Real overunity transformer with ancient technology

[AlienGrey]

Which are the costs for a shelter/area cover/ tent ( ~ Yurte/Tipi-Igloo) in Colorado/USA ?
With air conditioning sourced by ' real overunity transformer' ?

archive.org  : www.shelterdomes.co.uk       shelter in dome-style based by bubble foil
When by 20° K amplitude 2000 Watts heat energy need then by 40° K 4000 Watts heat need for 25 sqm/ 270 ft
useable ground area ! 

40 ° K amplitude based by Boulder 21°F Dec. average minimum temperature !

The bubble foil dome-tent coating with OSMA Tech insulation coat ( ~ Insuladd / Radiance )and the maximum heat need we can expect with 2000 Wattp  !
     2000 Wp heat / 25 sqm = 80 Wp/sqm


2000 Wp heat by C.O.P. 5x IR heat pump concept ~ 400 W electric

2000 Wp heat by C.O.P. 10x Graphit Nano Plates heater ~ 200 W electric

2000 Wp heat by OSMA Tech heater ~ 300 W electric




Let us take the 400 W x PE-F 1,8 ( I mean similar in the US caused coal/nuclear mix) and  we get :
     720 Wp PE / 25 sqm ~   29 Wp PE/ sqm

With a ' real overunity transformer' C.O.P. 2x this shelter has in winter Nearly Zero Energy Building standart

                                                               C.O.P. 3x this shelter has in winter Passive House Energetic standart



shelterdomes.co.uk given shelter-dome production costs :                300 US$ each

Osma Tech coating we do calculate with  5 US$/sqm ground area : 125 US$

4 electric 500 W IR heat pumps with 100 US$ each :                            400 US$

'real overunity transformer' :                                                                          ?  US$


For nominal 750 Watt I calculate the Imris generator production costs ( 9 Kg device) with 300 Euros,so endconsumer would have to pay in minimum for ' open source'-condition but development costs including 450 Euros,net !
Compared conventional ' patent rights'-saved 500% average market margin price  : 1500 Euros,net

300 + 125 + 400 + 530 ( Euro to $) = 1355 US$/25 sqm mass production ' shelter kit' selling price

                                                                  ~ 55 US$/sqm

Under 50 US$/sqm  to under 40 US$ per square meter living area ,all inklusive : who makes it possible ?




After jovoto ' 300 US$ house '-competition now a ' 100 US$/sqm Zero Energy & Water building '- competition ?!





The UN would like to see cheap shelters,with habitants air conditionized comfort

This is a 'soft top'-dome shelter,
changing to hard top 'Burning Man'-hexapod or hexayurt  www.hexayurt.com
later to foam-igloo by Iglu-Village ,a german shelter inventor/Garmisch-Partenkirchen ~ Olympic Village 1972 'casanova'-modules by Peter Huebner

www.planetaryrenewal.org 1 US$/sqft   

When cubical a 20 sqm chamber has 65 sqm surface area ,as dome = x 0,7 ~ 45,5 sqm /0,093 ~
                          490 sqft surface x 1 US$ ~   25 US$/sqm living area material construction costs
WASP 'GAIA' 900 Euros for 20 sqm 3d house printing,jovoto 'geopolymer'-house sqm costs ?
New Mexico : Navajos : Adobe buildings ~ geopolymer construction

                              ancient technology and techniques

www.john-perlin.com about solar history ,

New Passive House movement - 'father ': Bo Adamson ,found in China and Portugal the promoting Ideal

Socrates architecture as Ideal for reconstruction  : St.George secondary school,Wallasey /Merseyside/England

' .... the first building in the world to be heated entirely by solar energy ....'  built 1961

WTF

Offline lancaIV

    elite_member
    Hero Member
    ******
    Posts: 3828
        View Profile Email Personal Message (Offline)

Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22647 on: 04 November 2020, 11:14:50 »

    Quote

AlienGrey,could you give me a cost list about  the used material input in your ' Kapanadze prototype'
by actual commercial selling prices to get an idea about the later KWh-generation costs ?

Probably our FE-solutions in comparison are not far away in energy generation price  !
Sincerely

p.s.:
in private households = b2c  electricity prices - global average 15 ¢/KWh -  are 85% from total costs part
                 
                                                            = service salary related,

changing to DIY-generation this part decreases,it goes down :  ~ 50% or 1/2 the actual b2b electricity delivery costs about 5,5¢/KWh = average 2,5 ¢/KWh later

FE-generator production costs and selling price :

100 units ' Name-Label Trademark' material,ready to use

30 units  ' No Name Label Trademark' material ,ready to use

15 units ' No Name Label Trademark' material ,as DIY-kit

7,5 units 'No Name Label Trademark' material,as DIY-kit,fob factory


Why to pay 100 units when I can get for 7,5 units from all cases same production line ?

Over 90% FE-device material  investment costs reducing means over 90% KWh-generation costs reducing !
Economics is easy ! Not : buying cheap and selling more expensive
         
                                    But : buying cheap and generating cheap - for self-use

We can decide to pay 50 $/hour professional engineers costs or alternatively by global market comparison 5$/hour !
When you buy an average compact class car which value has it by the end of its life,after +- 12 years  ?
Car pure material value ( today new cars with increasing quote from recycling material = scratch reuse)  at the beginning : less than 1$/Kg
By our 100% recycling target economy we have to differ ' sustainable value' definition !
To pay too much = time and ecology waste

I know the $ difference : US$ versus HK$ from €-view
One global important for the new/scratch raw material market,the other for production/transformation  price/Kg
« Last Edit: 04 November 2020, 14:44:08 by lancaIV »
Logged

[AlienGrey]

Deleted by user.

[lancaIV]

LANCA1V TAKE NOTE

BEFORE YOU GO AROUND POOPING OVER THE WRONG THREADCAUSING DISRUPTION

WHY NOT CRATE YOUR OWN MEWS TREAD AND DISRUPT THAT WHERE ONLY YOU

AS A TROLL CAN GRAFFITI AS MUCH IN YOUR OWN THREAD.

i MEAN.  WHAT IS IT YOU DON'T YOU UNDERSTAND ABOUT THE DIFERANCE BETWEEN A NEWS CHANNEL

AND A BUILDERS CHANNEL IE ARE YOU STUPID OR A PLAIN TROLL?

Yes,AlienGrey,I do understand the-  by your intellectual stage ' DIFERANCE', by mine : difference !
And this makes the ' builder' motivation,serenity and success quote difference !
But beside this : what is your official ( approved ! By engineers lab and estatal office ) technical standart improvement  success during your 'builder'- R&D ,
since your first day as overunity-member ?

'pipe dream' becamed reality ?

Rotative or static transforming device ? C.O.P. ≥ 1 ?


Sincerely

p.s.: troll and trollen ,anglo-saxonic: to depart ( under protest,unwished, ashamed )
         to differ from Islands 'Troll'-s

         trollen und trotten

        Some here behaves like 'Trott'-s,Alltags-Trott,

        ugs. 'Trottel'     

       Humoristisch-liebevoll : damischer Kerl,Rindvieh  Unterste Schublade: sozial und technisch unversiert
       stumpfsinnig ~ stupere/stupidus       Al Bundi : Dumpfbacke= Kelly B. ~dimwit/pumpkin ~ stupid


      AlienGrey,I took note/notation  ! And compared reflexive !
   

[Floor]

@  IonLady

https://sites.google.com/site/aferlab/home/patrick-kelly---a-practical-guide-to-free-energy-devices

See Chapter 3 below

  good hunting
      and
        best wishes
    floor

[NdaClouDzzz]

Can anyone translate the attached screenshot of some YT comments into a schematic, and comment on the validity and viability of such a scheme?