Chas Campbell free power motor

[Aphasiac]

The pursuit of OU is such a hotbed for conspiracy theorists. But the way I see it, I'm not letting go of this thread until Ash does. Let the chips fall where they may. Eventually, whether in this thread or another one, it's going to happen.

Great work, Ash! Keep on it.

--Mark.

[d3adp00l]

That is one thing that kinda bugs me. This machine is supposed to be o/u but no one has tested it with a simple clamp on a/c amp meter?!? That would have been the first thing I did. Check the amperage draw going into the machine and test the current draw going out to the tools he supposedly ran off the machine, if in is less than out then you have o/u if not you don't. It seems the first logical test for a person to perform on a machine.

[Dingus Mungus]

That is one thing that kinda bugs me. This machine is supposed to be o/u but no one has tested it with a simple clamp on a/c amp meter?!? That would have been the first thing I did. Check the amperage draw going into the machine and test the current draw going out to the tools he supposedly ran off the machine, if in is less than out then you have o/u if not you don't. It seems the first logical test for a person to perform on a machine.

Well its definitely putting out more amperage than in;
If it is indeed only a 800w AC motor...

At 100% conversion thats equivelent to 120v @ 6.66 amps. The working drill/saw would eat that up no prob. BUT! My assumption is he's depositing large ammounts of energy in to a flywheel and then the excess amperage would be coming from slowing down the flywheel. This is why I want the Killawatt meters to be used. So we can track by exact RMS wattage and power factor, and compare ALL input to ALL output. No time sampled multimeter will help disprove my theory. I've already offered to pay for the required meters. Now its just time to sit back and wait for evidence or the complete lack thereof.

~Dingus Mungus

[ashtweth_nihilisti]

Well what about this

After speaking with him for over 2 hours, (man the old dood can talk  )
He said his secret in driving his electric motor is not to load the shaft what its rated for

IE, say his 800 watt 3/4 horse power motor is rated to spin at 1450 RPM

He said he never puts a load on it that REQUIRES 3/4 horse power and NEEDS to spin at 1450 RPM, (although can as obviously the 4 pole motor will any ways)

He said his pulleys always are made and load to not load the rating of the motor, this is ONE of his secrets and he states a good tip to keeping an electric efficient.

Now he has nearly finished his perpetual wheel, i convinced him to let us measure his motor Gen set, he has to re assemble it into, ill get the measurements for us all.
Ill be filming his Wheel which is run by 12 pool balls all numbered, i asked him if i can film it working then he can ope it to show no hidden DC gen

took a while but he agreed.
Should be i the next 2 weeks guys fingers crossed 

[tao]

took a while but he agreed.
Should be i the next 2 weeks guys fingers crossed 

Just wanted to say thanks for the perseverance and effort your putting into this.

Any effort that CAN bring us closer to FE, is no effort wasted.