Lords of the Ring

[giantkiller]

I don't know how to start this and I am not poking at anybody personally, but:

yOU can detonate fluids, gasses, shake metal and you are still trying to interface the industrial age up to the virtual energy age where Radiant energy is. The cost is too high.

The circumferal devices that produce RE are inexpensive, small, very powerfull, well contained. The COP verses mass is unequivocally huge(no other technology or mass can touch this). All the physical proof is in the videos. The cost is extremely economical and they are definately scalable whether in size or stack. And no moving molecular parts. Atomic yes. Consider the last 2 statements repeated. The coil will put the industrial age to rest. We gotta stop blowin shit up. It is a tremendous loss all the way around.

Example: SM powers up the SM6 on a very expensive dining room table, no damage. The TV has no interferance. The dogs are not barking. The humans in the room are stil alive. Nothing burns up. The devices are handled in plain sight, while powered on! The FAA, FCC or the federales do not show up. No noxious gas clouds. Nobody blown off their feet.

There is definative proof that Otto, Roberto, I, Jason, and a few nameless have produced RE on their benches. We just collect it. It is just there for the taking. I will make the bold statement that those mentioned stand right beside Tesla himself. RE was Telsa's misunderstood event. The people at that time just didn't get it. Do you make this same mistake 120 years later?

Alien life forms look at gasoline like we look at rubbing 2 sticks together.

So if there is anybody new reading this take heed on the direction you take. There were alot of directions to take. I made RE my choice from the start and glad of it.

--giantkiller. Back to my RE setups now. I have 3 coils that produce RE. I could even say they work but not with your stuff. Why would I use a UFO to light a torch?

p.s. OK, I'm done puffin'.

[Grumpy]

We gotta stop blowin shit up.

Example: SM powers up the SM6 on a very expensive dining room table, no damage. The TV has no interferance. The dogs are not barking. The humans in the room are stil alive. Nothing burns up. The devices are handled in plain sight, while powered on! The FAA, FCC or the federales do not show up. No noxious gas clouds. Nobody blown off their feet.

There is definative proof that Otto, Roberto, I, Jason, and a few nameless have produced RE on their benches. We just collect it. It is just there for the taking.

So if there is anybody new reading this take heed on the direction you take. There were alot of directions to take. I made RE my choice from the start and glad of it.

Stop Blowing $#!+ up.  So true.

None of the rings mentioned or alluded to are wound and driven like SM's.  Other than heat, SM's rings don't appear to have any issues.

When you close the loop, what protects it from running away?  No ballast inductor or chokes?  No capacitor in series - which Tesla found increased the effect and protected the generator.  A fuse at least?  Are you just poking a wire into the rhino's ass?

This is what the Rhino thinks of that:   

EDIT: Removed Rhino video by request.

[giantkiller]

Well I hooked the Turbo coil up with one frequency with all the vertical sections in series and only used the feedback winding on the upper Helmholtz to the middle horizontal 30awg winding. The scope at the opposite of the horizontal winding and grounded. No connections to the Helmholtz's / collectors yet.
Driven at 12v, .25a with output of 350v paired spikes with follow on ringing. Coil and fet run at 100 degrees. Tinglies and skin faeires at six inches. Neos do not respond so no RF. Scope shots later and frequencies will be posted. Although not necessary. I am chasing RE and I know where find it and how to do it. This is the stage after the electronic stage.

I am very pleased with test. Next I will connect the bottom feedback in tandem or opposing and see what happens. No sparks means lower frequency from the higher RE we would expect.
Then I will segregrate the vertical segments and drive with 3 frequencies. This will impose the phase cancellation into the drive. The fun should get better.

I switched to the Turbo coil because I saw wonderful, exact control imbedded into it. The notches cause the wing to be broken up into sections thereby reducing the emmisions. The collectors are smaller than the ECD or GK4, less copper, lower RE generation. And overall visibilty of the design. Whew. One sweet exposure!
@ Marco, Very nice coil!

I will also produce the 'Singing TPU #3' video lesson this weekend. Some Italian engineers asked me to keep on producing them. The ones with the Ebow and guitar.

I am very pleased with this setup. It is similar to the GK4 tests in January only safer. I think.
And would you believe there are only four of us with these coils. Marco, IS, Jason and I. Marco also posted the circuit for this drive.

--giantkiller. I was going to go to bed early too.

[innovation_station]

gk i have a good collection of those coils that i made i also built a tool for a rutor table to notch the pvc cores i posted it a wile ago  and i have many blanks to build more but you see the problem with all of my coils i have built so far it the mass to mass matching of the copper none of my coils are tuned like they should be as that is 1 of the problems im having after i get it tuned propor and wound proper then all the rest will fall into place and im sure of that and i dont think im alone in this spot so any help on a perfectly tuned unit would clear up many of my problems and others problems too

so i guess with this and all coils i have made this is where i stand at the moment but i will in time get past this and advance

is

[giantkiller]

gk i have a good collection of those coils that i made i also built a tool for a rutor table to notch the pvc cores i posted it a wile ago  and i have many blanks to build more but you see the problem with all of my coils i have built so far it the mass to mass matching of the copper none of my coils are tuned like they should be as that is 1 of the problems im having after i get it tuned propor and wound proper then all the rest will fall into place and im sure of that and i dont think im alone in this spot so any help on a perfectly tuned unit would clear up many of my problems and others problems too

so i guess with this and all coils i have made this is where i stand at the moment but i will in time get past this and advance

is

Finish the Turbo coil you have and leave the m2m for later. Progress would be better than unfinished perfection. You won't be sorry. Your test with the one layer GK4 showed me that power can be pulled off. My 3 layer coil actually became a multipoint discharge unit. Otto's wiring actually showed me to feed the single point discharge back into the coil. I am doing the same with the Turbo coil. It is much cleaner and defined as far as the simitry of the windings. I hook the other parts of the coil into the operation tonight. I am psyched about this big time.

--giantkiller.