The Lee-Tseung Lead Out Theory

[ltseung888]

The Prayer with God in my heart

Tseung: “Dear God, now the Lead-Out Energy is a certainty.  The Yu Oscillator can gain energy from the Howard Johnson type magnetic actuator.  If the oscillator is changed to a large wheel, there is no need to flick the magnets around.  Energy will be gained every time via passing the stationary magnetic actuator.  There is no violating the Laws of Physics if we accept that the extra energy can be lead-out  from the electron motion of the surrounding.”

God in Heart: “The coming conference in Hangzhou will have a few working overunity devices.  You have the Tong wheel that can be shown to the World now.  Instead of the Howard Johnson Actuator, you have the Pulsing Coil.  You have already shown that the energy gained by the Wheel is more than that supplied by the Pulse.  There will be the Bedini 10 Coil device which you can improve with ease.  There is a Witts.ws type fuelless motor.  You may even have the Chinese Government funded Wang Generator.  If the Chao Car were there with the Liang engine, scientific acceptance will be 100%.”

Tseung: “Is the World ready for non-polluting, inexhaustible and virtually free energy?”

God in Heart: “Are you ready to introduce Lead-Out Energy to the World?  Are there any doubts in your mind?”

Tseung: “Lead-Out Energy is an ABSOLUTE CERTAINTY.   It is derived from the Law of Parallelogram of Forces.  Horizontal energy = horizontal force x horizontal displacement.  That is the supplied energy.  Vertical energy = vertical force x vertical displacement.  That is the lead-out gravitational energy via the tension in the pendulum string.”

God in Heart: “The World may change for the better or for the worse.  Newton introduced his Laws of Motion.  Science and Engineering had a solid foundation.  England used that to its advantage and expanded its Empire.  To the English, it was good.  To the conquered nations, it was bad.”

Tseung: “If I introduce the Lead-Out Energy technology to the entire World, will that prevent one nation dominating others?  Can I prevent the sad history of colonization from happening again?  Can every poor nation be wealthy because of this technology?”

God in Heart: “You will have to give up personal greed, pride, pleasure of the flesh and all things the average human being long for.  You will be insulted.  You will be ridiculed.  Scientific facts will be twisted to show that you are an idiot.  You will lose your financial security.  Your family will suffer.  You will be treated as a crack pot similar to Nikola Tesla.  Are you ready for that?”

Tseung: “The spirit is willing.  The flesh is weak.”

[ltseung888]

Greetings,                   

I am a student studying Green Tech at the Scottish Agricultural University. In my field I deal with communicating between zero fossil energy development companies and entrepreneurs who have the means to distribute them in Baltic countries.

A week ago I was invited by the French ambassador, who is in charge of organizing an annual Science conference in Estonia, to make a presentation about new and improved ways of enhancing energy production. I accepted the challenge and am going to present my studies on HHO, fuel cells and a potential for full magnetic motors to an audience that I believe is of great benefit to your company.

I have asked for permission from various directors to introduce their companies to the Franco-Estonian community. And I would be honored to present your company as well, for I share the same vision that your company is built on.

I am of Estonian origin, lived in France for five years, and after having completed my bachelors at the Estonian Business School I moved to Scotland to continue my research.  By the end of this academic year I will return to Estonia to work for the main Estonian Energy provider to promote Alt. energies.

I have attached a program the ambassador has put together, and if you find the audience to be of interest to you then please contact me. I will have to send an outline of my presentation by March and include which companies I will be introducing.

Thank you for your consideration,

May this be the will of the Almighty to spread Lead-Out Energy to the World.  A small Country like Estonia posts no threat to the World. 

[ltseung888]

From Estonian Student

Thank you for such an immediate response.

I must tell you that although I do not intensively pursue the study of perpetual motion and magnet motors, I do not disregard the possibility. Mainly because we do not live in a closed system and because progress to understanding comes through experimentation and collective thought.

Most people that I know who talk about alternative energies, are limited by their imagination to think of anything else than solar, wind, geothermal, and nuclear energies. Yet again they do not let themselves study what the physics behind all this. It is accepted as common knowledge that perpetual motion is impossible for it is advertised so. I understand this point of view, but I do not admire it. The way of thought that I do admire is the collective one. To take the effort to bring out-of-the-frame ideas and knowledge so that those who wish may learn to grow towards free energy systems shows leadership in the right direction.

You are doing a valuable thing that affects people on a global scale and this is priceless. I will stand by these values for only through this kind of a mind frame will there be true peace.

I will most definably follow your web site and am honored to work alongside the values you represent, Sir.

I will be looking forward to seeing what your presentation at Hangzou will bring.

Respectfully,

Dear Estonian Student,


I took the liberty of correcting some typos and other mistakes in your email before posting.  I would like to suggest a simple experiment that you can perform before your conference.  (We shall do the same before Hangzhou).


Please examine the Yu Oscillator in this forum.  Mr. Yu sent a magnet through a Howard Johnson type actuator or magnetic array to gain kinetic energy.  His technique was via oscillation and to rotate the magnets at the end of each swing.  It should be a simple task to have a rod pivoted in the middle and have two magnets at the end.  The two magnets can pass through the magnetic array to gain kinetic energy with simple rotation of the rod.  There will be no need to rotate and change direction of the magnets.


This experiment can result in a rod rotating after an initial turn and gaining energy by passing through the magnetic array.  The rotational speed will pick up until some balance with frictional force and air resistance is achieved.  You may then have a perpetually rotating rod.  Since there is a gain of external energy, no Physics Laws are violated.


This may be a standard experiment for understanding Lead-Out Energy.


Good Luck.

[ltseung888]

TWM Technology
They have a motor that uses both poles of a Magnet.  That is similar to the Bill Muller approach.  The next Tong Wheel is likely to have a similar approach.  Our Pulsing technique is different from theirs.  I believe that they did not have the Lead-Out Energy Theory to guide them.  Much of research was directed at high speed rotation similar to Bedini.  We can definitely help to improve that.  They said that they have an overunity prototype.  The information is available at:
http://peswiki.com/index.php/News:TWM_Technology:February_2010_Correspondence

We've (TWM Techonolgy) basically combined all the greats: Perendev, Morey, Bearden, Bedini. We've been successful in spinning a device that uses the vacuum to our benefit, but we've also combined the torque from a mechanical shaft as well. This is an improvement, A significant improvement that offers the best of both sides: mechanical torque, and Free Space Electrons.

The potential is still yet to be revealed.

Last week a group told us that the money would be in providing a low RPM generator. So we (Timmy and group), combined our efforts and designed and started producing our motor as a generator â€" just a generator â€" and we accomplished that. The generator could be spun a very low rpms (e.g. 5 rpms) producing DC current. The same generator could be spun at high rpms to produce massive AC current. The design and details have been completed, and we will have this generator ready within the next 2 months.

All that was accomplished by our group in one week. (Just imagine what we could do with the proper backing!!).

Also, the generator will be ten times lighter than conventional wind turbine generators. Our device will not need a gear-box, and will have great worth to the wind / energy industries.

Thanks for always being there for groups like us. If you don't mind the comment, I would like point out that it's great that you do what you do. I was just telling a friend yesterday how cool it is that you are the medium or the middle-man so to speak when It comes to helping companies like ours that have great ideas that could potentially change the world for the better. It's cool that you get people excited about this type of tech.

However, it would be even better if we could organize a group of VC's or maybe our government could implement a program that lays down a foundation in each state. That would provide small businesses the needed helping hand to generate interest or capital, they would decide what is worth the effort. But we as small corps, struggle to get somewhere. And that is why a lot of groups either give up, or don't make their dreams a reality.

I found that there are a lot against groups like ours. We have the professionals telling us that overunity is impossible. STRIKE ONE. That is why I was trying to back peddle because the ones I thought I needed to convince were the big VC guys. They are clueless. They give you two minutes to describe everything in a room of other struggling entrepreneurs. Then they critique you like it's an episode of shark tank. Then they say "I talked with someone [who says that the laws of] thermodynamics say that, "that is impossible". End of story, They don't even give us the time of day after an engineer or some respected professional says It cant be done.

Then STRIKE TWO would be the controlling interests that don't want a device like this to cut into there profits (e.g. oil industry, political corrupts, etc.). I don't like to dwell on the negative. however it's part of our struggle.

We as private individuals have dropped over $250,000 into this development over a five year period, and that is just the beginning. We knew that we might never make it, and that our efforts may be in vain, but we kept on because of the belief in what were doing. When doing something new or when pioneering new technology, there is a sense of unknown, and that is scary to us as well as to investors. And that somewhat prohibits the advancement. On the other hand, sometimes that's what sets you apart from the rest.

China will win the “overunity race” if such inventors in USA were not supported.  Our Lead-Out Theory already pointed out the practicality of such devices.  Our 2-3 watt Tong overunity wheel is available for verification.  The inventors of the 225 HP Pulse Motor was at one time not supported by the USA Venture Capitalists.  They should be the leader in this field.  Now, who knows?

[ltseung888]

Waiting for Official approval before release.