A3C & X-MAGNETS AND PMF.

[ageofmagnetizm]

I am actually prepairing to move on my R&D and vaction,
and this discussion will be suspended and comments will be disabled.


If somebody still want to through chairs, chanting same loud slogans,
than do not restrain yourself, post everything what you fill.


I'll simply ignore radicalized minds.
Go on enjoy filling yourself important.

[gyulasun]

Farewell to ageofmagnetizm:

Taras, after reading your reply (quoted below),  it immediately became crystal clear you have nothing special
but a salad of words, deceptive blog pages and videos and your generator surely has less than 100% efficiency.

Hopefully this thread will serve for the benefit of any honest but technically not very well educated readers here,
either members or occasional lurkers that they should keep away from the generator this guy ageofmagnetizm
may come up with again in the near or remote feature.

He demonstrated very well how a voltmeter should NOT be used when doing a load test at the output of a
generator: he connected the voltmeter, a DMM in series with the load.

Just imagine how small AC current was able to flow in the otherwise 500-600 W load when the high internal resistance
of the voltmeter in series with the load effectively reduced any current flow to as low as some nano or microAmper.

Yet he claimed his generator has a hyper efficiency of 1000%.  LOL   
His blog pages, his videos attempt to make you believe the load really loads the generator output but in fact it was
quasi isolated by the voltmeter's high internal resistance.  LOL 

Bye-bye Taras, bye-bye!

Carroll,
Inputs are taken from information provided by manufacturer of drive as follow:
Accu marking and manuals say 10.8 volts 1.5 ahmpers and 16.2 watts maximuums,
and shaft 15 N/m max.
Voltage and resistance are displayed on DMM and one can interpreting them as wishs.
Videos were releasing to produce increasing pressure on potential partners which were
targeted by personal emails (not on forums), once targeted objective are achieved then there
no need to release valuable information and betrade trust of partners.
Hence I have neither reazons no right to release anything else other than sheduled by ongoing R&D,
Hence I only can discuss what is already published and can not discuss what will be published later.
Before this discussion was interrupted for two weaks, - on many discussions were suggested
that if loads will be connected to generator than currents of stator wil induce magnetic fields deccelerating
magnets of rotor hence applayed drive will be slowing RPM because of insufficient power input.
Videos showing testing with different loads have produced sufficient prove of conception on
doesends of dicussions except here...
If gyulasun refuses to provide his credentials personally than his status remains unchanged
and I shall ingnore his posts as I ignor adds surrounding posts which are valid, hence:
GYULASUN -- PLEASE STOP POSTING HERE FOREVER. NEVER POST HERE.[/size]

[ageofmagnetizm]

https://m.youtube.com/user/gyulasun/feed


https://m.youtube.com/watch?v=YR5ApYxkU-U

[gyulasun]

ageofmagnetizm:
I knew you would love me ...   
I like Pink Floyd by the way.

[ageofmagnetizm]

Screen shorts are evidences, as many other things are.