agree with Science on this one!

Post 8 MHs copied picture of Chris's COP 1.7 weapon.--pic below.


Post 134 Quote Chris: This thread is NOT to discuss Measurements on this device! 


So first Chris says were going to move ahead with a free energy device

Then he says that he believes energy cannot be created 

Then we see his !claimed COP 1.7 junkie generator

Then Chris says that this thread is not about discussing power measurements.
This was of course !after! his AC coupling blunder 

So the thread is about building a free energy machine,where the claimant (Chris) also admits that energy cannot be created,but then presents a device that has a COP of 1.7 

Once you build this COP 1.7 device,where the designer (Chris) admits that energy cannot be created (but still has a device with a COP of 1.7),you may test your device,but you may not take or discuss power measurements 

More on the AC coupling issue

After many EE guys here told Chris that he should be using DC coupling,Chris's response was
Post 94 Quote: Scope was AC Coupled @10 per div. The Output is AC on this device, not DC. Input is chopped DC, Bi-Polar via a H-Bridge, which is also considered to be AC, just a AC Square wave.          

Quote Chris post 97 : It depends on the setup. If the Output is AC then AC is needed on the scope. Vice Versa.."In alternating current (AC), the flow of electric charge periodically reverses direction." - A H-Bridge can Chop the DC and the flow of electric charge periodically reverses direction.
This is just common-sense, so please don't try to confuse others here!.      

Anyway,in posts to follow,TK tried to explain to Chris quite nicely how the AC and DC coupling on a scope work,and when to use each.

Chris's response was
Quote post 108:
@TinselKoala,

So you're saying that perhaps the most accurate instrument that Human Kind has ever designed and built, with many decades of refinements, cant be trusted because of a high-pass filter that filters out DC components?
My Frequency was 394.4Hz - Really!!!
My Output was AC!
Go away, you're being stupid!
This information you have provided does not prove a single thing except that you have read the references! It certainly does not prove any measurement error! Besides, like I said, I am well past my second device now. This is now old tech for me. Its what I have decided to share with others!
Stop wasting everyone's time and distracting others! Let others work and get on with things!
Go and take pictures of your scope and stop bothering us!

Post 111
Quote Chris:   And thus you display your true arrogance and ignorance!
Go away TinselKoala we don't want you here!
Go and setup a "Why Scope's don't work" thread!

Post 114
Quote PW:
As TK has stated, it's not the 'scope, it's the operator.
You really should take the time to learn why your 'scope should've been DC coupled instead of arguing with and insulting those that are trying to teach you something very basic about using a 'scope.
When you do figure it out, you will realize how silly (and arrogant) you are being...

Post 115
Chris's reply to PW
Yes, knowing how to use a Scope is important.
Measuring AC with AC Coupling is NOT Wrong! To suggest so, is only words of someone that has nothing better to do! Its really ridiculous!

Now we have the junkie trying to tell a well seasoned EE that he is wrong lol.

So there you have it--the truth right here on this thread.
Chris shunning those that chose to help him learn how to use a scope correctly,only later to have Chris blame everyone else for his departure,due to them treating him unfairly 

So build Chris's POC guy's,but what ever you do--do not take any power measurements.
If you cannot help your self,and must take power measurements--PLEASE USE AC COUPLING ON YOUR SCOPE.
This will guarantee an OU/free energy device result every time--even though Chris clearly admit's to the conservation of energy 


Brad

[tinman]

@tinman,




More lies!

You are pulling at straws.

Thats !clutching! at straws Chris--not pulling.

No other rotary transformers were shown at the time of you posting this image:

Thats right gumby.
That was the first circuit for the small RT
Your point being?

Penno started that thread specifically about the RT shown in the above videos. Penno64 even posting an image of the exact same RT PCB. The RT, the RT in question, IS the same one in question.

Once again--your point is,and your accusations of lie's are?

You lied to penno64, gyulasun, shylo, and more, every person that read that thread!

No,i never lied to anyone.
What i posted is correct.
It is only your small brain that cant put it altogether Chris.

You are a Compulsive Liar! Pathological lying is your trade mark!

And here you are,posing as some one you are not,going to make a film that will never be made,writing a book that will never be written,and lying about being given monies you never received to do it all.

Film crew my ass. More like a blowhard mate walking around behind you with an old super 8,taking movie of dragons in the kitchen that dont actually exist.

Lets face it Chris,you have been trying for years to get your hands on my RT design.
You have been trying for years to try and work it all out--but you just cant.
You have watched those video's over and over,trying to see how it could have been faked,but you cant--you cant because the results on the video's are actual results,and you have no device that matches those results.

This all has gotten the better of you,so you come back here,trying to get what you need from me,so as you can try and make your device work--which it never will.

It's time for you to walk away,and leave those that know how to, and want to, take power measurements of devices built here.

You just cant start a thread promising a free energy device,and never deliver on that prommis.
You cant treat those who try to help you like dirt,and expect to be welcome here.
You only have to read the thread to see that you made enemies here long before i even posted.

Time to grow up Chris,and accept the fact that you are your own worst enemy.


Brad