Overunity.com Archives is Temporarily on Read Mode Only!



Free Energy will change the World - Free Energy will stop Climate Change - Free Energy will give us hope
and we will not surrender until free energy will be enabled all over the world, to power planes, cars, ships and trains.
Free energy will help the poor to become independent of needing expensive fuels.
So all in all Free energy will bring far more peace to the world than any other invention has already brought to the world.
Those beautiful words were written by Stefan Hartmann/Owner/Admin at overunity.com
Unfortunately now, Stefan Hartmann is very ill and He needs our help
Stefan wanted that I have all these massive data to get it back online
even being as ill as Stefan is, he transferred all databases and folders
that without his help, this Forum Archives would have never been published here
so, please, as the Webmaster and Creator of these Archives, I am asking that you help him
by making a donation on the Paypal Button above.
You can visit us or register at my main site at:
Overunity Machines Forum



The Brnbrade Coil/Overunity?

Started by Bruce_TPU, July 01, 2007, 12:14:40 AM

Previous topic - Next topic

0 Members and 7 Guests are viewing this topic.

Print
Go Down Pages 1 ... 20 21 22 23 24 ... 116
User actions

EMdevices

#105
July 02, 2007, 10:32:24 AM
Ok, you can even see the orange wire crossing upwards to reach the top tab.

I know we can't prove a connection from a photo, but I don't see any blatant deceit... yet.

I'm just hoping he comes clean on the yellow wires down bellow.

EM

Bruce_TPU

#106
July 02, 2007, 10:33:37 AM
Someone tell me I am wrong and I will erase my prior statements. 
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

hartiberlin

#107
July 02, 2007, 10:36:09 AM
What role could the 2 alufoils per rod can play ?
As he thus shields the electric fields from each coil, but not the magnetic,
maybe it is a key to just have the electric field for a transformer effect but not
the electric field ?
What about eddy currents inside the alufoil ?
Stefan Hartmann, Moderator of the overunity.com forum

Bruce_TPU

#108
July 02, 2007, 10:38:25 AM
@ EM

It would appear to me that the two orange wires are behind the bulb.  Look close, and you will see nothing on the three prongs except for the two jumpers.  We need more clarification from brnbrade, how everything is wired.

Cheers,
Bruce
1.  Lindsay's Stack TPU Posted Picture.  All Wound CCW  Collectors three turns and HORIZONTAL, not vertical.

2.  3 Tube amps, sending three frequency's, each having two signals, one in-phase & one inverted 180 deg, opposing signals in each collector (via control wires). 

3.  Collector is Magnetic Loop Antenna, made of lamp chord wire, wound flat.  Inside loop is antenna, outside loop is for output.  First collector is tuned via tuned tank, to the fundamental.  Second collector is tuned tank to the second harmonic (component).  Third collector is tuned tank to the third harmonic (component)  Frequency is determined by taking the circumference frequency, reducing the size by .88 inches.  Divide this frequency by 1000, and you have your second harmonic.  Divide this by 2 and you have your fundamental.  Multiply that by 3 and you have your third harmonic component.  Tune the collectors to each of these.  Input the fundamental and two modulation frequencies, made to create replicas of the fundamental, second harmonic and the third.

4.  The three frequency's circulating in the collectors, both in phase and inverted, begin to create hundreds of thousands of created frequency's, via intermodulation, that subtract to the fundamental and its harmonics.  This is called "Catalyst".

5.  The three AC PURE sine signals, travel through the amplification stage, Nonlinear, producing the second harmonic and third.  (distortion)

6.  These signals then travel the control coils, are rectified by a full wave bridge, and then sent into the output outer loop as all positive pulsed DC.  This then becomes the output and "collects" the current.

P.S.  The Kicks are harmonic distortion with passive intermodulation.  Can't see it without a spectrum analyzer, normally unless trained to see it on a scope.

wattsup

#109
July 02, 2007, 10:39:13 AM
@btenzer

Keep cool.

The battery lines are going to the yellow going to the terminal then to the two coils in mobius.

The orange are going to the light along with the two probes from the meter.

OK you can't see the battery wire completely going to the yellow but this is only a lack of overall detail in the picture. Plus if you consider the angle of the yellow versus the battery wires, we can presume they are connected otherwise the battery wires would simply fall straight down off the side of the table.

Also, there is no sound input on this test so he is producing DC-DC and that's why the meter is at zero because he is on the AC selector.

@Brnbrade

Whenever you take pictures it is important to show all wires to be on the table and not falling off the side.

Be carefull if you plug the sound and produce the AC it could blow the bulb.

Good work.
Print
Go Up Pages 1 ... 20 21 22 23 24 ... 116
User actions